How to use the foot brake on a Nissan Teana?

What engine does the Bisu M3 have?

Bisu M3 is equipped with a 1.5-liter naturally aspirated engine, which delivers 114 horsepower and a maximum torque of 147 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque between 3600 to 4400 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. The Bisu M3 is an MPV model under the Bisu brand, measuring 4760 mm in length, 1810 mm in width, 1751 mm in height, with a wheelbase of 2800 mm. It is a five-door, seven-seat MPV. The front suspension of the Bisu M3 uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.

14

5

Share

Is the BYD Han a hybrid vehicle?

BYD Han offers both hybrid and pure electric versions. The BYD Han is a mid-to-large luxury sedan under the BYD brand, with a wheelbase of 2920 mm, length of 4960 mm, width of 1910 mm, and height of 1495 mm. The hybrid version of the BYD Han is a single-motor model, equipped with a 2.0-liter turbocharged engine that delivers a maximum power of 141 kW. This engine features direct injection technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 180 kW and a maximum torque of 330 Nm.

7

4

Share

Can the BYD Han be charged at home?

The BYD Han can be charged at home as it supports 220V voltage charging, although the charging speed will be slower. The BYD Han is a mid-to-large-sized sedan under the BYD brand, with a wheelbase of 2920 mm, length of 4980 mm, width of 1910 mm, and height of 1495 mm. The BYD Han is available in both pure electric and hybrid versions. The pure electric version comes in front-wheel drive and all-wheel drive options, while the hybrid version is all-wheel drive. The 2.0-liter turbocharged engine in the BYD Han delivers 192 horsepower and a maximum torque of 320 Nm. This engine features direct fuel injection technology, uses an aluminum alloy cylinder head and block, and is paired with a 6-speed dual-clutch transmission.

17

4

Share

Where is the Transmission Valve Body Located?

The transmission valve body is located above the transmission oil pan, and it becomes visible upon removing the oil pan. Only automatic transmissions have a valve body; manual transmissions do not. The valve body serves as the control mechanism of the transmission. Most transmissions use solenoid valves to control gear shifting. There are three common types of automatic transmissions in vehicles: dual-clutch transmission (DCT), automatic transmission (AT), and continuously variable transmission (CVT). A dual-clutch transmission essentially adds an extra set of clutches and a gear-shift control mechanism compared to a manual transmission. One clutch in this setup controls odd-numbered gears, while the other manages even-numbered gears. CVT transmissions offer superior shift smoothness, whereas AT transmissions are structurally complex yet technologically mature automatic transmissions.

2

4

Share

How to Deal with Transmission Overheating Alarm?

When the transmission overheating alarm is triggered, immediately pull over to a safe location for inspection to avoid potential safety hazards. Transmission overheating can cause issues such as abnormal gear shifting, damage to the transmission, and in severe cases, complete failure of the transmission. Upon encountering a transmission overheating alarm, check whether the radiator fan is functioning properly, whether there is sufficient transmission fluid, and whether the transmission cooler is working correctly. Aggressive driving can also lead to excessive load on the transmission, resulting in abnormal temperature increases. In such cases, simply turn off the engine and allow the transmission to cool down naturally. It is advisable to drive smoothly and avoid aggressive driving, as it not only increases safety risks but also places additional stress on the engine and transmission, potentially causing damage and reducing their lifespan.

17

4

Share

Does the Transmission Need Filter Replacement?

Transmission oil filters do require replacement. When changing the transmission oil, the transmission oil filter should be replaced simultaneously. Transmission oil serves to lubricate and cool within the transmission system, while automatic transmission fluid also functions in power transmission. Without transmission oil, the transmission cannot operate properly. Prolonged failure to replace the transmission oil will cause it to become increasingly viscous, impairing heat dissipation and leading to excessive temperatures. Over time, this will adversely affect the transmission's service life. It is essential to use specialized OEM transmission oil exclusively; mixing different types is prohibited. Overfilling will increase resistance during operation, accelerating component wear, whereas insufficient oil levels may result in sluggish gear shifting.

18

0

Share

How to use the foot brake on a Nissan Teana?

What engine does the Bisu M3 have?

Is the BYD Han a hybrid vehicle?

Can the BYD Han be charged at home?

Where is the Transmission Valve Body Located?

How to Deal with Transmission Overheating Alarm?

Does the Transmission Need Filter Replacement?

What is the Black Warrior car?

Where is Hongqi (Red Flag) cars produced?

What are the body dimensions of the Honda XR-V?

What are the methods to remove white paint marks from a black car?