How to Use the L Gear in the 2018 Envision?
2 Answers
L gear refers to the low gear mode of the transmission. In this gear, the transmission will remain in 1st gear without upshifting, which can be used in situations such as slopes and also provides some braking function when going downhill. The specific usage methods are as follows: 1. When shifting from D gear to L gear, if the current speed is higher than the speed required for 1st gear, it will automatically shift to the corresponding gear. 2. If shifting to L gear at low speed, it may be L1 gear. If you need to increase the gear at this time, you can press the plus button on the left side of the gear lever to shift up to the desired gear. Similarly, if the gear is too high, press the minus button to lower it to the corresponding gear. 3. When climbing steep slopes or driving on snow, switching to L gear can improve the vehicle's climbing and passing ability. 4. When going downhill for a long time, switching to a lower gear in L gear can limit the speed through engine braking, reducing the safety risks caused by frequently stepping on the brakes in D gear.
Oh, using the L gear in a 2018 Enclave is actually quite practical. I often use it on steep descents. The car has an automatic transmission—when driving on mountain roads, simply shift to L gear, and the engine will help slow the vehicle down, reducing brake wear. Avoid shifting at high speeds normally; it’s best to reduce speed to below 30 km/h before switching to prevent transmission damage. The gear lever is right in the middle—just pull it back from the D position to select L gear. If you’re towing or driving in rain or snow, this gear provides better control and stability when climbing. Remember, prolonged use at high speeds can increase fuel consumption, so shift back to D gear when going downhill. Safety first—always check the dashboard display before shifting gears.
