How to Use the Four-Wheel Drive in the Highlander?

What does it mean when the motorcycle warning light is on?

Motorcycle warning light elimination method: It can only be cleared using professional diagnostic equipment, and cannot be resolved by the owner themselves. Reasons for motorcycle warning light illumination: Poor regulator connection: Poor contact in the wiring from the generator excitation winding terminal through the brushes to the regulator; Poor battery connection: Before riding the motorcycle, turn on the ignition switch to start the engine, at which point the charging indicator light serves as a power indicator; After the engine starts and enters idle operation, the charging indicator light should turn off or flicker slightly, indicating the motorcycle's charging system is functioning normally. If the charging indicator light remains on at this stage, it signifies a fault in the charging system that should be addressed immediately.

1

4

Share

How to Use Car High Beams?

Car high beams, also known as headlights, are typically used during nighttime driving in rural areas or on poorly lit roads. High beams are extremely bright and can be glaring to pedestrians and oncoming vehicles. Misuse of high beams can lead to dangerous situations, so it's essential to use them correctly. The proper usage of high beams is as follows: 1. Know when to turn on high beams: Do not use high beams on roads with streetlights or adequate lighting. 2. Decide whether to use high beams based on road conditions: If driving on well-lit urban roads, even late at night, high beams are unnecessary. However, on mountain roads or rural areas, turn on high beams after dusk to prevent accidents. 3. Turn off high beams when approaching another vehicle: Vehicles using high beams should switch to low beams at least 150 meters before meeting an oncoming car. 4. Alternate between high and low beams: On poorly lit roads with frequent oncoming traffic, flashing high and low beams alternately can alert other drivers without causing glare. 5. Avoid using high beams in foggy conditions: Fog reduces air transparency, causing light to scatter. High beams won't improve visibility but will instead impair the vision of oncoming drivers, increasing danger. 6. Adjust high beam height appropriately: When using high beams, lower the beam angle to avoid blinding drivers of smaller oncoming vehicles.

5

2

Share

What does tripa mean?

It refers to the current trip mileage. The 'trip' on the car dashboard represents the trip mileage, which can be used to record the kilometers traveled for each trip. The one on its left represents the total mileage of the vehicle. tripA/B specifically refers to the distance from point A to point B. In the tripa state, pressing the cylindrical rod on the dashboard briefly will switch to the trip-b state, and pressing the rod again will return to the initial state, which displays the total mileage. Below is relevant information: Methods to identify odometer tampering: Check 4S shop records: If a car has been regularly maintained at a 4S shop, you can inquire about relevant records there to check the mileage history. Inspect interior details: Examine the vehicle's interior, paying attention to details such as the steering wheel, storage box switches, accelerator and brake pedals, and gear shift handle. The wear level can provide a rough estimate of usage. Tires: The wear condition of the tires can also help roughly determine the actual mileage of the vehicle. The difference between tires that have traveled 3,000 kilometers and those that have traveled 30,000 kilometers is obvious.

17

1

Share

What is the difference between CVT and AT transmissions?

AT and CVT transmissions differ in the following aspects: Principle: The AT operates by using a torque converter whose automatic speed and torque variation range is insufficient, hence several rows of planetary gears are connected in series behind the turbine to enhance efficiency. The hydraulic control system automatically operates the planetary gears in response to changes in engine operation, thereby achieving automatic speed and torque variation. The CVT's drive pulley has a unique structure, divided into movable left and right halves that can move closer together or apart. The conical discs can tighten or expand under hydraulic thrust, squeezing the steel belt to adjust the width of the V-shaped groove. When the conical discs move inward and tighten, the steel belt is pushed outward from the center, and vice versa. This changes the diameter of the disc driven by the steel belt, altering the gear ratio. Usage: The AT does not require a clutch for shifting, has fewer gear changes with significant variation, and provides smooth engagement, making it easy to operate. It offers convenience for the driver and comfort for passengers. The CVT lacks the transmission gears found in conventional automatic transmissions, eliminating the gear-shifting process and the associated jerky sensation. As a result, the CVT delivers linear power output, ensuring a very smooth driving experience in practice.

2

5

Share

How Long Can a Vehicle Annual Inspection Be Delayed at the Latest?

Vehicle annual inspections cannot be postponed; even a one-day delay will result in penalties. Vehicle inspections can be conducted up to three months in advance but cannot be delayed. Failing to complete the inspection on time is considered overdue, and if caught by traffic police, it may result in a deduction of three points and a fine of up to 200 yuan. Annual inspections can only be conducted early, not late. Driving a vehicle with an expired inspection is illegal. The contents of a vehicle annual inspection include: 1. Checking whether the engine, chassis, body, and related equipment are clean, complete, and functional, whether the paint is uniform and aesthetically pleasing, whether major components have been replaced, and whether they match the initial inspection records. 2. Verifying whether the vehicle's braking, steering, lighting, exhaust, and other safety performance meet the requirements of the "Technical Conditions for Safe Operation of Motor Vehicles." 3. Checking whether the vehicle has been modified or altered, whether the driving license, license plate, and vehicle records match the actual condition of the vehicle, and whether any changes have undergone approval and modification procedures. 4. Inspecting whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether they need replacement. 5. For large vehicles, verifying whether the unit name or the name of the street, township, or town where the vehicle is registered, as well as the maximum seating capacity in the driver's cabin, are correctly displayed in Chinese imitation Song font on both sides of the doors as required.

10

4

Share

How many production bases does Changan Automobile have?

Changan Automobile has eight major production bases located in Chongqing, Heilongjiang, Hebei, Guangdong, Jiangxi, Jiangsu, Anhui, and Zhejiang. Currently, the main production base is in Chongqing. Changan Automobile operates several subsidiaries, including "Changan Automobile Co., Ltd." and "Changan Ford Automobile Co., Ltd." Changan Automobile has witnessed the development of China's automotive industry and has made indelible contributions to it. Below is relevant information: Background of Changan Automobile: Changan Automobile traces its origins to the Shanghai Arsenal founded by Li Hongzhang in 1862. It has gone through the late Qing Dynasty, the Republic of China, and the People's Republic of China, making it a military vehicle manufacturer with over a century of history. In 1957, Changan replicated the American "Willys" jeep and produced China's first military off-road vehicle, the Changjiang 46. R&D Layout: Changan Automobile adheres to innovation-driven development, building world-class R&D capabilities. It has established a global collaborative R&D network with "six countries and nine locations," including Chongqing, Beijing, Hebei, Hefei, Turin (Italy), Yokohama (Japan), Birmingham (UK), Detroit (USA), and Munich (Germany), each focusing on different aspects of R&D.

2

1

Share

How to Use the Four-Wheel Drive in the Highlander?

What does it mean when the motorcycle warning light is on?

How to Use Car High Beams?

What does tripa mean?

What is the difference between CVT and AT transmissions?

How Long Can a Vehicle Annual Inspection Be Delayed at the Latest?

How many production bases does Changan Automobile have?

What Are the Reasons for a Car's Lack of Power When Accelerating?

How to Deal with Cement on a Car?

Is it okay to use 92-octane gasoline for the Tharu?

Can You Still Drive a Car When the Oil Change is Due?