How to Use the Gear Shift in Corolla Hybrid?

What kind of vehicle is the Benelli 302s?

Benelli 302s is a mid-weight new street motorcycle sharing the same engine platform as the Benelli Tornado 302, produced under the Italian brand Benelli. Below are the detailed specifications: Brand Introduction: Benelli is one of the oldest motorcycle manufacturers in Italy and the world. Established in 1911, the company has weathered numerous challenges, continuing production even through wars and economic depressions. Body Configuration: The Benelli Street 302s measures 2130mm in length, 800mm in width, and 1120mm in height, with a wheelbase of 1410mm and a seat height of 795mm, making it suitable for most domestic riders. With a minimum ground clearance of 175mm, its body design is highly suitable for urban street riding. It comes with a 16-liter fuel tank, fully meeting daily needs. The braking system features a large 260mm dual-disc wave rotor with four-piston calipers at the front and a 240mm single-disc dual-piston caliper combination at the rear, paired with dual-channel ABS for superior braking performance. Performance Configuration: It continues to use the stable 300mL twin-cylinder, four-stroke, eight-valve water-cooled engine, delivering a maximum power of 26kW (at 12000r/min).

1

2

Share

What is the Difference Between 18-inch and 19-inch Wheels?

18-inch and 19-inch wheels have similar tire widths, and the rolling radius error is less than 0.4%, which means they should have almost the same footprint. The specific differences between the two are as follows: 1. In terms of braking performance on dry roads, there is almost no difference between 18-inch and 19-inch tires. However, 18-inch tires perform better on wet roads, and they also excel in cornering hydroplaning. 2. During dry handling tests, the subjective feel of the tires shortens as the size increases. The faster lap times of 19-inch tires are not because the larger wheel size provides more grip, but because these tires offer sharper and more responsive steering, while 18-inch tires make the car feel softer and less precise. Therefore, 19-inch tires give the driver more confidence and stability, with a stronger subjective sense of control.

10

3

Share

What is the fuel consumption of the Regal 1.5t?

The comprehensive fuel consumption of the Regal 1.5t is approximately 8.6 liters per 100 kilometers. The fuel consumption of a car depends not only on the car itself but also on the driving conditions and the driver's habits. Below is relevant information about the Regal's engine: 1. The Regal is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine has a maximum power of 125 kW, a maximum torque of 252 Nm, a maximum power speed of 5600 rpm, and a maximum torque range of 2000 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The 2.0-liter turbocharged engine has a maximum power of 192 kW, a maximum torque of 350 Nm, a maximum power speed of 5400 rpm, and a maximum torque range of 2000 to 5000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 4. The Regal's front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension. The Regal is equipped with an electric power steering system.

6

0

Share

What Causes the Steering Wheel to Lean to the Right?

Reasons for a car's steering wheel leaning to the right: 1. Excessive play in the steering gear. 2. Inconsistent tire pressure among the four tires. 3. Misalignment of the front wheel positioning angles, excessive toe-in. 4. Front tire pressure too high or too low, or dynamic imbalance due to tire repairs or other reasons. Here are the adjustment methods for a steering wheel leaning to the right: 1. Adjust from the left and right tie rods of the steering gear—tighten one side while loosening the other to straighten the steering wheel. 2. If the steering wheel is off by just one spline tooth, you can also remove the steering wheel and rotate it by one tooth's angle. 3. Unequal left and right steering angles. If a four-wheel alignment has been performed, the steering wheel angle discrepancy will be minimal. Adjusting from the left and right tie rods of the steering gear will not significantly affect the steering angle.

11

2

Share

What to Do When Your Car Gets Scratched While Parked Outside the Residential Area?

If your car gets scratched while parked outside the residential area, the first step is to check the surveillance footage to identify the responsible party. If the culprit cannot be found, you should file a claim with your insurance company, provided that you have purchased scratch insurance. Below are the steps to handle a car scratched while parked outside the residential area: 1. Report the Incident: Call your insurance company to report the incident or dial 110 to alert the police. Follow the insurer's instructions for further processing. 2. Accident Investigation: An insurance adjuster will assist the policyholder in investigating the cause, nature, responsibility, and extent of the damage. 3. Damage Assessment: Collaborate with the insurer, repair shop, or relevant parties to determine the location, items, and cost of the damage. 4. Claim Submission: Based on the type of damage, gather the necessary documents for the claim and submit them to the insurer for processing. 5. Claim Payment: After verifying the incident and claim documents, the insurer will compensate the policyholder according to the insurance policy.

16

0

Share

Where is the rearview mirror heating switch for the Southeast DX3?

The Southeast DX3 has two designs for the rearview mirror heating control switch: one is integrated with the electric rearview mirror adjustment combination switch, and the other is located on the air conditioning control panel. Here is some relevant information about rearview mirror heating: 1. After pressing the button, the heating elements behind the rearview mirror glass will quickly heat up to a fixed temperature (usually between 35-60 degrees Celsius) within a few minutes, with steam visible from both side mirrors. As the temperature rises, water droplets on the mirror surface will evaporate and gradually shrink, while fog will slowly disappear, achieving the effects of heating, defogging, and defrosting the mirror. 2. During heavy rain, the effectiveness of rearview mirror heating may decrease and become less noticeable. 3. The rearview mirror heating function should not be used frequently. Each use should not exceed 30 minutes, as prolonged use may affect the mirror's lifespan and clarity. 4. When using the rearview mirror heating function, ensure the vehicle is in an ignited state. Avoid using this function when the engine is cold. If the battery is low on charge or malfunctioning, the rearview mirror heating may not activate.

2

1

Share

How to Use the Gear Shift in Corolla Hybrid?

What kind of vehicle is the Benelli 302s?

What is the Difference Between 18-inch and 19-inch Wheels?

What is the fuel consumption of the Regal 1.5t?

What Causes the Steering Wheel to Lean to the Right?

What to Do When Your Car Gets Scratched While Parked Outside the Residential Area?

Where is the rearview mirror heating switch for the Southeast DX3?

What are the effects of rain on the GSX250R?

What are the reasons why the Suzuki GSX250R won't start?

How to Control the Steering Wheel of a Car?

How to Remove the Navigation System of Changan Honor