How to Use the CS85 Electronic Gear Lever?

Can You Stick Your Head Out During Curve Driving?

Curve driving does not allow sticking your head out, otherwise it will result in failure. During the Subject 2 driving test, candidates are not permitted to lean their heads out of the window to check vehicle operations; they must rely solely on rearview mirrors for observation. According to test regulations, not only is leaning out prohibited, but no part of the body may extend outside the vehicle during any movement test. Violation will result in failure. The Subject 2 driving test consists of five tasks: reverse parking into a garage, hill start, parallel parking, curve driving, and right-angle turns. Among these, reverse parking and parallel parking require controlling the vehicle by observing the rearview mirrors. Relevant officials have also stated that under the new traffic regulations, not only is leaning out prohibited, but no part of the body may extend outside the vehicle during any movement test. Violation will result in failure. Tips for curve driving: When entering an S-curve, pay attention to the position of the front of the car. When the midpoint of the front touches the right yellow line, gradually steer to the left. Start with half a turn, keeping the left corner of the front aligned with the yellow line. When the left corner is about to cross the yellow line, steer a bit more. If the left corner fails to touch the yellow line, slightly adjust the steering back. When the front of the car is centered at the curve junction, quickly straighten the steering, usually requiring about one full turn. When the midpoint of the front touches the left yellow line, steer half a turn to the right, then make minor adjustments, following the curve and continuously adjusting the steering wheel. While turning, use peripheral vision to glance at the left and right rearview mirrors to monitor the distance between the rear wheels and the boundary lines, making appropriate adjustments to avoid crossing the lines.

9

4

Share

What is ECO mode?

ECO refers to the economic driving mode of a car. ECO is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economic mode has been activated. The Eco mode can be categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars utilize the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can activate the Eco mode. However, it is unnecessary to enable the Eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of the Eco mode but also negatively impact the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function under these conditions either.

20

2

Share

How to Set the Three Modes of Changan UNIT?

You can switch modes by entering the function menu on the dashboard. In NORMAL driving mode, the power output is neither sluggish nor fuel-consuming. The power response is slightly delayed, and the power output feels constrained, which may frustrate impatient drivers. The powertrain becomes more responsive, making the car more enjoyable to drive. Using SPORT driving mode + manual gear shifting can enhance the driving experience.

5

1

Share

How to Deal with a Frozen Display Screen on the Changan CX70?

Confirm whether the car navigation system is original or aftermarket. There should be an RST label on the upper left of the navigation panel. Next to or below this label, there is a small pinhole for resetting the navigation to factory settings. Power off the navigation system, open the fuse box, locate the navigation fuse according to the annotations on the box, and remove it.

18

4

Share

How to Adjust the Headlight Height of Changan Honor

Enter the driver's cabin and locate the headlight height adjustment knob on the left side of the dashboard. Adjust according to the marked height levels on the knob. To set the headlights to the highest position, turn the knob to the "0" position. To lower the headlight height by one level, rotate the knob to the "1" position. The "2" position corresponds to a lower headlight height. For the lowest headlight height setting, turn the knob to the "3" position.

10

2

Share

What is the reason why all the reversing radars of Volkswagen Lavida are not working?

If all the reversing radars of Volkswagen Lavida are not working, it may be due to loose wiring connections or sensor malfunctions. Below is more information about reversing radars: 1. Introduction: The reversing radar, also known as "reverse anti-collision radar" or "parking assist device," mainly consists of ultrasonic sensors, a controller, and a display. 2. Working principle: When reversing, the reversing radar uses ultrasonic technology. The probes installed on the rear bumper send ultrasonic waves that reflect off obstacles, calculating the actual distance between the vehicle and the obstacle. This information is then provided to the driver, making parking or reversing easier and safer.

15

3

Share

How to Use the CS85 Electronic Gear Lever?

Can You Stick Your Head Out During Curve Driving?

What is ECO mode?

How to Set the Three Modes of Changan UNIT?

How to Deal with a Frozen Display Screen on the Changan CX70?

How to Adjust the Headlight Height of Changan Honor

What is the reason why all the reversing radars of Volkswagen Lavida are not working?

Are There Airbags in the Rear Seats of Cars?

What Causes Diesel Fuel to Burn Poorly?

How to Replace the Key Battery for Geely Cars?

Where is the child lock switch on the Nissan Sylphy?