How to Use the Internet Connectivity in Roewe i5?

What is the Highlander?

Highlander is a large SUV under Toyota. Here are some details about the Highlander: 1. Background: The Highlander was introduced in 2000 as Toyota's attempt at a unibody SUV. It entered the Chinese market in 2007 and achieved localization in 2009. 2. Market Positioning: Large luxury SUV. 3. Powertrain: It no longer uses the previous generation's large-displacement naturally aspirated engine, instead adopting a 2.0T engine. This reduces fuel consumption while maintaining ample power, and the 6-speed automatic transmission occasionally provides a sense of driving pleasure. The Highlander comes in both two-wheel drive and four-wheel drive versions, with multiple driving modes to choose from, truly embodying the qualities expected of an SUV. 4. Interior: The Highlander avoids exaggerated lines. The substantial feel of the steering wheel and dashboard conveys a sense of stability, while abundant features highlight its luxury. In terms of space, the Highlander also ranks first among its peers.

1

Share

What does Audi 40tfsi mean?

Audi 40tfsi refers to the displacement identifier of this vehicle. Below is more information about Audi 40tfsi: 1. The term '40TFSI' as a whole represents the acceleration G-value of the vehicle, with a higher number indicating faster acceleration. Therefore, the badge on the rear of an Audi does not indicate displacement but rather the vehicle's acceleration capability. 2. The '40tfsi' designation signifies that Audi's models in the Chinese market have adjusted their displacement identifiers, shifting from the previous naming convention based on displacement (such as 1.8T, 2.0T, 2.4, etc.) to a numerical naming system derived from the G-value calculated from 0-100 km/h acceleration. 3. The meaning of '40TFSI' is that the Audi tail badge represents the acceleration G-value. '40TFSI' is the speed G-value, and Audi now uses G-values to convey the overall speed sensation of the model, downplaying the awareness of displacement.

11

2

Share

How to Turn on the Heated Rearview Mirror in Emgrand GL?

Press the rear windshield defrost button on the air conditioning control panel to activate the exterior rearview mirror and rear window defogger, with the indicator light illuminating. The exterior rearview mirror and rear window defogger will automatically turn off after approximately 12 minutes. Below is an introduction to the heated rearview mirror function: 1. The heated rearview mirror function refers to the ability of the rearview mirror to be heated by electric heating wires embedded behind the mirror surface when driving in rainy, snowy, or foggy weather, ensuring a clear mirror surface. 2. The working principle of the electrically heated rearview mirror is very simple and not highly costly. It involves installing an electric heating element (heating film) inside the mirror lenses of both rearview mirrors. In rainy or snowy weather, when the driver turns on the heated rearview mirror function, the heating element rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius, thereby heating the mirror surface to remove fog and frost.

9

0

Share

Why is the Car Windshield Washer Not Spraying Water?

Car windshield washers are tools we frequently use while driving. Common causes for washers not spraying water include: 1. Insufficient washer fluid level: Some vehicles will illuminate a dashboard warning light when washer fluid is low, reminding you to refill it. 2. Incorrect washer fluid selection: In cold weather, the fluid may freeze and crack the washer reservoir. Therefore, when choosing washer fluid, opt for an antifreeze-type solution. Select the appropriate antifreeze rating based on your local temperature. Currently available options include sub-zero washer fluids rated for -10°C or even -25°C. 3. Faulty washer pump: A malfunctioning washer pump can prevent water from spraying. 4. Clogged or damaged washer hoses/nozzles: Blockages or damage in the washer system's tubing or nozzles may also cause spray failure.

20

5

Share

How to Reset the Maintenance Reminder?

To reset the maintenance reminder, follow these steps: 1. First, turn off the car's ignition, then press and hold the 0.0/SET button on the right side of the dashboard with your left hand. 2. While holding the "SET" button, turn on the ignition. 3. Release the "SET" button, then press it once more. 4. Finally, turn off the ignition, then turn it back on to complete the reset of the maintenance reminder. Here are some precautions regarding car maintenance: 1. Engine maintenance. The car engine should be cleaned at appropriate intervals. Prolonged use can lead to the formation of a thick layer of carbon deposits on the engine's surface, which can significantly corrode the rubber components inside the engine. 2. Prevent evaporation of gasoline and water. During summer, temperatures are generally higher, making gasoline and water more prone to evaporation than usual. Therefore, it's essential to regularly check the radiator and fuel tank, topping them up promptly when levels are low.

8

3

Share

Do vehicles over 6 years old require annual inspections?

After the 6-year exemption period for motor vehicles, only 2 on-site inspections are required within 10 years, specifically in the 6th and 8th years. For private passenger vehicles over 10 years old, the original inspection cycle remains in effect: annual inspections for vehicles aged 10-15 years, and semi-annual inspections for vehicles over 15 years. Vehicle inspection cycle regulations: Operational passenger vehicles: Annual inspection for vehicles under 5 years old; Semi-annual inspection for vehicles over 5 years old; Trucks and large/medium non-operational passenger vehicles: Annual inspection for vehicles under 10 years old; Semi-annual inspection for vehicles over 10 years old; Small/mini non-operational passenger vehicles: Biennial inspection for vehicles under 6 years old (eligible vehicles only need to apply for inspection labels). Since November 20, 2020, 7-9 seat non-operational mini/micro buses (excluding vans) have been included in the exemption scope. Vehicle inspection procedures: Emission test: Queue up, pay at the fee window, and wait for testing. Preliminary checks include verifying engine numbers against registration certificates, basic visual inspection, and completing emission test forms. Violation check: Obtain and complete periodic inspection forms at the query window (present registration certificate). Staff will check for traffic violations. Any violations must be handled promptly. Deposit payment: Pay deposit at designated window, obtain receipt, and complete exterior inspection form. Exterior inspection: Submit form at inspection station. Verify documents and check third-party insurance validity. On-site testing: After passing exterior inspection, queue for comprehensive testing (brakes, headlights, chassis etc.). The 5-10 minute process generates a computerized report. Final review: Submit ID copy for final approval and stamp at main inspection office. Fee payment and label collection: Pay relevant fees at windows and retrieve deposit.

17

4

Share

How to Use the Internet Connectivity in Roewe i5?

What is the Highlander?

What does Audi 40tfsi mean?

How to Turn on the Heated Rearview Mirror in Emgrand GL?

Why is the Car Windshield Washer Not Spraying Water?

How to Reset the Maintenance Reminder?

Do vehicles over 6 years old require annual inspections?

What are the solutions for fault code p2138?

How to align the timing belt on a Ford Kuga?

Does Lexus Offer Free Maintenance?

How to Replace the Battery of Changan CS75 Car Key?