How to Use the One-Touch Power Window Feature in Volkswagen Tharu?

What is the vehicle positioning of the BJ80?

BJ80 is a mid-to-large-sized SUV with strong off-road capabilities. Below is relevant information: 1. The BJ80 is equipped with a 2.3-liter turbocharged engine across all models, delivering 231 horsepower and a maximum torque of 345 Nm. This engine features multi-point fuel injection technology and utilizes an aluminum cylinder head with a cast iron cylinder block. It is paired with a 6-speed automatic transmission. 2. The BJ80 employs a double-wishbone coil spring independent suspension at the front and a five-link coil spring non-independent suspension at the rear. It comes with a part-time four-wheel-drive system, which is standard for rugged off-road vehicles. The part-time four-wheel-drive system offers three driving modes: high-speed four-wheel-drive mode, low-speed four-wheel-drive mode, and high-speed two-wheel-drive mode.

11

2

Share

Is the Leiling Electronic Parking Brake Automatic?

Leiling's electronic parking brake activates automatically. When the electronic parking brake is in operation, no manual intervention is required. Simply ensure the vehicle comes to a complete stop, shift into the P (Park) position, and the electronic parking brake will automatically engage. After shifting to P, you can directly exit and lock the vehicle. Key details are as follows: 1. The electronic parking brake employs an integrated caliper design, combining the motor sensor with the brake caliper for electronic control. Traditional parking brakes rely on hydraulic braking with cable mechanisms. While the electronic parking brake's structure is more complex, its operation is remarkably user-friendly. 2. Its advantages include high technological sophistication, giving a premium appearance. Vehicles equipped with electronic parking brakes typically feature an auto-hold system. This function proves exceptionally practical by preventing vehicle rollback during brief stops. The most noticeable improvements are the electronic parking brake's sleeker aesthetics and easier maintenance compared to conventional systems.

19

3

Share

How early can you go for a vehicle inspection?

Vehicle annual inspections can be conducted up to three months before the expiration date indicated on the driving license. It is advisable to go for the inspection two months or slightly more than one month in advance, rather than waiting until just a few days before the inspection deadline. Additionally, before the 10th of each month, inspection stations tend to have relatively lighter workloads, making it an ideal time to avoid queues. The number of vehicles starts to increase from the middle of the month, and the latter part of the month is the peak period. Below is an introduction to the inspection schedules for various types of vehicles: 1. Operational passenger vehicles must be inspected once a year within the first five years; after five years, every six months. 2. Trucks and large or medium-sized non-operational passenger vehicles must be inspected once a year within the first ten years; after ten years, every six months. 3. Small and mini non-operational passenger vehicles must be inspected once every two years within the first six years; after six years, once a year; after fifteen years, every six months.

19

3

Share

What Causes the Squeaking Noise When the Car Air Conditioner is Turned On?

When the car air conditioner is turned on and a squeaking noise occurs, the reasons may include a loose or slipping air conditioner belt, a faulty compressor, or foreign objects in the blower and air ducts. Solutions for the squeaking noise when the air conditioner is on: 1. Clean the air conditioner belt: If the air conditioner pulley and belt slip, a sharp friction noise will be produced during the slipping process. Check if there is oil or dirt on the belt. If the belt is slipping due to oil or dirt, clean it thoroughly. If not, adjust the compressor's position bolts to tighten the belt, which can increase friction. 2. Tighten the belt: If the noise is caused by a loose belt, you can press the belt to check its tension. If it is too loose, tighten it. If the belt has been used for too long, it needs to be replaced. 3. Replace the tensioner pulley: If the belt tensioner pulley is damaged, it can also cause noise and needs to be replaced with a new one. 5. Clean the blower: Foreign objects in the blower and air ducts can also cause noise, so the blower and air ducts need to be cleaned.

20

1

Share

Can You Still Drive When the HOLD Light Is On?

It is not recommended to continue driving when the HOLD light is on. The illumination of the HOLD light indicates a transmission fault, often due to an unresponsive gear switch, though damage to the solenoid valve cannot be ruled out. The HOLD button adjusts the optimal driving state based on different driving conditions, effectively preventing the transmission from frequently shifting on poor road surfaces and serving as a forced downshift (without upshifting) during overtaking. More details are as follows: 1. Pressing the HOLD button in D gear keeps the transmission in 2nd, 3rd, and 4th gears (primarily 4th gear), while pressing it in 3rd gear keeps it in 2nd and 3rd gears (primarily 3rd gear), and pressing it in 2nd gear keeps it fixed in 1st gear. Using this key will not damage the transmission. 2. Generally, if the HOLD light comes on, first check the transmission for faults or damage, then inspect the gear position, and finally examine the solenoid valve for a step-by-step diagnosis.

17

2

Share

What brand of tire is Opals?

Opals is the English name for Baoshi tires, a product of Shandong Fangxing Rubber Co., Ltd. Here is some relevant information: 1. Other details about Baoshi tires: The core personnel and engineers of the company mostly come from Michelin, and later recruited excellent R&D personnel from Continental, Hankook, and Bridgestone. In the view of tire industry insiders, it basically represents the first-tier design and R&D level in China, with one-step mixing technology currently in a leading position. 2. Precautions for selecting tires: (1) When choosing tires, you need to know the size of your car's rims. If you buy the wrong size, it will be a waste. (2) Secondly, choose tires with a low aspect ratio. The lower the aspect ratio, the better the comfort, and vice versa. (3) Additionally, determine the width of the tread. The larger the tread, the higher the driving stability and the better the grip. (4) It is recommended to choose tire brands with a good reputation. The more people use them, the higher the credibility of the brand.

1

3

Share

How to Use the One-Touch Power Window Feature in Volkswagen Tharu?

What is the vehicle positioning of the BJ80?

Is the Leiling Electronic Parking Brake Automatic?

How early can you go for a vehicle inspection?

What Causes the Squeaking Noise When the Car Air Conditioner is Turned On?

Can You Still Drive When the HOLD Light Is On?

What brand of tire is Opals?

What are the differences between Dongfeng Honda and Guangzhou Honda?

Which engine oil is suitable for Hyundai ix35?

What Causes the ABS Light to Illuminate in Volkswagen Tiguan?

Where is the one-button start switch for Audi cars?