How to Use the Cruise Control on Toyota Camry?

1 Answers
McMarley
07/29/25 4:37pm
Here are the steps to activate and use the cruise control on a Toyota Camry: 1. First, press the CRUSE button to activate the cruise control module. 2. When the CRUSE indicator appears on the dashboard, the vehicle must reach a speed of at least 40 mph to engage cruise control. Once at or above 40 mph, press the SET button to activate cruise control. 3. Speed adjustments can be made using the '+' and '-' buttons. Pushing the lever upward increases the speed, while pushing it downward decreases the speed. Holding the lever in either direction will rapidly increase or decrease the speed. 4. Pressing the accelerator or pushing the lever downward will temporarily cancel the function. Releasing the accelerator or pushing the lever inward will automatically resume the function. The CANCEL button is used to deactivate cruise control.
Was this review help?
10
5
Share
More Forum Discussions

How to adjust the headlight height of CT5?

Park the vehicle with normal tire pressure on a flat surface with one person in the driver's seat, maintain a certain distance between the front of the vehicle and the wall, then adjust the light beam. To adjust the light source, first cover the other headlights, then turn the upper, lower, left, and right beam adjustment screws to set the main beam at a certain height. When adjusting the headlights up, down, left, or right, the adjustment must be tightened. If loosening is required for adjustment, the screw should be fully loosened before making the adjustment.
17
4
Share

How to Complete 6-Point Deduction Study for B2 Driver's License on Mobile Phone?

Open the Traffic Management 12123 app and log in with your account credentials. After entering the homepage, click "More", scroll down the page, and locate the "Inspection Education Application" function. Upon clicking to enter, select "Online Education". Read the "Service Instructions" and click "Read and Agree". Verify the information related to the inspection education application, and if correct, click "Submit Application". After successful application, click "Start Learning" at the bottom.
17
2
Share

Why does the Jiefang J6 emit black smoke when shifting gears and accelerating?

The reasons why the Jiefang J6 emits black smoke when shifting gears and accelerating are as follows: 1. Incorrect ignition timing: This can also cause incomplete combustion of the air-fuel mixture; or if a few cylinders in the engine are not working, a small amount of black smoke may be emitted. The non-working cylinder can be identified using the cylinder cut-off method, or the ignition timing can be checked and adjusted. 2. Overly rich air-fuel mixture: This means the air-fuel mixture in the cylinder has an excessively low air-to-fuel ratio, leading to incomplete combustion. Some fuel decomposes into free carbon at high temperatures and is expelled through the exhaust pipe, forming black smoke. It is necessary to promptly check if the choke valve is fully open and, if needed, perform high-speed maintenance.
7
2
Share

How to Repair Steering Wheel Wear?

Here are the methods to repair steering wheel wear: 1. For minor wear, you can apply steering wheel repair fluid to the damaged area; 2. For more severe damage, it is recommended to seek help from an auto repair shop or detailing shop, where refurbishment techniques can be used to maximally repair issues such as fading, wear, staining, and aging of the steering wheel. Below are the functions of the steering wheel: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. The gear system introduced between the driver and the wheels by the steering wheel operates flexibly and effectively isolates intense vibrations from the road.
19
1
Share

What are clipless pedals?

Mountain bike clipless pedals and cycling shoes are equipment designed to assist in riding. Below is a partial introduction about clipless pedals: 1. Function: Using clipless pedals with cycling shoes can help correct riding posture and improve riding efficiency. However, beginners may easily fall when using clipless pedals and cycling shoes, so it's advisable for novices to avoid trying them or at least not attempt in crowded or high-traffic areas. 2. Classification: Clipless pedals are divided into mountain bike pedals and road bike pedals. Road bike pedals and mountain bike pedals correspond to different cleat systems. Road bike cleats include: SPD-SL, LOOK, Speedplay. Mountain bike cleats include: SPD and Crank Brothers (Eggbeaters).
8
1
Share

How to adjust the 24 valves on a J6P 500 horsepower engine?

Remove the fixing screws of the valve cover and carefully take off the valve cover, being cautious not to damage the valve cover gasket. Use a hand crank to rotate the crankshaft or pry the flywheel to position the first cylinder at the compression top dead center. Select a feeler gauge of the appropriate specification and insert it between the valve stem and the valve rocker arm. Gently pull the feeler gauge; if there is slight resistance, it indicates the correct clearance. Loosen the fixing nut, insert the feeler gauge into the valve clearance, and with one hand pulling the feeler gauge and the other turning the adjusting screw until slight resistance is felt on the feeler gauge.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.