How to Use the Headlight Washer in Forester?

What are the causes of tire wear?

Tire wear reasons are as follows: 1. Large differences in tire pressure; Significant variations in pressure among tires can cause uneven wear. Tire pressure is critical - both overinflation and underinflation will shorten tire lifespan. If only the center wears faster with normal shoulder wear, it's caused by overinflation. If shoulder wear is excessive with normal center wear, it's due to underinflation. 2. Inaccurate wheel alignment; If the four wheels aren't properly aligned to required horizontal and vertical axes, tires on the same side may experience abnormal wear during driving. This occurs because the vehicle's self-correction creates abnormal friction on certain tire areas, accelerating wear. Toe angles that are too small or large cause sawtooth-shaped shoulder wear. Excessive smooth wear on a single shoulder indicates incorrect camber angles. 3. Steering gear or brake system malfunctions. During vehicle use, regular tire rotation is necessary. Since front and rear tires wear differently, owners should rotate tires in a cross pattern after certain mileage to ensure even wear distribution and extend service life.

12

5

Share

How is the new Santana 1.4?

The following is an introduction to the new Santana 1.4: 1. Engine and transmission. The Santana manual comfort version is equipped with a 1.4L engine, with a maximum power of 90 horsepower and a maximum torque of 132 Nm, paired with a five-speed manual transmission. Judging from the engine data, although the power is not very abundant, it is sufficient for daily use. The five-speed manual transmission has also undergone long-term testing and has good stability. 2. Exterior. The Santana's body dimensions are 4475/1706/1469mm, with a wheelbase of 2603mm. In terms of body size, as an A-class sedan, its passenger space can meet the needs of daily family use. 3. Chassis. In terms of chassis structure, the front suspension uses a MacPherson independent suspension, and the rear suspension uses a composite torsion beam non-independent suspension. The Santana's chassis tuning is relatively firm, so it performs well in terms of handling. 4. Configuration. The configuration of this model is not very rich. The main safety configurations, such as brake assist, traction control, and body stability system, are not equipped.

13

3

Share

How to Reset the Tire Pressure Warning Light on Lavida?

To address the illuminated dashboard warning light on the Lavida, you need to resolve the vehicle's issue first and then clear the fault code. The dashboard light fuse is located in the fuse box inside the main driver's compartment. The dashboard light may not illuminate due to a damaged instrument cluster or a blown fuse. Below are details about dashboard lights: 1. Indicator Lights: These are the most common lights you encounter while driving, such as turn signals, parking lights, etc. Their purpose is to indicate the status of various vehicle functions. 2. Warning Lights: These serve as alerts, such as the fuel indicator, door status indicator, seatbelt indicator, etc. Typically, warning lights turn off after the driver takes the corresponding action. For example, the seatbelt indicator turns off once the seatbelt is fastened. 3. Fault Indicator Lights: These are the most critical indicators, such as the generator fault light, transmission fault light, etc. These lights rarely come on during normal operation or may briefly illuminate when starting the engine. If a fault indicator light stays on continuously and is accompanied by a warning sound, it indicates that the vehicle has a malfunction or abnormality.

20

5

Share

What are the three filters in maintenance?

Three filters refer to: oil filter, air filter, and fuel filter. These three filters play a crucial role in filtering air, oil, and fuel for the car engine, thereby protecting the engine. Below are the relevant details: 1. Air Filter: Ensures clean air enters the engine. The air contains suspended dust, mainly composed of silicon dioxide, which is harder than metal. Installing an air filter reduces wear on components such as cylinders, pistons, and piston rings. Without it, cylinder wear increases by 7 times, piston wear by 3 times, and piston ring wear by 8 times. Therefore, modern car engines are equipped with air filters near the carburetor (or the intake control device of fuel-injected engines). 2. Fuel Filter: Ensures clean fuel and prevents vapor lock. During storage, transportation, and refueling, fuel can inevitably mix with impurities and water. These impurities, when carried into the fuel supply system and engine cylinders, accelerate cylinder wear. Before fuel enters the fuel pump, it must be filtered to ensure the proper functioning of the fuel supply system. 3. Oil Filter: Filters engine oil to ensure smooth engine operation and is the most important among the three filters. During the use of internal combustion engines, mechanical impurities such as dust, metal shavings, and carbon deposits continuously mix into the oil. Additionally, oxidation caused by air and combustion exhaust gases gradually forms sludge in the oil. This not only accelerates wear on moving parts but also easily clogs oil passages. To ensure oil cleanliness, engines are equipped with oil filters in the lubrication system.

3

4

Share

Which country is Maserati produced in?

Maserati is produced in Italy. Here is some information about Maserati: 1. It was founded on December 1, 1914, in Bologna, and its headquarters are now located in Modena. The brand's logo is a trident. 2. In 1993, Fiat acquired Maserati, allowing the brand to be preserved. 3. The Maserati series comes in fourteen colors: white, deep blue, noble blue, alpine white, passion blue, diamond black, inkstone black, wine red, mercury gray, rock gray, alps white, cloud white, expression blue, and classic bronze. 4. The Maserati body structure is a 4-door, 5-seater sedan with a length of 5262mm, width of 1948mm, height of 1481mm, a wheelbase of 3171mm, and an 8-speed automatic transmission.

8

0

Share

Does Medical Alcohol Damage Car Paint?

Alcohol is a strong solvent that can damage car paint and affect its gloss. It is recommended to use specialized cleaning solutions at a car wash. Below is relevant information: 1. Simply put, car paint coating involves applying a protective layer on the surface of the paint, providing an invisible physical shield to protect the paint. 2. The main component of car paint is resin, which has relatively large molecular gaps. After coating, small molecular elements such as silicon, silicon dioxide, and nano-inorganic silicon in the coating solution can fully penetrate into the molecular gaps and micro-pores of the paint, forming a transparent crystalline layer similar to a phone screen protector. This significantly enhances the hardness and scratch resistance of the paint surface, providing long-term sealing protection and keeping the paint looking bright and new for a long time.

11

3

Share

How to Use the Headlight Washer in Forester?

What are the causes of tire wear?

How is the new Santana 1.4?

How to Reset the Tire Pressure Warning Light on Lavida?

What are the three filters in maintenance?

Which country is Maserati produced in?

Does Medical Alcohol Damage Car Paint?

Which has more space, the Qashqai or the Tharu?

What is the Chinese name for Polo?

What does the Sagitar fuel pump recall mean?

Which is better, front-wheel drive or rear-wheel drive?