How to Use the High and Low Beam Lights on Wuling Hongguang Mini?

1 Answers
JourneyDella
07/28/25 9:27pm
On the left side of the steering wheel, there is a set of light combination switches. At night, rotating the switch one notch turns on the low beam, and rotating it another notch turns on the high beam. Turn on the low beam when driving on roads with streetlights at night, and pay special attention to using the low beam on narrow roads and curves. Turn on the high beam at night when there are no streetlights on the roadside or when the road is straight and visibility is poor in the distance. When encountering an intersection at night, switch between the high and low beams twice.
Was this review help?
8
0
Share
More Forum Discussions

How to Fix Water in Headlights by Yourself?

For relatively minor cases of water ingress in the headlights, there's no need to worry too much. After the headlights have been on for a while, the moisture will evaporate and exit through the vent tube with the heat. Disassemble the headlight, open the cover, and let it dry. Then, inspect the headlight surface for any damage or potential leaks. It is recommended to replace the headlight seal and vent tube. When water enters the headlight, never attempt to dry it by baking, as this can easily damage the headlight since its exterior is made of plastic.
5
0
Share

How to Handle 12 Points Deducted from a C1 License?

If the accumulated points reach 12 within a scoring cycle, the traffic management department of the public security organ shall confiscate the motor vehicle driver's license. Within 15 days, attend a 7-day study session on traffic safety laws, regulations, and related knowledge. After completing the study, the vehicle management office should conduct a test on road traffic safety laws, regulations, and related knowledge within 20 days. If the test is passed, the points will be cleared.
13
1
Share

How is overloading in a sedan penalized?

For private cars, overloading by one person results in a 2-point deduction and a fine. For passenger vehicles, overloading by one person leads to a 6-point deduction. Generally, exceeding 50% capacity results in a fine and license suspension. For passenger vehicles, carrying passengers exceeding the approved number by less than 20% results in a 3-point deduction. The maximum capacity for private cars is only 5 people; carrying even one extra person constitutes overloading.
2
0
Share

What is the correct parking procedure for the 2021 all-new Corolla?

Observe the traffic conditions ahead and in the right lane, release the accelerator pedal, and turn on the right turn signal. Based on the distance to the parking target, appropriately depress the brake pedal. When the vehicle speed slows down, depress the clutch pedal to bring the car to a smooth stop. After the vehicle comes to a complete stop, firmly pull the parking brake lever and shift the transmission lever to neutral. Release the clutch pedal and brake pedal. Turn off the turn signal and, if necessary, turn off the ignition switch to shut down the engine.
16
4
Share

Do Cars in 2020 Still Come with In-Car CD Players?

Yes. Here are the details: 1. Definition: A car equipped with a playback system for CD-formatted audio sources (including single-disc and multi-disc players). CD is a music storage and playback format. When mentioned in car manuals, it indicates that the vehicle's audio system supports or is compatible with this format, or has interfaces to connect with specific external playback devices. 2. Single-disc CD: A car audio system that can only load one CD at a time. 3. Multi-disc CD: A car audio system capable of automatically switching between multiple CDs, allowing users to select discs and tracks via the central console. 4. CD changers are typically installed in the trunk, under the front seats, inside the front armrest box, or glove compartment.
20
2
Share

Is it normal for the brake lights to stay on after the car is turned off?

It is not normal for the brake lights to stay on after the car is turned off, and it requires timely inspection and repair, as it is likely a brake switch malfunction. Below is a detailed introduction about car brakes: 1. Overview: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of a moving locomotive, vehicle, or other transportation tools or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install corresponding brake shoes, bands, or discs on the machine base, which generate braking torque under external force. 2. Brake Pads: Car brake pads, also known as car brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel. The friction linings and blocks bear external pressure to create friction, thereby achieving vehicle deceleration.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.