···
Log in / Register

How to Use the Fuel-Saving Gas Card?

4 Answers
McGage
07/29/25 5:24pm
First, insert the gas card and enter the password. When the display shows the card balance, select the "Amount" button. The vehicle owner should pick up the fuel nozzle, lift the nozzle holder, insert the nozzle into the vehicle's fuel tank, and squeeze the nozzle trigger to start refueling. Release the nozzle trigger, ensure the nozzle position is reset, lower the nozzle holder, hang up the nozzle, and the gas card will automatically eject.
Was this review help?
2
2
Share
VanDaniela
08/14/25 8:16am
I previously used the Fuel Saver gas card, and the whole process was quite straightforward. First, you need to go to a gas station or a partnered store to purchase a card, choose a denomination like 100 or 300 yuan, and pay for it. After purchasing, remember to activate the card, usually by scanning the QR code on the card with a mobile app to bind it, and then setting up an account and security password. When refueling, drive into a supported gas station like Sinopec or PetroChina, hand the card to the attendant or insert it into the self-service fuel pump's card slot, and the system will automatically recognize and deduct the payment, while also earning fuel points. After each refueling, the app will display the money saved and the remaining points balance. Accumulating a certain number of points can be exchanged for free car washes or small gifts. It's recommended to regularly check the app for updated promotions, and also inspect the card's status during car maintenance. The entire process is convenient and hassle-free, and using it a few times a month can really save a lot on fuel costs, especially for someone like me who frequently travels long distances. Keep the card clean and avoid getting it wet to prevent demagnetization.
Was this review help?
10
1
Share
Expand All
JohnRose
10/13/25 6:46am
As someone who has been driving for decades and loves researching fuel-saving techniques, this fuel card can be a great help. When purchasing the card, always use official channels to avoid counterfeit cards, and don't fill the recharge amount to the maximum—leave some room to prevent one-time deductions. The key to using it lies in choosing the right moment during refueling, such as swiping the card to confirm the amount after inserting the fuel nozzle, as the machine will automatically apply discounts and stack points. The Sheng You Bao card has the advantage of automatically calculating the optimal refueling amount to reduce evaporation waste, and the app also pushes fuel-saving driving tips, like maintaining steady speeds and braking less, which work even better when combined. Don't rush to use accumulated fuel points—wait for promotions to exchange them for bigger discounts. Don't throw the card away after use; it can be recharged online and reused. Remember to regularly check the app statements after driving to avoid overcharges, and with gentle throttle habits, saving hundreds on fuel per month isn't hard. For security, keep the card safe and don't expose the password to prevent fraud. Long-term use is both eco-friendly and cost-effective.
Was this review help?
5
2
Share
Expand All
MacBrooke
11/26/25 7:45am
Technically speaking, this fuel card operates through the coordination of built-in chips and backend systems. After obtaining the card, you first bind your mobile number to verify your identity and ensure secure activation. When in use, the card information is recognized by the gas station equipment, connecting to the cloud to calculate real-time fuel deductions and add points. The points system typically offers fixed points per liter of fuel, redeemable for coupons or merchandise. The card employs encryption to prevent hacking and data tampering, ensuring accuracy. The charging card mechanism allows online checking of transaction history to monitor anomalies. The APP integrates maps to locate the nearest partner stations, saving time and fuel. During operation, inserting the card for a few seconds completes the process automatically, reducing human errors and improving efficiency, while being compatible with most mainstream gas station brands. It is recommended to keep the APP updated to fix vulnerabilities, optimize smoothness, and extend the card's lifespan.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

Is it necessary to apply for ETC?

It is necessary to install ETC. According to the State Council's regulations, vehicles without ETC will not enjoy toll discounts starting from 2020, and in the future, only one manual lane will be retained at highway toll stations, requiring manual payment. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated first. During free holiday periods, ETC users can still pass through highways without being charged when using ETC lanes. ETC Charging Principle: Highways have one or more ETC lanes. Through microwave short-range communication between the vehicle's electronic tag (installed on the windshield) and the microwave antenna in the ETC lane, combined with computer networking technology for backend bank settlements, vehicles can pass through toll stations without stopping to pay road or bridge fees. This operates on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions since vehicles don’t need to stop at toll booths. Cost and wear reduction: Saves money by minimizing frequent starts and brakes, reducing vehicle wear and fuel consumption. Users also enjoy a 5% discount on toll fees. Improved efficiency: ETC lanes can theoretically increase traffic flow efficiency by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation smart cards, with a significant increase in ETC adoption rates." It also set a target of "50% ETC usage rate for passenger vehicles by 2020" in the main indicators for comprehensive transportation development. Future possibilities: Beyond improving ETC installation convenience and passenger vehicle adoption rates, future efforts will promote ETC use for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and smart transportation developments. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC usage.
8
0
Share

What is CVVL technology and its principle?

