How to use the electronic gear lever of the Bestune T77?

How many years of driving experience is required to upgrade from C1 to A2?

You cannot directly upgrade from C1 to A2. If you already hold a C1 driver's license, the fastest way to obtain an A2 license is to upgrade to a B1 or B2 license after holding the C1 license for one year. After obtaining the B1 or B2 license, you need three years of professional driving experience before you can apply for the A2 license. Therefore, upgrading from C1 to A2 requires at least four years. There is also a second method for upgrading, which is to directly obtain a B2 driver's license. After holding the B2 license for three years, you can then upgrade to the A2 license. This method is faster, but it does not involve upgrading from a C1 license. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123) of the People's Republic of China, the following conditions must be met for upgrading a driver's license: Article 14: If you already hold a motor vehicle driving license and wish to apply for an additional permitted vehicle type, you must not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before the application. For applications to add medium-sized buses, tractors, or large buses to the permitted vehicle types, the following additional conditions must be met: To apply for adding medium-sized buses to the permitted vehicle types, you must have held a license for urban buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles for at least three years and must not have accumulated 12 penalty points in the most recent three consecutive scoring cycles before the application. To apply for adding tractors to the permitted vehicle types, you must have held a license for medium-sized buses or large trucks for at least three years, or have held a license for large buses for at least one year, and must not have accumulated 12 penalty points in the most recent three consecutive scoring cycles before the application. To apply for adding large buses to the permitted vehicle types, you must have held a license for medium-sized buses, urban buses, or large trucks for at least five years, or have held a license for tractors for at least two years, and must not have accumulated 12 penalty points in the most recent five consecutive scoring cycles before the application. In temporary residence areas, you can apply to add the following vehicle types to your license: small cars, small automatic transmission cars, low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles. Article 15: The following circumstances disqualify you from applying for large buses, tractors, medium-sized buses, or large trucks as permitted vehicle types: Being responsible for a traffic accident resulting in death with equal or greater liability; Driving a motor vehicle under the influence of alcohol; Having your motor vehicle driving license revoked or rescinded within the past ten years. According to the "Permitted Vehicle Types and Codes" (Ministry of Public Security Order No. 139) of the People's Republic of China: The A1 permitted vehicle type is large buses, which allows driving large passenger vehicles, and also permits driving A3, B1, B2, C1, C2, C3, C4, and M vehicle types. According to the "Permitted Vehicle Types and Codes" (Ministry of Public Security Order No. 139) of the People's Republic of China: The A2 permitted vehicle type is tractors, which allows driving heavy and medium-sized full trailers and semi-trailer vehicle trains, and also permits driving B1, B2, C1, C2, C3, C4, and M vehicle types.

5

1

Share

What Causes Motorcycle Engine Overheating?

Motorcycle engine overheating generally occurs due to: 1. Prolonged riding in hot weather with excessive vehicle load; 2. Some inherent issues with the vehicle itself. Below are the specific impacts of engine overheating: 1. Reduced engine power: When operating in temperatures above 35°C (95°F), with tailwinds, or under heavy load at low speeds, engine overheating becomes more severe, further decreasing the engine's air charging efficiency. This results in less fresh air-fuel mixture entering the cylinders, lowering the mean effective pressure and reducing engine power output. 2. Increased fuel consumption: High engine temperatures can cause lubricating oil entering the cylinders to form carbon deposits under high-temperature oxygen-deficient conditions. These deposits accumulate on piston crowns, combustion chamber walls, valve heads, and spark plugs, creating hot spots that lead to abnormal combustion (pre-ignition). This can cause deformation of engine blocks and cylinder heads, potentially leading to cracks or warping, as well as cylinder head gasket failure. The resulting compression loss at the end of the compression stroke increases fuel consumption. 3. Accelerated component wear: High temperatures cause lubricating oil to oxidize and degrade, forming sludge and deposits that adhere to piston rings, cylinder walls, and other friction surfaces, reducing heat transfer efficiency. The oil's viscosity decreases, oil pressure drops, and lubricating properties deteriorate. The oil film on cylinder walls weakens under impact loads, significantly accelerating component wear.

14

3

Share

Why does the battery not charge fully and get hot?

