How to use the Mercedes-Benz individual mode?

Does the Audi A4L Burn Engine Oil?

The Audi A4L does experience engine oil burning, which is a common issue with this model. However, oil burning typically occurs only after the engine has worn to a certain extent from use. Definition of Oil Burning: Oil burning refers to a condition where the cumulative engine oil consumption exceeds 0.3 liters per 1,000 kilometers driven. With proper vehicle maintenance, oil burning issues usually don't appear until after approximately 100,000 kilometers of operation. Solutions for Oil Burning: One temporary solution is to use higher viscosity engine oil to improve the sealing between pistons and cylinder walls. However, the ultimate solution requires a thorough vehicle inspection and repair to fundamentally address the issue.

8

0

Share

What is the correct usage of one-button start/stop?

The following is the correct usage of one-button start/stop: 1. First, press the brake pedal to bring the vehicle to a smooth stop. 2. Then shift the gear from D (Drive) to N (Neutral) and engage the parking brake. 3. Next, release the foot brake but do not turn off the power (this is to confirm that the vehicle is completely stationary under the parking brake's effect, preventing P (Park) gear lock-up). 4. Finally, continue pressing the foot brake, shift the gear from N to P, release the foot brake, press the one-button start/stop button to turn off the power, and complete the engine shutdown. Additional information: 1. The one-button start/stop device is part of a smart car system, serving as a button mechanism to simplify the starting process and also enabling engine shutdown. This device can be retrofitted either at the original key lock position or as an independent panel. 2. In case of an emergency while driving, the engine can be shut off by pressing and holding the one-button start/stop button for more than 3 seconds or pressing it three times consecutively. At this point, the power will switch to ACC (Accessory) mode.

6

4

Share

What is the problem with abnormal noise from the right rear wheel when turning?

Turning noise is the sound emitted when the steering resistance pump reaches its limit. If abnormal noises come from the chassis while the car is moving, it is necessary to go to a 4S shop for inspection and correction. The following are the causes of abnormal noise: 1. When car tires come into contact with the ground, they produce various noises of different intensities due to the type or unevenness of the road, the speed of the car, the type of tires, and the air pressure of the tires themselves. First, check whether the tire screws are tightened to eliminate the symptoms of abnormal noise. 2. When the hub screws are loose, the wheels will make slight knocking noises when lightly braking downhill. If the rear wheel screws are loose, the noise from the wheels will be amplified through the trunk and may be mistaken for sounds coming from items placed in the rear box. When the hub screws are severely loose, the wheels will wobble while moving, and a more obvious clicking sound can be heard at low speeds. In this case, the car should be stopped immediately to check the hub screws.

14

1

Share

How many color options are available for the Civic 2019?

The 2019 Honda Civic offers six body color options: Phoenix Yellow, Lunar Silver Metallic, Aegean Blue Metallic, Rallye Red, Sonic Gray Pearl, and Crystal Black Pearl. Here are some relevant details: 1. The Honda Civic (CIVIC) is available in multiple models, including three-door hatchback, hardtop coupe, hybrid version, and five-door sedan. The Honda Civic launched in the Chinese market shares the same production platform with Dongfeng Honda's existing model, the CR-V, with both vehicles using the same chassis. 2. The 2019 Civic continues to use the existing 1.0T and 1.5T powertrains, still differentiated by the 180TURBO designation. The lineup consists of eight models, ranging from the base 180TURBO Shangyue, Shangdong, and Shangqing versions to the 220TURBO Jinkong, Jindong, Randong, Jinqing, and Ranqing versions. The interior offers three color schemes: black, beige, and brown. The 220TURBO Randong and Ranqing versions additionally feature black sport trim, a rear spoiler, and center exhaust.

13

2

Share

Which technology is used in autonomous driving?

Autonomous driving itself is a technology, which is divided into several levels, each with different principles and technologies employed. Autonomous driving requires four steps to complete: information collection, analysis and recognition, action decision-making, and device control. Below is a detailed description: 1. The autonomous driving system utilizes advanced communication, computer, network, and control technologies to achieve real-time and continuous control over trains. By employing modern communication methods, it directly interfaces with the train, enabling bidirectional data communication between the train and the ground. This ensures fast transmission rates and large data volumes, allowing subsequent tracking trains and control centers to promptly obtain the exact position of the preceding train. This makes operational management more flexible, control more effective, and better suited to the requirements of train autonomous driving. 2. The main functions of the autonomous driving system are bidirectional information transmission between the ground and the train, as well as comprehensive and emergency handling of operational organization. The ground-train information transmission channel is a crucial component of the automatic train operation control system. The onboard equipment of the automatic control system relies entirely on operational control commands received from the ground control center to operate the train. It continuously monitors the train's actual speed and the ground's permitted speed commands. If the train speed exceeds the ground's operational speed limit, the onboard equipment will implement braking to ensure the train's operational safety.

11

1

Share

Is the failure rate of Audi A4 very high?

Audi A4 has a high failure rate. The following are common failures of Audi A4: Oil leakage from the camshaft oil seal: This is caused by the material of the oil seal itself. The oil seal material of Audi A4 is made of rubber, and prolonged high-speed driving under high temperatures can cause the oil seal to age, leading to oil leakage. If the owner encounters a similar phenomenon, simply replacing the oil seal will suffice. Abnormal noise from the fuel pump: After replacing the gasoline filter, Audi A4 may sometimes experience symptoms such as lack of acceleration power and failure to start. Over time, the fuel pump may also produce abnormal noises. This is caused by insufficient air pressure due to a clogged cutoff valve. The solution is to replace the fuel pump. The fuel pump has a two-year warranty period, during which the maintenance personnel at the 4S store will apply to the manufacturer for a free replacement.

6

5

Share

How to use the Mercedes-Benz individual mode?

Does the Audi A4L Burn Engine Oil?

What is the correct usage of one-button start/stop?

What is the problem with abnormal noise from the right rear wheel when turning?

How many color options are available for the Civic 2019?

Which technology is used in autonomous driving?

Is the failure rate of Audi A4 very high?

Methods for Controlling Automotive Exhaust Emissions

What Causes the Coolant Temperature Light to Illuminate During Cold Starts?

What are the body dimensions of the Haval M6?

At what speed does turbocharging kick in?