How to Use the Mazda Atenza Headlight Cleaning Function?
4 Answers
The usage method of the Mazda Atenza headlight cleaning function mainly consists of the following steps: 1. First, start the ignition switch of the Mazda Atenza. 2. Turn on the headlights, noting that this function is only available when the headlights are on. 3. The headlight cleaning function can then be used. The headlight cleaning device is primarily used in vehicles equipped with xenon lights. This is because xenon lights offer advantages such as energy efficiency, high brightness, high color temperature comfort, and long lifespan. However, they also have a drawback: the higher color temperature results in poorer penetration in rainy, foggy, or snowy weather compared to halogen lights. If dust and dirt accumulate on the headlight cover, the penetration becomes even worse, and some of the light source is absorbed. Additionally, dust particles can scatter the light source, making the headlight cleaning device necessary in such situations.
When I used to drive the Mazda6 (Atenza), I frequently used its headlight cleaning feature, which was super easy to operate. Typically, you first turn on the headlights—like at night or in foggy conditions when they must be illuminated. Then, simply pull the windshield wiper control stalk next to the steering wheel—just like spraying windshield washer fluid—toward yourself or press it, and the small nozzles under the headlights will spray cleaning fluid to wash off mud or dust from the lens. I usually use it during rain, snow, or when driving on dirt roads to keep the lights brighter and safer. Make sure the reservoir has dedicated cleaning fluid or a water mixture—don’t spray it empty, as it could damage the nozzles. Avoid frequent use in daily driving to prevent wasting water and potential wear. If it doesn’t work, check the fuse or whether the nozzles are clogged. Overall, this feature is thoughtfully designed—just a quick pull gets the job done, ensuring clear visibility is what matters most.
With more driving experience, I find the headlight cleaning system on the Mazda6 Atenza very intuitive to use. When your headlights are on, simply pull the wiper stalk toward you (similar to the windshield washer action), and the system will automatically activate the headlight washer jets. I personally use it frequently during long nighttime drives to maintain brightness, and the effect is quite good. Don't use it daily though - only when the lights are dirty, otherwise it wastes water and causes component wear. Always ensure the washer fluid reservoir is filled. If there's no response, it might be an electrical issue or nozzle malfunction - just do a quick check. Clear lighting is essential for safe driving, and this feature is both practical and hassle-free. Proper maintenance extends its lifespan.
When I usually drive the Mazda6, using the headlight washer is quite simple. Make sure the headlights are on, then pull the wiper stalk a few times or press the relevant button, and the washer will activate to clean the lights. It's especially useful after rain, washing away dirt to restore the brightness of the lights. Remember to operate gently, avoid excessive use, and check the washer fluid reservoir monthly. If the cleaning isn't effective, try changing the cleaning solution. Safety first—clear lights ensure stable driving.
