How to Use the Lexus Air Conditioning?

2 Answers
StJanelle
07/25/25 12:22pm
Simply adjust the temperature higher and then set the appropriate fan speed. First, press the AC button, then lower the temperature, and finally select the suitable fan speed. The principle of car air conditioning is very simple. When cooling, after pressing the AC button, the compressor clutch will engage, and the engine will drive the compressor to operate.
Was this review help?
3
5
Share
VonBrianna
08/11/25 8:20pm
When driving my Lexus, I find the air conditioning controls quite intuitive. After starting the car, simply press the AUTO button on the center console, and the system automatically adjusts the fan speed and temperature based on the cabin temperature. If you want to change the temperature, just turn the knob to the desired setting, like around 25°C in winter. The fan speed can be manually increased or decreased, and there's also a recirculation button—use outside air circulation for ventilation in city traffic jams, and switch to inside air circulation with windows closed on highways to maintain fresh air. I prefer adjusting the AC at red lights to avoid driving distractions and regularly clean the filters to prevent odors. Lexus's comfort mode ensures even temperature distribution without blowing directly at the head, making long drives less fatiguing. Safe driving is always the top priority.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

Can a Car Change Color by Applying Film?

It is possible to change a car's color by applying film. However, without approval from the traffic department, a full-body color change may be considered illegal. Currently, full-body color changes are permitted but require registration and filing. With increasingly relaxed modification policies, if the color change via film exceeds 30% of the vehicle's surface, it must be reported to the vehicle management office to update the vehicle registration certificate. Below are the steps for filing a color change via film: 1. If the original vehicle has any outstanding violations, they must be resolved before proceeding. The applicant must then bring the original and photocopy of the vehicle owner's identity proof, the vehicle registration certificate, and the vehicle license to the vehicle management office to fill out the 'Motor Vehicle Change Registration Application Form' and submit the application. If approved, the applicant will receive a 'Notice of Approval for Change,' allowing the color change. Note that the new color and patterns must not imitate emergency vehicles such as police cars or fire trucks, and the vehicle color must not exceed three variations. 2. After the color change, the vehicle owner or agent must drive the modified vehicle to the vehicle management office with the required documents and invoice to complete the inspection process. The office staff will record the new color, take new photos, and update the registration details.
3
5
Share

How to File an Insurance Claim After Hitting Your Own Car?

Here are the steps for filing an insurance claim after hitting your own car: 1. Report the incident: Bring your insurance policy, vehicle registration, and driver's license to the insurance company in your own car. 2. Fill out the 'Vehicle Accident Registration Form' and 'Accident Notification Form' at the claims department. 3. Damage assessment: Take the 'Vehicle Accident Registration Form' to the claims department's assessor to determine repair items and costs. After assessment, you will receive a 'Damage Assessment Form'. Do not omit any repair items; repair costs should not be set too low. 4. Vehicle repair: Submit the 'Damage Assessment Form' to the repair shop. The shop will repair the vehicle according to the form and provide you with a 'Vehicle Pickup Slip' as proof. 5. After repairs, pay the repair fee with the 'Vehicle Pickup Slip' to retrieve your car, and request the following documents from the repair shop: 'Repair Invoice', 'Repair Order', 'Work Order', and 'Material List' (all must bear the repair shop's official seal). 6. Submit documents: Provide the 'Accident Notification Form', 'Damage Assessment Form', 'Repair Invoice', 'Repair Order', 'Material List', 'Work Order', and 'Claim Settlement Form' to the insurance company's claims department. 7. Claim approval: Normally, insurance companies will reimburse all reasonable rescue expenses. For towing services, standard vehicles are typically covered for one tow regardless of the number of tows, with only one reimbursement provided. Just submit the invoice for reimbursement.
17
2
Share

How to Use the One-Button Start in a Car?

