How to Use the Cruise Control on the Regal?
4 Answers
The method to use the cruise control on the Regal is: 1. Accelerate the vehicle to above 40 km/h, then press the SET button to set the current speed; 2. You can press the RES+ or SET- buttons to fine-tune the speed to reach the desired velocity; 3. The cruise control indicator light will illuminate on the instrument panel, displaying the set cruising speed; 4. To cancel the cruise control, simply press the brake pedal or the cancel button. Taking the 2020 Regal as an example, it belongs to the mid-size sedan category, with a length of 4904mm, width of 1863mm, height of 1461mm, wheelbase of 2829mm, fuel tank capacity of 55 liters, and trunk capacity of 441 liters.
After starting your Regal, find an open road such as a highway and ensure your speed is stable above 40km/h. Press the cruise control button on the right side of the steering wheel to activate the system—this button may be labeled 'ON' or feature an icon. Accelerate to your desired speed, say 100km/h, then lightly press the SET button to lock in that speed. A dashboard indicator will light up, confirming cruise control is active. To adjust speed, press the '+' button to accelerate or the '-' button to decelerate, with each press changing speed by roughly 1-2km/h. Canceling cruise is simple: just tap the brake or press the CANCEL button to return to manual control. Avoid using cruise in congested urban areas or winding mountain roads, as delayed reactions could lead to accidents. On long drives, cruise control eases strain on your right foot, combats fatigue, and may slightly improve fuel efficiency.
As someone who frequently drives long distances, I've developed a habit of checking the system status after starting my Buick Regal: ensuring the engine is normal, and selecting a straight section of road such as a highway entrance. Press the cruise control switch above the steering wheel to activate the function, at which point the dashboard displays that cruise control is ready. Accelerate to the target speed, say 90 km/h, then press the SET button to lock in the speed. If you need to overtake temporarily, use the RESUME button to return to the last set speed, or adjust slightly with the +/- buttons. The key is to drive safely: avoid using cruise control in rain, snow, or low visibility conditions, and keep both hands ready to control the steering wheel. If a vehicle suddenly changes lanes, I gently press the brake to immediately disengage cruise control, avoiding the risk of rear-end collisions. For daily maintenance, it's advisable to regularly clean the buttons to prevent poor contact due to dust buildup.
When driving on the highway, I always love using the cruise control in my Regal. After starting the engine, locate the buttons on the steering wheel: first press the CRUISE key to activate the system, and an indicator light will illuminate on the dashboard. Drive at a steady speed, such as 80 km/h, then press the SET key to lock it in. Use the +/- buttons to fine-tune the speed, with increments of about 1 km per second, which is quite convenient. To pause cruise control, simply press CANCEL or step on the brake; pressing RESUME later will quickly return to the original speed. Remember, cruise control is not suitable for roads with many curves or complex traffic conditions—it works best on smooth highways, helping to extend driving endurance and reduce fuel consumption.
