How to use the gears of Dongfeng Fengguang S560 automatic transmission?

Where to Check the Tire Pressure Display in a Car?

The tire pressure display is located on the car's dashboard. If the car does not have an original tire pressure monitoring function, it will have a tire pressure warning. When the inflation pressure of one or more tires is significantly low, the low-pressure tire position indicator light will illuminate the corresponding position indicator to show the location of the tire with significantly low pressure. When the tire pressure is too high, it reduces the contact area between the tire and the ground, increasing the pressure the tire bears and affecting its grip. Additionally, when the vehicle passes over bumps or uneven roads, the tire lacks sufficient space to absorb shocks, which not only affects driving stability and ride comfort but also increases the impact on the suspension system, leading to potential hazards. Moreover, the risk of a tire blowout increases correspondingly in high temperatures.

6

0

Share

Where is Dongfeng Fengguang produced?

Dongfeng Fengguang is produced domestically in China. It is a passenger vehicle sub-brand under the Dongfeng Motor brand and is manufactured by Dongfeng Xiaokang Automobile Co., Ltd. Dongfeng Fengguang is dedicated to building a comprehensive passenger vehicle brand that includes MPVs, SUVs, and sedans. Currently, it offers five SUV models: the Fengguang 580, Fengguang 580Pro, Fengguang ix5, Fengguang ix7, and Fengguang S560. The Fengguang 580 has dimensions of 4690mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2780mm. Its front suspension features a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension, with a front-wheel-drive configuration.

14

3

Share

Where is the fuel filler switch on the Porsche 718?

The fuel filler switch on the Porsche 718 is located on the door. The fuel tank cap button and the door share the same locking system. If the door lock is in the unlocked state, the fuel tank cap can be opened with a light press. Conversely, if the central door lock is engaged, the fuel tank cap cannot be opened. The dimensions of the 2019 Porsche 718 Cayman T are 4379mm in length, 1801mm in width, and 1276mm in height, with a wheelbase of 2475mm. Both the front and rear suspensions of the 2019 Porsche 718 Cayman T are MacPherson independent suspensions, the body structure is a unibody, and the drivetrain is mid-engine, rear-wheel drive.

18

2

Share

What is the correct procedure to start an Audi Q5?

Audi Q5 correct starting procedure: 1. Use keyless entry to enter the vehicle, adjust the driver's seat position, fasten the seat belt, and use the one-button start to first activate the power supply; 2. After activating the power supply, check the instrument panel for any fault displays, proceed to the next step if everything is normal; 3. Use the knob on the driver's armrest to adjust the rearview mirror to a suitable angle, and turn on the low beam headlights if it's nighttime; 4. Press the brake pedal and start the vehicle's engine, wait for the engine to warm up before driving; 5. Keep the brake pedal pressed, push the electronic gear lever backward to engage D (Drive) gear; 6. Press the electronic parking brake behind the gear lever, turn on the left turn signal, and proceed to drive normally. The Audi Q5 has a length of 4629mm, width of 1898mm, height of 1655mm, and a wheelbase of 2807mm, with a front-engine, four-wheel-drive layout.

13

1

Share

How to Open the Front Hood of a Toyota Crown?

Toyota Crown front hood opening method: 1. Locate the release handle under the dashboard near the driver's left calf (toward the front of the vehicle), pull it to make the hood pop up about 1cm; 2. With one hand lifting the hood, use the other hand to reach above the grille and find the auxiliary hood latch handle; 3. Lift the latch upward while simultaneously raising the hood; 4. Secure the support rod. The Toyota Crown measures 5005mm in length, 1810mm in width, and 1500mm in height, featuring double-wishbone front suspension, multi-link rear suspension, and front-engine rear-wheel drive configuration.

4

1

Share

How to Adjust the Headlight Height of the Honda Vezel?

Honda Vezel headlight height adjustment method: The headlight adjustment button is located on the center console to the left of the steering wheel, which can be used to adjust the headlight height. The higher the number on the knob, the lower the headlight height, meaning the headlight beam direction is more inclined toward the ground. Some high-end luxury vehicles feature automatic headlight height adjustment via sensors, a function that actually enhances driving safety. The Honda Vezel is the first SUV under GAC Honda, with dimensions of 4294mm in length, 1772mm in width, and 1605mm in height, and a wheelbase of 2610mm. The Vezel is available with front-wheel drive or electronically controlled real-time four-wheel drive, featuring a MacPherson independent front suspension and a torsion beam rear suspension system.

7

0

Share

How to use the gears of Dongfeng Fengguang S560 automatic transmission?

Where to Check the Tire Pressure Display in a Car?

Where is Dongfeng Fengguang produced?

Where is the fuel filler switch on the Porsche 718?

What is the correct procedure to start an Audi Q5?

How to Open the Front Hood of a Toyota Crown?

How to Adjust the Headlight Height of the Honda Vezel?

What does ATM mean in cars?

How to Set Cruise Control on BYD S7?

How to Use the Folding Function of Magotan's Rearview Mirrors

How to Bleed Hydraulic Brakes?