How to Use the Gears of Baojun 310?
4 Answers
Below is the method for using the gears of Baojun 310: 1. Press the brake, shift the gear into R (Reverse), and gently release the brake to reverse the vehicle. 2. Shift the gear into N (Neutral), which is used when parking. 3. Shift the gear into D (Drive), which is for forward movement. 4. Shift the gear into M (Manual), which is the manual shifting driving mode. The dimensions of the Baojun 310 are 4032/1680/1450 mm, with a wheelbase of 2550 mm. Its ultra-long wheelbase in its class provides a more comfortable seating space for passengers, and the rear seats support a 4/6 split folding, further expanding the flat cargo space of the trunk. In terms of power, the Baojun 310 is equipped with a 1.2L and a 1.5L four-cylinder engine. The 1.2L engine has a maximum power of 82 horsepower, and the 1.5L engine has a maximum power of 111 horsepower, paired with a 5MT, 6MT, or 5AMT automatic transmission, with a minimum fuel consumption of only 5.3L per 100 kilometers.
I've been driving a manual transmission for seven or eight years, and the Baojun 310's gear layout is the classic five-speed forward plus reverse. When starting, press the clutch all the way down with your left foot, shift into first gear with your right hand, slowly release the clutch to the biting point until you feel the car shake, lightly press the accelerator with your right foot, and once the car moves, fully release the clutch. Don't rush when shifting gears; the engine runs smoothest around 2500 RPM. Shift to second gear at 20 km/h, third at 40, fourth at 60, and fifth around 80. Remember to come to a complete stop before shifting into reverse—some cars require pressing down the gear knob to engage it. The key is coordinating the clutch and throttle; practice a few times at first, and it'll become second nature. Don't forget to leave the car in first gear when parked for long periods to prevent rolling, and check the shift linkage bushings for wear during maintenance.
The Baojun 310 uses a traditional manual transmission, with a clear gear pattern marked on the shift knob. Always depress the clutch pedal before starting and ensure the car is in neutral when igniting. For daily driving, shifting gears based on speed is most convenient: start in first gear and shift to second after moving three to four meters, use third gear around 30 km/h in urban areas, fourth gear at 40-50 km/h, and shift to fifth gear for highway driving above 60 km/h. When downshifting, remember to blip the throttle for smoother gear changes. Pay special attention when reversing; the car must come to a complete stop before pressing the shift lever down and pushing it to the top-left position. The clutch pedal has a long travel, which can make the left foot tired in traffic jams, so it's recommended to shift to neutral and release the clutch at red lights for a break. If the gearshift feels stiff, applying some lubricant to the shift linkage can help.
The Baojun 310 manual transmission is quite straightforward to operate. Depress the clutch fully to start the vehicle, shift to first gear to get moving, then quickly switch to second gear. Each gear corresponds to a specific speed range: second gear for 20-40 km/h, third for 40-60, fourth for 60-80, and fifth gear is reserved for highway speeds. The key is to listen to the engine sound - shift up when it starts humming, and downshift when it begins to sputter. The reverse gear is located in the top-left position and usually requires pressing down the gear knob to engage. Always fully depress the clutch when shifting, otherwise gear grinding may occur. Regular maintenance should include attention to the transmission fluid replacement cycle, and the clarity of the reversing camera can also affect confidence when engaging reverse. New car gears might feel slightly stiff initially, but they'll smooth out after a few hundred kilometers of driving.
