How to Use the Function of Rearview Camera?

How to Check if a Car is New?

Check the production date on the car's dedicated nameplate to determine if it is new. If the production date is far from the present, it may indicate that the car is a stock vehicle, display car, or refurbished test drive vehicle. Below are details on how to determine if a car is new: 1. Check the car's nameplate: The nameplate contains various information, including the engine model, engine displacement, and the car's production date. 2. Inspect the windshield: The production date of the windshield can usually be found in the corner. Unless the windshield has been replaced due to damage, this date should not differ significantly from the car's overall production date. 3. Look at the VIN (Vehicle Identification Number): Located below the windshield, the VIN is a 17-digit code, commonly referred to as the chassis number. It consists of three main parts: the World Manufacturer Identifier (positions 1-3), the Vehicle Descriptor Section (positions 4-9), and the Vehicle Identifier Section (positions 10-17). Pay special attention to the 10th digit, which indicates the manufacturing year. If this year is significantly earlier than the current year, the car may be long-stocked inventory. 4. Examine the engine: A new car's engine compartment is typically clean, starts quickly, runs smoothly without shaking, and produces minimal vibration when touched. Inside the car, the engine noise should be barely audible.

12

2

Share

Under which company is NIO affiliated?

NIO is the automotive brand under NIO Inc., which is both a brand name and a corporate entity. Its English name is NIO, specializing in the production of intelligent electric vehicles as a global brand. The company is listed on the New York Stock Exchange. Its main product lineup includes the NIO ES6, NIO ES8, NIO EC6, NIO EVE, and NIO EP9. Below is an overview of NIO: 1. NIO is a Chinese automotive brand, established relatively recently in 2014 with investments from individuals and corporations such as Richard Liu (Liu Qiangdong), Tencent, and William Li (Li Bin). Later, it also secured investments from major companies like Baidu and Lenovo. It can be said that NIO garnered substantial funding in its early stages, receiving investments from various internet giants, making a grand entrance that caused a sensation in the automotive industry. 2. Currently, NIO's vehicle models include the NIO ES8, NIO EVE, and NIO EP9, among which the NIO EVE is only a concept car. The NIO EP9 stands out for its exceptional performance as a high-powered supercar, with a maximum output reaching 1360 horsepower, surpassing the power of most renowned sports cars.

5

2

Share

How to Determine the Stopping Point for Hill Start in Subject 2?

For determining the stopping point in the hill start of Subject 2, you can use the wiper reference point method. When the convex point of the wiper, the designated stopping pole, and your line of sight align in a straight line, apply the brakes. Below are some relevant tips for Subject 2 test: 1. Master the three-point alignment method: The three points refer to the driver's eyes, a reference point on the vehicle, and a reference point on the ground. During the Subject 2 operation, it's crucial to accurately identify and observe these points to ensure precision. 2. Pay attention to the four corners of the vehicle: The front corner is prone to touching the outer line during reverse parking, while the rear corner may touch the side lines of the parking space. During curve driving, the front corner might go out of line. In right-angle turns, the front corner can easily cross the line. For parallel parking, the front corner may touch the outer line or the left front corner of the parking space, and the right rear corner could touch the right parking line. Therefore, always be mindful of the four corners and the outer lines. 3. Maintain a slow speed: This is the fundamental rule for practicing Subject 2. Ensure the vehicle moves as slowly as possible without stalling, as slower speeds allow more time for adjustments. 4. Adjust the rearview mirrors properly: After getting in the car, always adjust the rearview mirrors, which is especially important for reverse parking and parallel parking. Generally, the mirrors should be set lower than usual, with the rear door handle close to the upper edge of the mirror, to clearly see the ground markings.

7

3

Share

Can Nighttime Surveillance Capture the Inside of a Car?

Nighttime surveillance can capture the inside of a car, but if the car's window tint is very dark, the surveillance may not be able to see inside the vehicle at night. Below is a detailed introduction about surveillance: Introduction: Surveillance cameras, also known as computer cameras, electronic eyes, or webcams, are video input devices widely used in video conferencing, telemedicine, and real-time monitoring, among other applications. The standard version of a surveillance camera includes remote monitoring cameras and network remote monitoring cameras in their basic forms. Classification: Remote surveillance cameras are mainly divided into three categories: standard, enhanced, and outdoor versions. They can rotate 320 degrees horizontally and 60 degrees vertically for monitoring, take photos or record videos of the scene, and send the captured images or recordings to an email address.

4

2

Share

Are motorcycles prohibited on Shandong Expressways?

Motorcycles are prohibited on Shandong Expressways. Here are the specific details regarding the motorcycle ban on Shandong Expressways: Regulations: According to Article 39 of the 'Shandong Province Expressway Regulations', pedestrians, non-motor vehicles, motorcycles, tricycles, tractors, iron-wheeled vehicles, tracked vehicles, full trailers, wheeled special machinery, and motor vehicles with a design speed below 70 km/h are prohibited from entering expressways. Reminder: The expressway traffic police remind the public not to walk, ride bicycles, electric bikes, motorcycles, etc., on expressways. Not only is it legally prohibited, but more importantly, it poses safety hazards to oneself and others.

12

2

Share

Is the inability to shift gears caused by the clutch plate issue?

Is the inability to shift gears caused by the clutch plate issue? The following are specific introductions about the clutch plate: Introduction: The clutch plate is a composite material that mainly functions through friction and also meets structural performance requirements. Automotive friction materials are primarily used to manufacture brake friction plates and clutch plates. These friction materials mainly use asbestos-based friction materials. With increasing environmental and safety requirements, semi-metallic friction materials, composite fiber friction materials, and ceramic fiber friction materials have gradually emerged. Wear resistance: Since friction materials are mainly used to manufacture parts of the braking system and transmission system in automobiles, they are required to have sufficiently high and stable friction coefficients as well as good wear resistance.

7

4

Share

How to Use the Function of Rearview Camera?

How to Check if a Car is New?

Under which company is NIO affiliated?

How to Determine the Stopping Point for Hill Start in Subject 2?

Can Nighttime Surveillance Capture the Inside of a Car?

Are motorcycles prohibited on Shandong Expressways?

Is the inability to shift gears caused by the clutch plate issue?

What are the reasons for the non-functioning of the automatic start-stop in the Sagitar?

Does a 15-year-old vehicle need to undergo on-site inspection for the 2021 annual check?

Should You Use Internal or External Air Circulation When Turning on the Car Heater?

What is the method to prevent crossing the line at a curved exit?