How to Use the Dash Cam Provided by Chevrolet?

Which is More Practical: Adaptive Cruise Control or Cruise Control?

ACC (Adaptive Cruise Control) can better alleviate driver fatigue to a certain extent and is more intelligent. Here is a relevant introduction to adaptive cruise control and cruise control: 1. Cruise Control: CCS (Cruise Control System) consists of four parts: command switch, vehicle speed sensor, electronic throttle actuator, and ECU. However, this function generally has a minimum speed limit set by vehicles, meaning the onboard computer will maintain a "continuous and stable" speed only when a certain speed is reached. Apart from this, operations like steering and braking still require the driver's control. 2. Adaptive Cruise Control: ACC can be considered an upgraded version of cruise control. During driving, the distance sensor (radar) installed at the front of the vehicle continuously scans the road ahead, while the wheel speed sensor collects speed signals. When the distance to the vehicle in front becomes too small, the ACC control unit can coordinate with the anti-lock braking system and engine control system to apply appropriate braking and reduce engine output power, thereby maintaining a safe distance from the vehicle ahead.

6

0

Share

How to reset the tire pressure light on a 2020 Sagitar?

Method to reset the tire pressure light on a 2020 Sagitar: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the pressure to avoid over-inflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as the tire temperature rises during driving, affecting the pressure. Check the valve stem. If the valve stem and valve core do not fit smoothly, with any protrusions, depressions, or other defects, it may hinder inflation and pressure measurement. Pay attention to cleanliness when inflating. The air being pumped in should not contain moisture or oil to prevent damage to the inner tube rubber. Do not exceed the standard pressure too much during inflation and then release air, nor should you over-inflate due to prolonged inability to inflate while out. Exceeding the standard pressure too much can cause excessive stretching of the cords, reducing their strength and affecting the tire's lifespan.

10

1

Share

How to Check Driving License Points and Fines?

Others' driving licenses can only be queried by the traffic authorities of public security organs, and no other units or individuals have this right. No one can check someone else's driving license point deduction status online. If it is your own driving license, you can bring your ID card and driving license to the local traffic police team vehicle management office for inquiry, or you can directly check it on WeChat. Below is relevant information about driving licenses: 1. Definition: In China, a driving license is defined as a legal document issued by the management department to individuals who are legally allowed to learn to drive motor vehicles, have studied and mastered traffic regulations and driving skills, and passed the examination, permitting them to drive certain types of motor vehicles. 2. Exam Preparation: Driving license examinees can use simulated driving license test software on mobile or computer devices, such as the 'Driving Test Guide,' to study traffic regulations and related driving license knowledge.

2

5

Share

Should You Use One Foot or Two Feet for an Automatic Transmission?

When driving an automatic transmission car, you should use one foot. Below is an introduction to the differences between learning to drive an automatic transmission and a manual transmission: 1. Different permitted vehicle types: A manual transmission license permits driving small cars, while an automatic transmission license permits driving small automatic transmission cars. 2. Different permitted vehicles: A manual transmission license allows driving small and micro passenger cars, as well as light and micro trucks, and light and micro special-purpose vehicles, while an automatic transmission license permits driving small and micro automatic transmission passenger cars and light and micro automatic transmission trucks. 3. Different additional permitted vehicle types: Holding a manual transmission license allows driving automatic transmission cars, whereas holding an automatic transmission license does not permit driving manual transmission cars.

19

5

Share

How to Use the Two P Buttons in an Automatic Transmission?

How to use the two P buttons in an automatic transmission: 1. Press the brake pedal to stop the vehicle; 2. Shift the gear lever to N (Neutral) position; 3. Release the brake and engage the electronic parking brake; 4. Turn off the engine, shift the gear lever to P (Park) position, and the parking process is complete. The meanings of the letters in an automatic transmission car are: P stands for Park, R for Reverse, N for Neutral, D for Drive, L for Low gear, S for Sport mode, and OD for Overdrive. Precautions for driving an automatic transmission car include: 1. Do not shift into P while driving; 2. After driving, you must turn off the engine and shift into P to remove the key; 3. Do not shift into N to coast while driving; 4. When starting the vehicle in P or N, shift the gear lever out of P while pressing the brake, turn on the power while pressing the brake, shift to N, and after ignition, shift to D to move forward directly; 5. When switching between N, D, and L gears, there is no need to press the shift button. When shifting from L to lower restricted gears, press the shift button, but shifting from lower to higher gears does not require pressing the shift button.

14

5

Share

Should Car Brake Pads Be Replaced Together for Front and Rear?

Car front and rear brake pads do not need to be replaced together, as they have different replacement cycles. Compared to front brake pads, rear brake pads have a longer service life. Under normal driving conditions, front brake pads typically require replacement every 30,000-50,000 kilometers, while rear brake pads can last about 60,000-100,000 kilometers before needing replacement. Introduction to Brake Pads: 1. Car brake pads, also known as brake linings, refer to the friction materials fixed on the brake drum or brake disc rotating with the wheel. The friction lining and friction block bear external pressure to generate friction, thereby decelerating the vehicle. 2. Car brake pads are generally composed of steel plates, adhesive heat insulation layers, and friction blocks.

12

3

Share

How to Use the Dash Cam Provided by Chevrolet?

Which is More Practical: Adaptive Cruise Control or Cruise Control?

How to reset the tire pressure light on a 2020 Sagitar?

How to Check Driving License Points and Fines?

Should You Use One Foot or Two Feet for an Automatic Transmission?

How to Use the Two P Buttons in an Automatic Transmission?

Should Car Brake Pads Be Replaced Together for Front and Rear?

Is It Necessary to Install Seat Ventilation?

Benefits of High Octane Rating?

What is the reason why an automatic transmission car cannot start in P gear?

How to Reset an Automatic Transmission to Factory Settings?