How to Use the Low Beam Lights on the Lavida?
2 Answers
To turn on the low beam lights of the Lavida, follow these steps: 1. Rotate the knob on the lighting switch assembly located on the left side of the steering wheel to activate the low beam lights. 2. To switch between low and high beams, pull the light control lever backward and upward. Inside the cabin, you can find the light adjustment lever on the left back of the steering wheel and the left side of the center console. By default, the lever is set to the low beam position. The primary uses of low and high beams are: 1. When driving outside urban areas at night, they help alert oncoming vehicles to stay in their lane and avoid occupying the wrong lane. 2. They serve as a signal to the vehicle ahead when preparing to overtake.
Using the low beam on the Lavida is quite intuitive. I usually turn it on at dusk or night to illuminate the road. The operation is simple: after sitting in the driver's seat, locate the control lever on the left side of the steering wheel, which is typically multifunctional. Rotate the knob to the middle position, indicated by a symbol resembling a light bulb with a small angle—that's the low beam. If the car is equipped with automatic lighting, the system might switch to low beam after starting the engine, but I prefer manual control for safety. Remember to turn it on when light is insufficient, and always check if the lights are actually on to ensure clear visibility ahead without dazzling other vehicles. In case of issues, like a bulb failure, you can refer to the owner's manual or visit a repair shop. I once had to replace a bulb myself, which only took a few minutes. With ten years of driving experience, I’ve learned that good habits prevent many troubles. Now, I always turn on the low beam after work, maintaining smooth driving—it’s a great experience.
