How to Use the Gear +M- in Toyota Wildlander?

How to Replace the Antifreeze in Tiguan?

Tiguan antifreeze replacement method: 1. Open the car hood after the engine has cooled down; 2. Unscrew the drain plug at the bottom of the radiator to empty the antifreeze; 3. Keep the vehicle idling while continuously adding clean water to the antifreeze reservoir; 4. After the water stops dripping, tighten the drain valve and turn off the engine; 5. Pour new antifreeze into the reservoir; 6. Start the engine to expel air from the cooling system pipes, the antifreeze level will drop; 7. Once the level stabilizes, top up the antifreeze between the MIN and MAX marks to complete the replacement.

3

2

Share

How to open the hood of Honda CR-V?

To open the hood of the Honda CR-V, follow these steps: In the driver's position, there are two switches—one for opening the fuel tank and another for the front hood. Pull the front hood switch, then go to the front of the car where you'll notice the hood slightly raised with a gap. Insert your hand into the gap to locate the release mechanism, and apply a little force to open it. The Honda CR-V measures 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. It is a 5-door, 5-seater SUV with a 6-speed manual transmission, front-wheel drive, and electric power steering.

16

2

Share

What engine is used in the BAIC Senova X35?

BAIC Senova X35 uses the A151 1.5L engine. Although this engine is domestically produced, its core technology originates from Japan. Taking the 2016 BAIC Senova X35 as an example: the dimensions of this car are 4300mm in length, 1815mm in width, and 1640mm in height, with a wheelbase of 2570mm. The front suspension of this car is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116ps, a maximum torque of 148Nm, and a maximum power of 85kW. It is paired with a 4-speed automatic transmission.

18

0

Share

Should the Electronic Parking Brake Be Engaged When Turning Off the Engine?

It is necessary to engage the electronic parking brake when turning off the engine to prevent the vehicle from rolling and ensure safety. Most electronic parking brakes are automatically engaged after the engine is turned off and the ignition switch is closed, but some vehicles require manual engagement or unlocking. The electronic parking brake is a technology that achieves parking braking through electronic control. The basic parking function of the electronic parking brake has been extended to include the automatic parking function AUTOHOLD. The application of AUTOHOLD automatic parking technology allows drivers to avoid prolonged braking when the vehicle is stationary. With the automatic electronic parking brake activated, unnecessary sliding of the vehicle can be prevented.

7

1

Share

How to adjust the headlights of Wuling Hongguang?

Wuling Hongguang headlight adjustment method: Open the hood, locate the two adjustment screws near the headlights, one for adjusting height and the other for adjusting left-right alignment. Car headlights can enhance driving safety during nighttime or adverse weather conditions. The Wuling Hongguang is a microvan produced by SAIC-GM-Wuling, with a wheelbase of 2720mm. It is equipped with a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission and a 6-speed manual transmission. The drivetrain configuration is front-engine, rear-wheel drive, and the suspension system features MacPherson strut independent front suspension and leaf spring non-independent rear suspension.

11

4

Share

Do You Need to Press the Brake When Shifting from N to D in an Automatic Car?

Automatic cars require pressing the brake when shifting from N to D. The brake is a mechanical braking device that slows down the vehicle, also known as a decelerator. The car brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake lever linkage to be pressurized and transmitted to the brake pads on the brake drum, clamping the brake disc and slowing or stopping the vehicle. An automatic transmission typically refers to a car's automatic gear-shifting mechanism. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine speed and load, replacing the driver's subjective judgment and gear-shifting operations. Common automatic cars have six gear positions, from top to bottom: P, R, N, D, S, L.

8

1

Share

How to Use the Gear +M- in Toyota Wildlander?

How to Replace the Antifreeze in Tiguan?

How to open the hood of Honda CR-V?

What engine is used in the BAIC Senova X35?

Should the Electronic Parking Brake Be Engaged When Turning Off the Engine?

How to adjust the headlights of Wuling Hongguang?

Do You Need to Press the Brake When Shifting from N to D in an Automatic Car?

What brand is MileagePlus tires?

What to Do When the Engine Malfunction Light Comes On After Refueling?

What Causes Stuttering in Car Window Operation?

What Causes Engine Valve Noise?