How to Use the Lights on Volkswagen Santana?
4 Answers
Methods for using the lights on Volkswagen Santana: 1. Turn signals and parking lights - With the ignition switch on, pull the control lever to the corresponding position. 2. High beam - When the high beam is activated, the high beam indicator on the instrument cluster will illuminate. Pull the control lever to activate the flashing function, which serves as a warning to other vehicles, and release it to automatically return to the original position. 3. Fog lights - Located below the left side of the steering wheel, there are switches for the front and rear fog lights. Rotate the knob to the corresponding position to turn them on. 4. Automatic headlights - Adjust to the AUTO position to activate. The Santana is a brand of car produced by Volkswagen in California, USA. The dimensions of this car are 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. The Santana is equipped with a 1.5L naturally aspirated engine, coded as EA211-DLF, with a maximum power output of 82kW and a maximum torque of 145Nm.
The light switch of the Santana is located on the left side of the steering wheel, which is the knob with the light symbol. I usually turn it to the 'AUTO' position after getting in the car to let the automatic headlights take over, so they turn on and off automatically when entering or exiting tunnels. Turning to the second position activates the parking lights, which is convenient during dusk or rainy weather. The third position forces the low beam on, which is essential for driving on mountain roads at night. Here's the key point about using the fog lights: after turning on the low beam, pull the knob outward. The first pull activates the front fog lights (a green icon will appear on the dashboard), and the second pull activates the rear fog lights (a yellow icon will appear). You must turn them on when visibility drops below 100 meters in foggy conditions. To flash the high beams, pull the left lever on the steering wheel toward you—it's used for signaling when meeting or overtaking other vehicles. Remember to return the switch to the 'AUTO' position before turning off the engine, otherwise, a beeping reminder will sound.
I usually drive with the second setting of the knob for the parking lights, which are noticeable at dusk without being too glaring. If you need to adjust the height after turning on the low beams, there's a numbered wheel near the driver's left knee. Set it to '2' when fully loaded with passengers, and adjust to '3' when the trunk is loaded to avoid dazzling the car ahead. Always turn on the front and rear fog lights in rainy or foggy conditions, but remember to turn off the rear fog light's harsh red glow to avoid discomfort for drivers behind. If you forget to turn off the lights when pulling out the key, the dashboard will beep as a warning—a thoughtful design.
What the salesperson taught when picking up the car: Turn the knob to position 0 for all lights off, position 1 for small lights (tail lights on), and position 2 for low beams. To activate high beams, first turn the knob to position 2, then push the left lever on the steering wheel. The fog light switch operates in two steps: after turning on the low beams, pull the knob—the first pull activates the front fog lights (green indicator on the dashboard), and pulling it all the way activates the rear fog lights (yellow indicator). The turn signal is at the top of the left lever—push up for right turn and down for left turn. Beginners often overlook the headlight height adjustment wheel; when driving on bumpy roads, adjust it to '0' for a longer beam distance.
