How to Use the Lavida's Air Conditioning?

2 Answers
Tammy
07/29/25 7:59am
The operation method of Lavida's air conditioning is: 1. Start the engine; 2. After the idle speed stabilizes, turn the fan speed knob; 3. Rotate the temperature mode knob to select the desired temperature; 4. Press the AC switch to activate the compressor. The Lavida's body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, and fuel tank capacity 51L. The Lavida Comfort version is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 150hp, maximum power of 110kW, and maximum power speed of 5000rpm.
Was this review help?
7
2
Share
BeauLynn
08/12/25 11:14am
The air conditioning in the Lavida is super convenient. When I start the engine, I just press the AUTO button on the center console, and it automatically adjusts the airflow and cooling/heating effect based on the cabin temperature. Turning the temperature knob to around 22 degrees is the most comfortable, and the system automatically controls the fan speed. The manual fan speed buttons allow me to increase or decrease the airflow—if it feels too strong, I just turn it down. I often use the center screen to switch between recirculation and fresh air modes. On the highway, I use fresh air mode to keep the air flowing and fresh, while in traffic jams, I switch to recirculation to avoid inhaling exhaust fumes. Regular maintenance is crucial—I change the cabin air filter once a year and clean the vents before summer to prevent odors. A dirty filter affects airflow quality. In winter, I wait a few minutes for the engine to warm up before using AUTO for more even heating. Overall, it’s worry-free and smart, perfect for daily commuting.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Which has a higher safety factor, sedans or SUVs?

Sedans have a higher safety factor. Here are the specific reasons why sedans have a higher safety factor: 1. SUVs have better visibility than sedans. They provide a better grasp of road conditions, allowing drivers to adjust the throttle and brakes in advance based on the road situation. Sedans, due to more obstructed visibility, have a more limited judgment of road conditions. 2. During oncoming traffic, sedans tend to yield more actively. On non-marked road sections with two lanes, sedans usually move to the side to give way to SUVs or off-road vehicles due to their larger size and the subjective judgment made by drivers. When driving a sedan, the initiative of oncoming vehicles is noticeably reduced. 3. SUVs are less agile than sedans. SUVs are less stable on mountain roads compared to sedans, and in terms of handling on mountain roads, SUVs do not perform as well as sedans.
3
1
Share

What does it mean when the engine exhaust system warning light comes on?

Solutions for when the engine exhaust system warning light comes on are as follows: 1. Start and turn off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, and then reconnect it. After performing the above steps, check if the engine warning light on the dashboard is still on. This method only applies to false engine faults. 2. The engine exhaust system warning light often comes on due to damage to the oxygen sensor in the three-way catalytic system or poisoning of the catalytic converter caused by poor fuel quality in the country. If the light comes on while driving, immediately reduce speed and drive to the nearest service station for inspection. 3. If the vehicle cannot start after the warning light comes on, this is usually due to a malfunction in the fuel pump or ignition system, and a tow truck should be called directly.
20
5
Share

How long does it take to get a driver's license after passing the fourth subject test?

You can receive your driver's license within a week or about ten days after passing the fourth subject test, though the exact time may vary depending on the region. Below are the specific details about obtaining the driver's license: 1. After passing the fourth subject test, you must undergo at least thirty minutes of traffic safety and civilized driving education, as well as case studies of traffic accidents, and participate in a license-receiving oath ceremony before the vehicle management office issues the driver's license. 2. The methods of receiving the license include obtaining it on the spot after the test, having it mailed to you, picking it up at the driving school, or collecting it at the vehicle management office. 3. If you are applying to add a permitted driving category, your original driver's license must be surrendered.
12
3
Share

How to Turn on the Heating in the 10th Generation Accord?

Here are the steps to turn on the heating in the 10th Generation Accord: 1. First, locate the air conditioning control area of the Accord, which is positioned in the center of the vehicle's dashboard. 2. The "A/C" button is the cooling switch for the air conditioning, while the "AUTO" button activates the automatic air conditioning function. Press the "AUTO" button and adjust the temperature to a higher setting to allow the vehicle to emit warm air. (The "SYNC" button controls the dual-zone temperature. The two knobs on either side are for adjusting the temperature up or down. The middle knob adjusts the air flow volume.) 3. The "MODE" button adjusts the direction of the air vents. 4. Finally, the "FRONT" button controls the front windshield defogging, and the "REAR" button controls the rear window heating.
17
4
Share

How to Drive to Get License Plates When the Temporary License Has Expired?

Here are the steps to re-register a vehicle with an expired temporary license: 1. First, you need to pay the vehicle purchase tax, select commercial insurance for the car, and undergo a criminal investigation inspection of the vehicle. Note that you must pay the vehicle and vessel tax before paying the purchase tax. Required documents include a copy of your ID card, a copy of the vehicle qualification certificate, the tax declaration form, and the tax invoice. 2. Go to the inspection station to complete the formalities: Non-exempt vehicles need to undergo an inspection, then pay the fees, fill out forms, take photos, submit documents, and collect the license plate application materials. 3. Take a number at the service hall and wait to process the relevant procedures. At this stage, you need to choose a license plate number. If you have already selected a number online, you must print out the online selection form. 4. Install the electronic license plate using the acceptance receipt, pay the road and bridge fees and processing fees at the payment hall, and collect the card at the road and bridge center. After collecting the card, use the acceptance receipt to pick up the license plate and documents at the service hall (usually takes about 1 business day).
19
0
Share

What does the eco light on the car dashboard mean?

The appearance of eco on the dashboard indicates that the vehicle's economy mode has been activated. Eco is an English abbreviation, derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). Eco mode is further divided into active eco driving mode and non-active eco driving mode. The difference lies in the fact that the active mode has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light will illuminate, and the vehicle will automatically begin adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button; when the dashboard eco indicator light comes on, it serves merely as a reminder function. The eco system will automatically assess your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most vehicles employ the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the eco mode. However, it is unnecessary to enable eco mode when driving at speeds exceeding 120 km/h, during idling, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of eco mode but could also impair the vehicle's power performance. Additionally, the eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the eco mode to automatically deactivate. During idling or when in N/P gear or manual mode, the eco mode may also become ineffective. When high torque output is required, such as during hill climbing, the engine control unit will prioritize ensuring sufficient power to drive the vehicle, and the eco mode will not function in such scenarios.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.