How to Use the Headlight Cleaning Function on the Cadillac XT4?

1 Answers
VanRebecca
07/30/25 3:14am
The Cadillac XT4 does not have a separate headlight cleaning function; it is integrated with the windshield cleaning function. To use it, turn on the headlights and pull the wiper lever for a few seconds, and the headlights will automatically start cleaning. The Cadillac XT4 is a compact SUV under the Cadillac brand, with dimensions of 4600mm in length, 1881mm in width, and 1627mm in height, and a wheelbase of 2779mm. In terms of power, the Cadillac XT4 is equipped with a 2.0-liter turbocharged engine across all models, delivering a maximum power of 177 kW and a maximum torque of 350 Nm. The engine features a variable valve management system and direct fuel injection, along with an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission (9AT).
Was this review help?
15
4
Share
More Forum Discussions

What is the fuel consumption of the Audi S5?

The fuel consumption of the Audi S5 is 15-20 liters per 100 kilometers. Below is a detailed introduction to the Audi S5: Exterior Design: The front of the Audi S5 features a fierce design style, complemented by a large polygonal grille, giving the front face a very aggressive look. Interior Configuration: The interior presents a youthful design style, paired with black carbon fiber trim, aligning with the car's positioning. This model is equipped with multiple features such as a 360-degree panoramic camera, front side airbags, GPS navigation system, etc., offering rich functionality that greatly enhances its convenience. Powertrain: It is equipped with a 3.0T V6 engine, delivering a maximum power of 260 kW and a peak torque of 500 Nm, paired with an automatic transmission. The suspension system adopts a combination of front five-link independent suspension and rear five-link independent suspension, along with a front-mounted four-wheel-drive configuration.
16
5
Share

Can the Song Plus DMP be delivered by the end of the year?

Song Plus DMP can be delivered by the end of the year, as it was announced by the Ministry of Industry and Information Technology in June. Below are the detailed specifications of this vehicle: Basic parameters: The dimensions are 4705x1890x1670mm, with a top speed of 180km/h and a curb weight of 1975kg. Powertrain: Equipped with a 1.5T engine, producing 102kw, with an engine net power of 96kw. The drive motor is a permanent magnet synchronous motor, with a rated power of 70kW/65kW and a peak power of 145kW/120kW. The combined fuel consumption is 1.1L/100km.
18
2
Share

Why does the Volvo steering wheel make abnormal noises when turning?

Volvo steering wheel squeaking when turning is usually caused by the friction sound between the horn wire transmission spring steel plate and the steering wheel. The noise typically originates from inside the vehicle and presents as a rustling metal friction sound. Generally, abnormal noises during steering wheel rotation are normal phenomena, such as friction between plastic components or noises when the steering wheel is turned to its limit. Below are relevant explanations: Lack of lubricant at friction points: Insufficient lubricant between the spring steel plate and the steering wheel causes abnormal noises. Excessive or insufficient front wheel toe-in: Improper front wheel toe-in leads to non-parallel steering of the front wheels, resulting in tire scrubbing sounds. Excessive wear of the half-shaft CV joint: Abnormal noises caused by excessive wear of the vehicle's half-shaft CV joint should prompt immediate replacement.
17
1
Share

What is the fuel consumption of the Mengshi?

Dongfeng Mengshi has an average fuel consumption of 11.3L per 100 kilometers. The specific fuel consumption standard should be based on actual usage, as fuel consumption is related to various factors, such as load, uphill driving, air conditioning usage, low tire pressure, etc. This model is equipped with a 6.5t engine, which results in relatively high fuel consumption. The main factors affecting fuel consumption are as follows: Engine: This is an inherent factor affecting fuel consumption. From a purely technical perspective, direct fuel injection is an excellent technology. Transmission: Here, transmission refers to automatic transmission. The engine and transmission form the simplest power output system, so the construction of the transmission also directly affects fuel consumption. Driving habits: This is an acquired factor affecting fuel consumption and also the most significant factor influencing fuel consumption.
9
1
Share

What is the weight of new energy electric vehicles?

New energy electric vehicles typically weigh around two tons. Below is an introduction to vehicle weight and its impact on fuel consumption: Weight of other vehicle types: Micro cars weigh approximately 700 kilograms, sedans weigh over 900 kilograms, generally around 1.2 tons, while jeeps usually range between 1 to 2.5 tons. Impact of weight on fuel consumption: The curb weight of a vehicle refers to its own weight, which includes the weight of the car under normal driving conditions plus any attached accessories. The curb weight is also an important parameter affecting a car's fuel consumption, as there is a proportional relationship between fuel consumption and curb weight—meaning that vehicles with greater curb weights consume more fuel.
5
2
Share

How Many Liters of Transmission Fluid Does the Highlander Need?

When replacing the transmission fluid in the Highlander, manual fluid replacement (gravity drain) requires 4 to 6 liters; using a fluid exchange machine requires approximately 9 to 12 liters. Functions of transmission fluid: Reduce friction and wear, control clutch friction and synchronizer performance; bear loads (low-speed high torque, vibration loads), dissipate heat, reduce vibration and noise, remove contaminants from gear meshing (cleaning function); prevent corrosion, pitting, and surface metal tearing, isolate metal surfaces, and prevent direct metal-to-metal contact. Hazards of not replacing transmission fluid for a long time: Damage to the transmission's shift control mechanism; abnormal wear of gears and clutch plates inside the transmission; affect the normal operation of the transmission, leading to damage of the transmission valve body. Methods for replacing transmission fluid are as follows: Loosen the drain screw at the bottom of the transmission to drain the fluid before refilling. Remove the transmission oil pan directly for draining and refilling: This method is more thorough than the previous one, removing impurities from the bottom of the oil pan. Using a circulation machine to replace automatic transmission fluid: Dynamic fluid replacement with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.