CVVL stands for Continuous Variable Valve Lift technology, which is considered a high-precision and cutting-edge technology in the industry. CVVL technology offers numerous practical benefits to consumers, with the primary advantage being reduced fuel consumption. Below is the principle of variable valve lift technology: 1. In traditional engines, the valve lift of conventional valve train mechanisms is fixed, whereas the operating conditions of the engine require different valve lifts. High-speed, high-load conditions demand a large valve lift and long duration, while low-speed, low-load conditions require a small valve lift and short duration. However, traditional valve train mechanisms can only optimize the engine for a specific operating condition and cannot meet all conditions. CVVL technology can adjust the valve lift, enabling the engine to meet the required valve lift in both high-speed and low-speed ranges, thereby improving high-speed power and low-speed torque. 2. The CVVL mechanism controls the lift via an eccentric shaft, an adjusting arm, and a connecting arm. First, the CVVL controller precisely controls the CVVL motor through a program. The CVVL motor drives the eccentric shaft to rotate via a worm gear and worm mechanism. When the eccentric shaft rotates clockwise, the adjusting arm pushes the intermediate rocker arm to move leftward, reducing the lift. Conversely, when the eccentric shaft rotates counterclockwise, the adjusting arm pushes the intermediate rocker arm to move rightward, increasing the lift.
1
0
Share

How to Deal with Insufficient Tire Pressure?

Solutions for insufficient tire pressure: 1. Visually inspect whether the tire can continue to drive. If it can, go to the nearest tire repair shop to inflate the tire pressure. 2. If it cannot drive, park the car and call for rescue to wait for help. Hazards of low tire pressure: 1. The friction coefficient with the road surface will increase, leading to higher fuel consumption. 2. It causes unfavorable factors for driving safety, such as a heavy steering wheel and easy deviation. 3. It increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling. 4. It reduces the function of the cord and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage to the bead area and abnormal wear. 5. The friction between the tire and the ground increases exponentially, the tire temperature rises sharply, the tire becomes soft, and the strength drops sharply. High-speed driving may cause a tire blowout. 6. Low tire pressure will increase the deformation of the tire body, easily causing cracks on the tire side, and generate flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, cord breakage, and also increasing the tire's contact area with the ground, accelerating shoulder wear.
7
5
Share

From which year did China National V vehicles start?

China National V emission standard vehicles started production in 2012, and the fifth stage national motor vehicle emission standard was implemented nationwide from January 1, 2017. The emission control level of China National V standard is equivalent to the European Euro 5 emission standard currently in force. Below is an introduction to China National V: 1. China National V vehicles refer to those that comply with the 'National Fifth Stage Motor Vehicle Pollutant Emission Standard'. The motor vehicle pollutant emission standard was established to implement environmental protection laws, reduce and prevent vehicle exhaust pollution to the environment, protect the ecological environment, and ensure human health. 2. The European Union has been implementing this standard since 2009, which imposes stricter limits on motor vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles. From China National I to China National IV, each upgrade in the standard reduces single-vehicle pollution by 30% to 50%. 3. Shortly after the implementation of China National V standard, China National VI standard was quickly put on the agenda. Many regions implemented China National VI standard ahead of schedule. Taking Guangdong Province as an example, from July 1, 2019, newly registered vehicles in Guangdong must comply with China National VI emission standard. At that time, only China National VI standard new vehicles were available on the market, and vehicles transferred from other regions must also meet the China National VI standard.
2
5
Share

Will there be any consequences if I abandon my impounded car?

The impacts of abandoning an impounded car are detailed as follows: 1. How to handle an impounded car you don't want: There will be issues, and it is recommended to actively address the relevant traffic violations. Failure to handle traffic violations on time will most directly result in late fees. 2. Consequences of abandoning an impounded car: If the impounded vehicle is not dealt with, it will also lead to a ban on all driver's license services, meaning the license cannot be renewed, and after one year of expiration, the driver's license will be revoked. 3. Consequences of not handling traffic violations on time: The most direct consequence of not handling traffic violations on time is the imposition of late fees. Generally, late fees start to accrue from the 16th day after the violation. The late fee is 3% of the fine per day, with a cap not exceeding the original fine. For example, for a 200 yuan fine, the late fee will not exceed 200 yuan. If you continue to accumulate violations without handling the previous ones, once checked by traffic police, you may face the suspension of your driver's license or even the impoundment of your vehicle. Another important point is that if the vehicle is involved in an accident or suffers damage, and there are outstanding violations, the insurance company may have grounds to refuse compensation.
18
2
Share

How to Solve Fogging on the Outside of Car Windows on Rainy Days?

Fogging on the rear window after rain can be addressed using the following methods: 1. Air Conditioning Cooling for Defogging: The main causes of window fogging are low temperature and high humidity. Using the air conditioning cooling function can remove fog from the front windshield. However, if the humidity inside the car is too high, the effect may not be very noticeable. In such cases, slightly opening the windows can quickly reduce interior humidity. 2. Window Ventilation for Defogging: Opening the windows allows cold and hot air to circulate. If the fogging is not severe, slightly opening the side windows can create air convection inside the car, gradually equalizing the interior temperature with the outside temperature and dispersing the fog. The advantage is that it achieves the same effect as using the air conditioning without increasing fuel consumption. During extreme cold or rainy conditions, intermittently opening and closing the windows is recommended. This method is not suitable for severe fogging. 3. Anti-Fog Spray: Applying glass anti-fog spray forms a transparent hydrophobic ion film on the glass surface, preventing water droplets and fog from condensing. 4. Anti-Fog Cloth: When fogging occurs, wiping the windows with an anti-fog cloth can prevent further fogging, achieving the same effect as anti-fog spray. 5. Detergent-Based Anti-Fog Solutions: Mixing dish soap with water in a ratio of approximately 1:10 and applying it to the inside of the front and rear windshields with a cotton swab or soft cloth can prevent fogging. Alternatively, mixing household shampoo or body wash with water in a similar ratio and spraying it on the windows before driving can also prevent fogging.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.