The reasons why the battery does not charge fully and gets hot are as follows: 1. Battery aging, battery water loss, battery plate sulfation; 2. Damaged wiring; 3. Poor fuse contact; 4. Poor internal plug contact; 5. Damaged charger; 6. Circuit board failure. Below are some battery maintenance tips: 1. Avoid not turning off the air conditioning when the engine is off: The air conditioning consumes a lot of power. Some drivers are accustomed to not turning off the air conditioning when the engine is off, which causes the air conditioning to automatically start the next time the vehicle is started. This leads to an instantaneous high power load on the vehicle, which can damage the battery over time. 2. Regularly wipe the battery: Use a damp cloth to periodically clean the exterior of the battery, removing dust, grease, white powder, and other contaminants that can cause leakage from the panel and the positive and negative terminals. Regular cleaning prevents excessive buildup of white acid corrosion powder on the terminals and extends the battery's lifespan. Special grease can be applied to the terminals to protect the battery. 3. Prevent battery discharge: To prevent the battery from discharging, be especially careful not to use the car's CD player, cigarette lighter, or other charging devices for extended periods while the engine is off, as this consumes a significant amount of battery current. Discharging the battery easily leads to battery damage.

14

2

Share

Is It Normal for the 2020 Toyota RAV4 to Shake When Braking in D Gear?

D gear braking causing body shake is a normal phenomenon. When in D gear, the vehicle is in a power-connected state, with engine power transmitted to the transmission, which then sends it to the wheels via the driveshaft. At this point, the vehicle should be moving forward, but pressing the brake means the transmission is constantly under tension, resulting in body shake. Vehicles with better noise control and vibration isolation may still experience shake, but it is mitigated before reaching the cabin. Additional relevant information is as follows: Note 1: However, if the shaking is abnormal, it could be caused by damaged engine mounts. The engine mounts, usually made of rubber, connect the engine to the frame and help absorb some of the engine's vibrations. Without these mounts, the engine's vibrations would directly transfer to the body, significantly affecting ride comfort. Over time, rubber components can harden due to aging, causing the engine's vibrations to be directly transmitted to the body. Note 2: It is recommended that drivers avoid holding the brake in D gear for extended periods, as this can damage the transmission. When waiting at a red light, besides avoiding prolonged D gear braking, do not shift into P gear either, as a rear-end collision could also severely damage the transmission.

8

1

Share

Can You Still Drive When the 'Check Engine System' Warning Appears?

When the car displays a 'Check Engine System' warning, it should not be driven further. This warning indicates that there is an issue with the vehicle's engine, and immediate repairs are necessary. The engine's five major systems consist of the fuel supply system, starting system, cooling system, lubrication system, and ignition system. Repair methods for this warning light: The engine should be turned off, and a specialized diagnostic tool must be connected to read the vehicle's fault codes. The specific issue with the vehicle will be displayed on the diagnostic tool. Based on the identified problem, the vehicle can then be repaired quickly and accurately. Engine maintenance methods: The engine is the core component of a car, and its routine maintenance involves changing the engine oil and the three filters. The three filters refer to the air filter, oil filter, and fuel filter. Other maintenance items should be performed according to the vehicle's actual usage or the owner's manual to effectively maintain the vehicle and prolong the engine's lifespan.

19

1

Share

Which gear should an automatic transmission be in for long-term parking?

If parking for an extended period, it is best to engage the P (Park) gear. The P gear is the parking gear, where the transmission's parking mechanism locks to prevent the vehicle from rolling. Alternatively, the N (Neutral) gear can also be used, but since N is the neutral gear where the transmission is unloaded, the vehicle can still move. Therefore, it is essential to engage the parking brake (handbrake) to prevent rolling. Below is an introduction to the gears of an automatic transmission car: 1. L (Low) Gear: The low gear limits speed, maintaining high RPM and low gear when climbing hills. 2. S (Sport) Gear: This is the sport mode, where the transmission can shift freely but delays shifting to keep the engine at high RPM for extended periods, allowing the car to move at low gear and high RPM for longer durations. 3. D (Drive) Gear: The forward gear used when driving the car forward. 4. N (Neutral) Gear: The neutral gear used during brief stops. 5. P (Park) Gear: The parking gear used when stopping the car; engaging P gear stops the vehicle and prevents rolling. 6. R (Reverse) Gear: The reverse gear used when backing up. However, R gear should only be engaged when the vehicle is completely stopped. Engaging R gear while the car is moving slowly can cause severe damage to the transmission.

9

3

Share

How to use the electronic gear lever of the Bestune T77?

How many years of driving experience is required to upgrade from C1 to A2?

What Causes Motorcycle Engine Overheating?

Why does the battery not charge fully and get hot?

Is It Normal for the 2020 Toyota RAV4 to Shake When Braking in D Gear?

Can You Still Drive When the 'Check Engine System' Warning Appears?

Which gear should an automatic transmission be in for long-term parking?

Is the Left-Side Overtaking Always Fully at Fault?

Why Can't You Say 'Fill It Up' When Refueling?

How to Determine if an Engine Has Seized?

What causes the JMC SVS light to come on and diesel power loss?