How to Use the Cruise Control System?

[VonAmy]

Method for using the cruise control system: 1. Press the power key to turn on the system, at which point the cruise control indicator on the dashboard will light up; 2. Accelerate to the desired speed (above 40km/h) and press the SET key, then you can release the accelerator with your right foot, and the speed will be set at the current speed; 3. Press "RES+" to increase the speed at the current speed, or press "SET-" to decrease the speed at the current speed; 4. The cruise control can be deactivated by stepping on the brake, pressing the cancel (CANCEL) key, or pressing the power (ON/OFF) key; 5. If the cruise control was canceled by stepping on the brake or pressing the cancel key, you can press the RES key to restore the previous cruise control speed.

[VonMaya]

Using cruise control is actually quite simple, and it's my favorite feature for long-distance driving. Before activating it, make sure your speed is above 40 km/h, then press the cruise control button on the steering wheel (usually marked with a speedometer icon and arrow). When the indicator light appears on the dashboard, accelerate to your desired speed (I often set it to 110 km/h on highways) and press the SET button to lock it in. At this point, you can take your foot off the accelerator as the car maintains speed automatically. To fine-tune the speed, use the +/- buttons to adjust by 1-2 km/h increments. Pressing the brake or CANCEL button will temporarily deactivate it, while the RES button resumes your last set speed. However, I recommend avoiding cruise control during rainy conditions or on winding mountain roads - safety first. Remember to turn off the master switch when parking to prevent sudden acceleration upon next startup.

[VonJuliet]

Just learned how to use the cruise control function last week, sharing my operation steps: First press the ON/OFF button to activate the system, a white indicator light will appear on the dashboard. When driving above 60 km/h, press the SET button to lock the current speed. To increase or decrease speed without stepping on the accelerator, simply push the lever up to speed up and pull it down to slow down. In case of any situation, lightly tap the brake to temporarily exit cruise control, and press RES to quickly return to the set speed when the road conditions improve. After using it for a while, I discovered a small tip: it doesn't actively brake on long downhill slopes, and the speed might exceed the limit, so manually adjusting it lower is safer. It's basically useless in the city, but it saves a lot of leg effort on highways. However, be careful not to rely entirely on the system, and always keep your hands on the steering wheel.

[MacEmmanuel]

Three easy steps to operate cruise control: 1. Activate the cruise switch after exceeding 40 km/h; 2. Accelerate to the desired speed and press the set button; 3. Adjust with +/- buttons. To cancel cruise, simply tap the brake, and press RES to resume. Key point: Use it on straight roads as it automatically deactivates on curves for safety.

[DiCecilia]

As a commuter who drives 100 kilometers daily, cruise control is my fuel-saving secret weapon. Maintaining a constant speed after setting it is the most fuel-efficient, and I've tested it to save about 5%. Pay attention to these details when operating: the activation button is usually on the left side of the steering wheel, and you need to maintain acceleration for over 3 seconds before setting the speed—sudden throttle presses will cause setup failure. Using it in rainy weather can lead to skidding; I once experienced a wheel speed sensor misjudgment. Here's a lesser-known fact: some models allow switching dashboard display modes using the cruise control button. Always tidy up the steering wheel buttons after use to avoid accidental presses.

[LeErin]

Cruise control is perfect for long-distance highway driving. First, locate the control area on the steering wheel, which usually has SET, CANCEL, and speed adjustment buttons. Once you reach speeds above 60 km/h, press the SET button to activate it. After that, you don't need to press the accelerator at all—the car maintains speed automatically, giving your foot a chance to relax. If the car ahead suddenly slows down, lightly press the brake to deactivate cruise control, and press RES to seamlessly resume it. I prefer to keep my foot hovering over the brake pedal while using cruise control, just in case of emergencies. Remember, this system only manages speed, not steering—you must keep both hands on the wheel at all times, especially when passing highway exits.