How to Use the Heated Rearview Mirror on the Excelle?

What is the actual fuel consumption of the BMW 530?

The actual fuel consumption of the BMW 530 is 9.9L/100km. The 2020 BMW 530 is equipped with a 2.0T L4 turbocharged engine, model B48B20D. Body dimensions: The 2020 BMW 530 has a length of 5087mm, a width of 1868mm, a height of 1500mm, and a wheelbase of 3108mm. Power specifications: The engine has a maximum power output of 185kw, a maximum torque of 350 Nm, a maximum power speed range of 5200 to 6500 rpm, and a maximum torque speed range of 1450 to 4800 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a ZF 8-speed automatic transmission. The top speed is 250 km/h. Suspension: The BMW 530 uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.

8

2

Share

What is the fuel tank capacity of the BMW 5 Series?

The fuel tank capacity of the BMW 5 Series is 70 liters. The size of the fuel tank measures a vehicle's ability to carry fuel, and the tank volume determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. Below is a partial introduction to the BMW 5 Series: 1. Body dimensions: Taking the BMW 525i as an example, its body dimensions are 4841mm in length, 1846mm in width, and 1468mm in height, with a wheelbase of 2888mm, front track of 1558mm, and rear track of 1582mm. 2. Powertrain: The BMW 525i features a front-engine, rear-wheel-drive layout, with a top speed of 233 km/h, and is powered by an inline six-cylinder, four-valve engine.

8

1

Share

What Causes the Malfunction Indicator Light to Illuminate?

Here are the reasons why the malfunction indicator light may illuminate: 1. Sensor issues: When the coolant temperature, crankshaft position, air flow, intake air temperature, or oxygen sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data; 2. Maintenance problems: Irregular maintenance and poor driving habits can increase the operational burden on the engine; 3. Fuel quality issues: The fuel used in the car has specific octane ratings, and failure to use the required grade can cause engine wear; 4. Poor fuel mixture combustion: This can lead to engine carbon buildup or knocking issues, which are detected by the engine's oxygen sensor; 5. False alarms: These may occur due to minor collisions during driving, tampering with engine connectors, or temporary ECU signal interruptions.

17

3

Share

What is Full-Time Four-Wheel Drive?

Full-time four-wheel drive means that at all times, the vehicle is independently driven by all four wheels. In English, it is abbreviated as "AWD" (All-Wheel Drive) to distinguish it from 2WD (which includes FWD and RWD). Full-time four-wheel drive distributes driving force to all four tires through a flexibly connected central differential, and then via independent differentials on the front and rear axles. Unlike purely mechanical differential locks, the differential in full-time four-wheel drive can be either a viscous coupling or a multi-clutch type, but both allow for a speed difference between the front and rear wheels, as well as between the left and right wheels. Whether a vehicle has full-time four-wheel drive depends entirely on the construction of the transfer case. Below is relevant information: Disadvantages: It only starts transferring power to non-slipping tires after detecting slippage in a particular tire, which means the response can be slower. More importantly, these viscous or electronic differentials cannot completely lock the power distribution at 50:50 like a mechanical differential lock. Because of this, full-time four-wheel drive is often dismissed by hardcore off-road enthusiasts as "fake off-roading," unable to match the capabilities of part-time four-wheel drive in extreme conditions like climbing mountains or fording rivers. Advantages: Theoretically, it is the ideal driving method for vehicles, providing better tire grip, more effortless high-speed cornering, and easier handling, thereby enhancing both safety and performance. Since power is always distributed to all four wheels, when one wheel begins to slip, the system automatically intervenes to redistribute power to ensure optimal traction at all times. This system offers significant handling advantages on slippery surfaces. As a result, more and more SUVs and sedans adopt full-time four-wheel drive not just for off-roading but for the stability and active safety it provides, especially in high-performance cars. Section: Excellence and Safety

13

2

Share

At what temperature does the BMW N55 engine's cooling fan start to operate?

Water temperature generally reaches between 93-98 degrees Celsius for the fan to operate at low speed. Overheating caused by insufficient coolant: Water needs to be added, but to prevent engine damage, water should not be added immediately. Typically, the car's hood should be opened first, followed by the engine cover to allow ventilation and heat dissipation. Water should only be added after the coolant temperature has decreased. Water pump failure leading to overheating: This may be due to seized bearings or damaged impeller blades. The likelihood of seized bearings is low, and replacing the damaged impeller blades should resolve the issue. Blown fuse causing overheating: Alternatively, the thermostat switch may have blown. In this case, it is crucial not to turn off the engine. Instead, open the hood and use cold water to spray the car's radiator to rapidly lower the water temperature.

11

2

Share

What Maintenance is Required for a Car After Driving 40,000 Kilometers?

For a car that has driven 40,000 kilometers, the main maintenance items include changing the engine oil, three filters, and all vehicle fluids, along with some necessary routine inspections such as replacing brake fluid, transmission fluid, power steering fluid, and coolant. Additional information about car maintenance is as follows: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. The maintenance cycle is preset when the vehicle leaves the factory. A "wrench" symbol will appear at certain mileage intervals to remind the driver to perform maintenance in a timely manner. Typically, the maintenance cycle for a car is every 5,000 to 8,000 kilometers driven, and the factory-set cycle is usually longer than 8,000 kilometers.

12

5

Share

How to Use the Heated Rearview Mirror on the Excelle?

What is the actual fuel consumption of the BMW 530?

What is the fuel tank capacity of the BMW 5 Series?

What Causes the Malfunction Indicator Light to Illuminate?

What is Full-Time Four-Wheel Drive?

At what temperature does the BMW N55 engine's cooling fan start to operate?

What Maintenance is Required for a Car After Driving 40,000 Kilometers?

How often should a Volkswagen Passat be serviced?

What to Do When the Car Door is Frozen and Won't Close?

Which parts of the BMW X3 body use aluminum alloy?

What is the particulate filter in the Volkswagen Tayron?