How to Use the Cruise Control on the New MG6?

Should a scratched tire sidewall be replaced?

Vehicle tires are generally recommended to be replaced every 50,000 to 80,000 kilometers. As long as there are no obvious cracks or aging marks on the tire surface, you can check the distance between the wear indicators in the main drainage grooves and the wear layer. There are also triangular wear indicators on the tire crown. If the wear position is almost level with the wear indicators in the drainage grooves or the wear indicators on the crown, it means the tire needs to be replaced. Below is an introduction about tires: 1. If you want better noise reduction and comfort: It is recommended to choose Michelin. If you prefer better wear resistance and handling, consider Pirelli, Goodyear, or Bridgestone. For balanced performance, Continental is a good choice. Michelin and Continental use silica as an additive, which enhances comfort and noise reduction, while other brands typically use carbon black. If the scratch is on the tire sidewall, examine the deepest part of the damage. If the cords are visible, the tire must be replaced immediately. 2. If the cords are not visible: Monitor the area for any bulging in the following days. If a bulge appears, the tire must be replaced. If there is no bulging and the cords are not visible, and only a small cut is present in the sidewall rubber, you can drive to a tire shop to have the damaged area repaired.

15

1

Share

Where is the engine number located on the Mercedes-Benz GLE43?

The engine number of the Mercedes-Benz GLE43 is located on the driver's side underneath the vehicle. You need to lift the car, remove two underbody panels and a heat shield, and it can be found in the gap between the exhaust and the engine. The meaning of the engine number is as follows: First part: Includes the product series code, generation symbol, and regional or manufacturer code. The manufacturer selects the corresponding letters as needed, but they must be approved and filed by the industry standard regulatory body. Middle part: Consists of symbols for the number of cylinders, cylinder arrangement type, stroke, and cylinder diameter. Rear part: Comprises symbols for structural features and usage characteristics. End part: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects appropriate symbols to represent this. The rear part and the end part can be separated by a '-'.

10

2

Share

Why does the Audi A4L's central control screen force a reboot?

The Audi A4L's central control screen forces a reboot because the screen becomes unresponsive or freezes during operation, triggering the vehicle's automatic reboot function. Below is relevant information about the Audi A4L: 1. Powertrain: The Audi A4L is equipped with three types of engines: a low-power version of the 2.0-liter turbocharged engine, a medium-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. 2. Handling: The Audi quattro permanent all-wheel-drive system, under normal driving conditions, mechanically distributes 60% of the engine's power to the rear wheels. The vector torque control system can instantly redistribute power and torque, delivering power most efficiently to each wheel. In extreme driving conditions, up to 70% of the power can be allocated to the front wheels or up to 85% to the rear wheels.

11

3

Share

What Causes the Sunroof Rattle in Lavida?

The causes of sunroof rattle in Lavida include aging sunroof sealing strips or rubber gaskets, loose sunroof screws, and dust particles in the sunroof sliding tracks. Below are detailed explanations and solutions: Aging Sunroof Sealing Strips or Rubber Gaskets: Sunroof sealing strips exposed to prolonged rain or sunlight are prone to aging. Rubber conditioner can temporarily restore the strip's performance. Fully open the sunroof and spray the conditioner onto the sealing strip. Of course, a more direct solution is to replace the sunroof sealing strip. Loose Sunroof Screws: Loose screws can cause rattling in the headliner and sunroof, and may even create a risk of the sunroof detaching. Locate the sunroof screws and tighten them. Dust Particles in Sunroof Sliding Tracks: With repeated opening and closing of the sunroof, dust inevitably accumulates in the track gaps. When dust builds up to a certain level, friction occurs during operation, leading to rattling. Use a towel to remove the dust, and regular maintenance is crucial.

6

0

Share

What does the Volkswagen P173500 fault code mean?

The Volkswagen P173500 fault code indicates a malfunction in the transmission control module. It is recommended to have it inspected and repaired at a 4S shop. Symptoms of a faulty transmission control unit include abnormal transmission noise, transmission slippage, and transmission oil leakage. Transmission Abnormal Noise: Prolonged operation in high-temperature conditions can degrade the anti-wear and lubricating properties of transmission fluid, leading to wear or severe damage to components such as bearings and gears, or damage to gear side surfaces. Transmission Slippage: Excessive hydraulic oil levels can generate a large amount of air bubbles when violently agitated by planetary gears during operation. Additionally, wear or burning of clutch and brake friction plates or bands may occur. Transmission Oil Leakage: Transmission oil leakage results in insufficient internal lubrication and accelerates friction between gears, causing the transmission to malfunction. Causes of Transmission Control Unit Failure: Insufficient gear oil or poor-quality gear oil, severe wear on gear surfaces leading to excessive meshing clearance, fatigue spalling or chipping of gear teeth, excessive wear on intermediate or second shafts, or severe wear on spline shafts and internal gear splines causing excessive clearance, bent shafts or loose shaft locking components, loose bearings or damaged bearing cages, and unintended contact or rubbing of shift fork non-working parts.

16

5

Share

How many kilometers can the new Santana run after the fuel tank warning light comes on?

New Santana can run 80-100 kilometers after the fuel tank warning light comes on. Here are the meanings and solutions when the fuel tank light comes on: Meanings of the fuel tank light: If the fuel tank light comes on, the owner does not need to worry too much, because there is still some remaining fuel in the tank at this time, which can ensure that the car can drive safely for a certain distance. In fact, the fuel tank light mainly reminds the driver that the vehicle needs to be refueled, so find the nearest gas station as soon as possible. Solutions for fuel gauge warning: When the owner drives out and encounters the fuel gauge warning, try to reduce fuel consumption. At this time, turn off the air conditioner and the car's power-consuming equipment, so that the car can run with the lowest power consumption, and at the same time, keep the car running at a constant speed. Of course, the most effective way to avoid running out of fuel is to observe how much fuel is left in the tank before going on a long trip. If it is not enough, please go to the gas station to refuel immediately.

1

Share

How to Use the Cruise Control on the New MG6?

Should a scratched tire sidewall be replaced?

Where is the engine number located on the Mercedes-Benz GLE43?

Why does the Audi A4L's central control screen force a reboot?

What Causes the Sunroof Rattle in Lavida?

What does the Volkswagen P173500 fault code mean?

How many kilometers can the new Santana run after the fuel tank warning light comes on?

What are the consequences of being caught speeding by electronic surveillance and having 12 points deducted?

What to Do with China 5 Vehicles Under China 6 Standards?

What to Do If the Original Driver's License Continues to Be Used After a Replacement?

What procedures are required for a driver's license refund?