How to use the one-touch up/down function for the windows on the Changan CS55 with the remote control?

2 Answers
OChase
07/28/25 7:43pm
Directly pull up the window button to raise the window to the top, then hold your finger for 3-5 seconds before releasing. Next, press the window button to lower the window completely, again holding for 3-5 seconds before releasing. Then, test the one-touch up/down function, which should now be operational. Below is more information about the one-touch up/down window feature: 1. The one-touch up/down window function refers to a system where the car window glass can be controlled to fully open or close with a single button press. The reason for this issue is likely due to a momentary disconnection of related components causing power loss and function failure. Simply resetting the one-touch up/down window function will resolve this. 2. The one-touch window control has two positions. When you want to open the window partially, use the first position. To fully open the window, press the button all the way down until you hear a slight sound and feel feedback, then the window will automatically lower.
Was this review help?
17
2
Share
VonWilliam
08/12/25 12:38am
I've been driving the Changan CS55 for two years now, and the remote one-touch window control is a handy little trick—practical and convenient. The method is simple: press and hold the unlock button on the key fob without releasing it. After a few seconds, all the windows will roll down. To close them, just press and hold the lock button. I often press the unlock button in advance before heading downstairs to lower the windows for ventilation, making the car less stuffy in summer. Remember not to stand too far from the car; keep the distance within about five meters. If the remote responds slowly, it might be due to a low battery that needs replacing. For safety, avoid using this feature blindly on windy or rainy days to prevent water from getting inside. It's also recommended to regularly check and clean the window tracks for maintenance. Overall, the operation is quick and straightforward, making daily driving hassle-free.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What should be noted when overtaking a bicycle traveling in the same direction?

When overtaking a bicycle traveling in the same direction, the following precautions should be taken: 1. Pay attention to observation: Observe the dynamics, slow down, and maintain a sufficient safety distance. 2. Reduce speed: For driving safety, try to avoid blind spots as much as possible. Avoid obstructing the rear windshield with objects to maintain good visibility. Adjust the rearview mirror's field of view to the maximum extent, or consider installing a wide-angle rearview mirror inside the car. These methods can help minimize the occurrence of blind spots. 3. Driving in rainy weather: When driving in the rain, maintain control over the direction, speed, and visibility. Use low gears as much as possible, such as first or second gear, and keep the speed below 20 or 30 kilometers per hour.
18
3
Share

Which country does Spyker belong to?

Spyker is from Zeewolde, the Netherlands. The models under Spyker include the Spyker C8, Spyker D12, and Spyker B6. Taking the Spyker C8 as an example: it is a sports car equipped with a 4.2L naturally aspirated engine, producing a maximum horsepower of 405 hp and a maximum torque of 480 Nm. It features tire pressure monitoring, front seatbelt reminder, electronic stability control, brake assist, and rear radar. The front and rear suspensions of the Spyker C8 both utilize F1 racing technology double-wishbone arms, with a mid-engine, rear-wheel-drive layout, and a 6-speed automatic transmission. The car measures 4617mm in length, 1952mm in width, and 1270mm in height, with a wheelbase of 2727mm. The body type is a 2-door, 2-seater hardtop sports car.
3
4
Share

How to Reset the Maintenance Light on Mitsubishi Outlander?

The method to reset the maintenance light on the Mitsubishi Outlander is as follows: 1. Turn the key to shut off the engine; 2. Locate the trip computer control button on the left side of the center console; 3. Press and hold the button for more than 5 seconds, then press the ignition button to start the vehicle. At this point, the maintenance light will be reset. The Mitsubishi Outlander is a compact SUV with a maximum engine horsepower of 166, equipped with a CVT transmission. The dimensions of the Mitsubishi Outlander are 4705mm in length, 1810mm in width, and 1710mm in height, with a wheelbase of 2670mm. It has a top speed of 190 km/h and a fuel tank capacity of 63L.
16
3
Share

What is the method for tightening a tire valve core?

The method for tightening a tire valve core is to turn it clockwise inward and then put on the valve cap. The functions of tires are: 1. To transmit driving force, braking force, and steering force to achieve vehicle operation; 2. To support vehicle loads; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging vehicle components. Tire maintenance methods include: 1. Regularly cleaning stones stuck in tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Adopting careful driving habits by choosing smooth road surfaces, avoiding objects that may puncture or scratch tires, and steering clear of chemical spills that could corrode tires.
14
0
Share

What does the three locks on an off-road vehicle mean?

Off-road vehicle three locks refer to three differential locks, which can significantly enhance the off-road performance and escape capability of the vehicle. The three locks on an off-road vehicle are: front axle, center, and rear axle, totaling three differential locks. The main features of an off-road vehicle include a non-load-bearing body, four-wheel drive, high ground clearance, tires with good traction, elevated exhaust pipes, high horsepower, and sturdy bumpers. Precautions when driving an off-road vehicle include: 1. Remember that mud splashing and wheel spinning are major taboos in off-roading. Know when to retreat. If individual wheels start spinning in the mud, stop immediately; 2. To maximize the traction of all four wheels, gently press the accelerator with your right foot. Sudden acceleration will only cause the wheels to spin violently and lose traction.
17
5
Share

What are the effects of a faulty car carbon canister?

Car carbon canister failure affects the vehicle's emissions. The function of the car carbon canister solenoid valve is to reduce air pollution caused by fuel evaporation emissions while improving fuel efficiency. When the car starts, the solenoid valve opens, releasing the adsorbed fuel vapor into the intake manifold to enter the engine for combustion. Solutions for a damaged carbon canister solenoid valve include: 1. Cleaning the fuel tank exhaust system; 2. Cleaning or replacing the carbon canister solenoid valve. The working principle of the carbon canister solenoid valve is to control the purging effect of the carbon canister through the modulation of electrical pulse width. The ECU computer, based on different engine operating conditions, grounds the solenoid valve circuit at a certain frequency to turn it on or off. The ECU computer controls the vacuum of the purging carbon canister by operating the normally closed solenoid valve.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.