First, press the start button once to turn on the ACC light, then press the start button again. At this point, the one-button start will turn green, and the vehicle will begin self-checking. After the self-check is completed, press the brake and press the one-button start once more to start the vehicle. Below are some precautions regarding the one-button start: 1. Turning off the engine while driving: In case of an emergency while driving, you can turn off the engine by pressing the engine start/stop button for more than 3 seconds or pressing it three times consecutively. The power will then switch to ACC mode. 2. Restarting the engine while driving: If the engine stalls while driving, you can restart it without pressing the brake pedal by shifting the gear lever to N (neutral) and pressing the engine start/stop button. 3. Low battery or malfunctioning smart key: Replace the battery promptly. If you need to use the vehicle, you can open the door with the mechanical key and insert the smart key into the smart key cylinder to start the engine. 4. Steering wheel lock: When the engine start/stop button is in OFF mode, the steering wheel locks for anti-theft purposes. The steering wheel will also lock automatically when the door is opened or the smart key is removed from the cylinder. Normally, the steering wheel unlocks automatically when the engine start/stop button is in ACC mode. If the steering wheel does not unlock, you can release the tension by turning the steering wheel left or right while pressing the engine start/stop button. 5. Starting the engine under special circumstances: If the brake light fuse is blown, the engine usually cannot be started. In this case, you can hold the engine start/stop button for 10 seconds in ACC mode to start the engine.
7
4
Share

Is it still necessary to display the compulsory traffic insurance decal on vehicles?

It depends. If electronic insurance policies have been implemented locally, there is no need to display the compulsory traffic insurance decal on the vehicle. If electronic policies have not yet been adopted in the area, the compulsory traffic insurance decal must be displayed. For regions where electronic policies have not been promoted, if a vehicle is driven without displaying the compulsory traffic insurance decal, the vehicle may be impounded if caught. Additionally, the owner may face fines and warnings. The vehicle owner must provide the necessary documents and proof of compulsory traffic insurance to retrieve the vehicle. According to Article 95 of the Road Traffic Safety Law: If a motor vehicle driven on the road does not display the inspection compliance mark or insurance mark, or if the driver fails to carry the vehicle license or driving license, the traffic management department of the public security organ shall detain the vehicle, notify the party to provide the corresponding license, mark, or complete the required procedures, and may impose penalties in accordance with the provisions of Article 90 (a warning or a fine of not less than 20 yuan but not more than 200 yuan). Compulsory Traffic Insurance for Vehicles: The full name of compulsory traffic insurance is "Compulsory Liability Insurance for Motor Vehicle Traffic Accidents." It is a mandatory liability insurance where the insurance company compensates for personal injury, death, and property losses of victims (excluding vehicle occupants and the insured) caused by road traffic accidents within the liability limits. Premiums are based on nationally unified standards. However, the price of compulsory traffic insurance varies depending on the vehicle type, primarily influenced by the number of seats. Compared to the more than 20 exemption clauses in commercial third-party liability insurance, compulsory traffic insurance covers a much broader range, including losses caused intentionally by the victim, the insured's own property losses, related arbitration and litigation costs, and certain indirect losses from accidents. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory traffic insurance will provide compensation within the liability limits. Introduction to Electronic Insurance Policies: An electronic insurance policy refers to a digital policy issued by an insurance company with an electronic signature, using digital signature software and enterprise digital certificates compliant with the PKI system. An insurance policy, abbreviated as a policy, is the formal written proof of an insurance contract between the insurer and the insured. It must fully record the rights, obligations, and responsibilities of both parties. The content of the policy serves as the basis for both parties to fulfill the contract. The insurance policy is proof of the establishment of the insurance contract. Advantages of Electronic Insurance Policies: Saves paper resources, eliminating the need to print insurance proof decals; Time-saving and convenient, unrestricted by time or location, with information accessible online anytime, fast and efficient; Allows for reissuance and resending, eliminating concerns about loss—paper versions can also be printed or mailed if needed offline; Simplified management—electronic standardization makes it easier for insurance companies and traffic police departments to manage vehicle insurance information.
3
3
Share

What to Do When Honda Accord Bluetooth Won't Connect?

First, open your phone and locate the settings on the home screen, then navigate to the Bluetooth option. After your phone detects the relevant Bluetooth device model, click to connect. Select to turn on Bluetooth, which will then search for nearby Bluetooth devices. Start the car and enable the car's Bluetooth function. After turning on the phone's Bluetooth switch, the phone will search for nearby Bluetooth devices. Once detected, click to connect, then proceed with pairing by entering the pairing password (0000 or 1234) to complete the connection.
2
4
Share

What to Do When Car Lights Are Scratched?

If the headlight is not broken, there usually won't be many scratches left. In this case, simply wipe it a few times. For headlights made of special plastic materials, you can use specialized sandpaper for wiping or clean them with a towel. If there are only minor scratches, you can purchase a specialized scratch removal kit online, then sand the area with sandpaper and proceed with painting.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.