How to use the one-touch window function in Lavida?

2 Answers
Jane
07/28/25 3:51pm
Lavida's one-touch window function usage method: 1. Close the windows; 2. Continue to pull the window switch upward, and the one-touch window function can be set after 10 seconds. The one-touch window function in Lavida is mainly designed for the convenience of drivers and passengers, primarily to prevent drivers from being distracted by operating windows and to improve safety. One-touch windows generally have an anti-pinch function to avoid hand injuries. The dimensions of Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.5-liter naturally aspirated engine, with a maximum power speed of 6000 rpm and a maximum torque speed of 3900 rpm.
Was this review help?
18
2
Share
LaIsabella
08/11/25 11:04pm
The one-touch up/down window function of the Lavida is super convenient to use. As a daily driver, I often use it to enhance driving comfort. First, sit in the driver's seat—the window buttons are usually located on the door panel. Press the button lightly and hold it for about a second, and the window will automatically roll up or down to the top or bottom. If you just want to open a small gap, a quick tap will stop it at the desired position. But for fully opening or closing, a light press will complete the action automatically. This feature is especially practical when getting in/out of the car or during weather changes, eliminating the need to hold the button and stay distracted. I frequently use it during my commute to close all windows for security or open them slightly for ventilation. Note that the function only works when the vehicle is powered on. If it malfunctions, it may be due to dust stuck in the button or a temporary system glitch. This thoughtful detail in the Lavida's design is very user-friendly, and I recommend new owners familiarize themselves with the operation.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

How to Solve Black Smoke from Diesel Vehicles?

Solutions for black smoke from diesel vehicles are as follows: 1. Remove the air filter and observe the exhaust smoke color. If the black smoke condition improves, the issue is caused by severe contamination of the air filter. 2. Check if the fuel supply timing is too early; if so, adjust it. 3. During engine operation, conduct a cylinder-by-cylinder fuel cut-off test. When cutting off fuel to a specific cylinder, if the engine speed decreases, black smoke significantly reduces, and knocking sounds weaken or disappear, it indicates excessive fuel supply to that cylinder. If the engine speed changes little but the black smoke disappears, it suggests poor spray quality of the injector in that cylinder. After identifying the faulty cylinder, disassemble and inspect the injector. If necessary, replace it with a new injector for comparison. If the issue disappears with the new injector, it confirms a fault in the original injector.
2
5
Share

Can a car be registered under two names?

A car cannot be registered under two names; it can only have one owner. In the traffic management bureau's system, a vehicle must have a name, and it must be unique. The vehicle's registration certificate must also display the owner's name, which is likewise unique. When issues arise with the vehicle, such as accidents, hit-and-runs, or inquiries, there can only be one corresponding person—the owner named on the registration certificate. Legally, a vehicle as property can be jointly owned, but this is limited to property rights. In principle, as long as it is a legal marriage, the car is considered joint property regardless of whose name it is registered under. Therefore, the owner can only establish property rights through notarization for purely property-related purposes.
6
2
Share

What are the penalties for not driving in the designated lane?

Driving not in the designated lane will result in a deduction of 2 to 3 points and a fine. Motor vehicles passing through intersections controlled by traffic signals should follow the prescribed rules. At intersections with designated lanes, vehicles must enter the appropriate lane based on their intended direction of travel. On some road sections where turning or U-turns are not allowed and no signs are installed, yellow prohibition markings are painted on the lanes to warn drivers that turning or U-turns are not permitted on these sections. When approaching an intersection, pay attention to the directional markings on the road. If you intend to turn left, choose the leftmost lane; if you intend to turn right, choose the rightmost lane; for going straight, choose the middle lane. It is important to select the correct lane for your intended direction of travel in advance. If you accidentally choose the wrong lane and need to change lanes, do not force yourself to continue in the original direction. Instead, make a U-turn or detour ahead and then choose the correct lane to proceed.
7
3
Share

How to Use Seat Belts Correctly?

Here are the instructions for using seat belts correctly: 1. Adjust your sitting posture. The distance between you and the steering wheel should be such that when you stretch your arms forward, your wrists rest comfortably on the steering wheel. Your legs should be bent at approximately a 90-degree angle, which allows for more flexible reactions in case of emergency braking. 2. Adjust the seat belt. Hold the buckle and latch, then slowly pull out the lap belt. Ensure the shoulder belt crosses over your shoulder and fits snugly against your neck and body. Then, insert the seat belt buckle into the latch until you hear a click. 3. Avoid contact between the seat belt and hard or fragile items. For example, glasses, pens, or keys inside your clothing. Also, prevent the seat belt from rubbing against sharp objects to avoid damaging it.
14
3
Share

What is the pressure of a car air conditioner in kilograms?

Under normal operating conditions of the air conditioning system, the low pressure is generally between 1.0—2.5 bar, and the high pressure is between 15—18 bar. Below is a detailed introduction to the car air conditioner pressure values: 1. The normal range for detecting car air conditioner pressure is generally that the high pressure should not exceed 1.7 MPa and should not be lower than 1.3 MPa. 2. The normal range for low pressure is generally not lower than 1.15 MPa and not higher than 1.25 MPa, which is considered normal. If the low pressure is higher or lower than this normal range, it indicates that the expansion valve adjustment is abnormal. 3. The air conditioning gauge usually has two dials: a blue one for low pressure and a red one for high pressure. If the ambient temperature is higher, the pressure should be higher; if the ambient temperature is lower, the low pressure should also be appropriately lower.
13
4
Share

Does adding a sporty body kit to a car require registration?

Adding a sporty body kit to a car requires registration. Here are the specific details: Introduction: Modifying a car's body kit is legal, but the modifications must not alter the original length and width of the vehicle. Additionally, the modifications must be registered with the vehicle management office within ten days, and the car can only be driven on the road after obtaining a new vehicle license. Registration process: Call the vehicle management office where the car is registered to schedule an appointment for vehicle registration; bring your ID card, vehicle license, and green book to the vehicle management office for photos; go to the designated window to collect the photos and make a copy of your ID card; fill out the "Vehicle Modification Application Form," then submit the photos and form to the review window and pay the fee; wait for the traffic police to inspect the car. After the inspection is confirmed correct, you can go to the designated window to collect the new vehicle license, completing the registration process.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.