How to use the cruise control on the Hongqi H7?

1 Answers
StLillian
07/29/25 4:51pm
Hongqi H7 cruise control usage method: The cruise control switch is located on the left side of the steering wheel; Press the button once to turn it on; Accelerate to the desired speed and then press the set button. After the cruise control function is activated, the cruise control module will precisely calculate the required throttle input to maintain the current cruising speed based on the signals from the electronic throttle sensor. The Hongqi H7 is a premium sedan from a Chinese independent brand and the first strategic model in the revival of the Hongqi brand. Its dimensions are 5095mm in length, 1875mm in width, and 1485mm in height, with a wheelbase of 2970mm and a top speed of 235km/h.
Was this review help?
9
0
Share
More Forum Discussions

Is China VI gasoline ethanol gasoline?

China VI gasoline is not necessarily ethanol gasoline, it could also be diesel or gasoline with other components, specifically referring to fuel products that meet the China VI emission standards. China VI refers to the National Sixth Stage Emission Standards for Motor Vehicle Pollutants, not a specific type of gasoline. Based on comprehensive automotive technical conditions, it imposes restrictions on exhaust emission indicators, with fuel being just one factor affecting emissions. The National Sixth Stage Emission Standards for Motor Vehicle Pollutants are established to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent pollution from exhaust emissions of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health.
16
3
Share

How to turn off mute on Audi A3?

Audi A3 volume mute adjustment method is as follows: 1. Locate the volume adjustment knob on the vehicle's center console. 2. Turn the switch knob to the right and adjust it to the maximum. 3. Press and hold the voice control button on the right side of the multifunction steering wheel for five seconds. 4. Press the vehicle's one-touch start button to turn off the engine, then press it again to start the engine. At this point, the vehicle's mute function will be turned off. Additional information about mute: 1. If the mute condition occurs for the first time, you can try turning off the engine and then restarting it. After this operation, observe whether the audio returns to normal, as this may be caused by some system flaws. 2. You can also adjust the right roller knob. After finding the right roller knob of the car, pay attention to the mute toggle and unmute toggle indicators. - Mute toggle/pause: Turn the right roller knob downward or press the right roller knob. - Unmute toggle/pause: Turn the right roller knob upward or press the right roller knob.
13
5
Share

How to turn on the air conditioning in the Tiguan L?

The method to turn on the air conditioning in the Tiguan L: Press the A/C button to activate the cooling function, then rotate the temperature control knob to adjust the temperature. More information about the Tiguan L is as follows: 1. The Tiguan L is produced by Shanghai Volkswagen and is positioned as a mid-size SUV. 2. Exterior: The Tiguan L maintains a design similar to the overseas standard Tiguan model, with an overall simple and clean style. Compared to the standard wheelbase model, it adds some chrome decorative elements, and the C-pillar design has been modified. The Tiguan L has dimensions of 4712*1839*1673mm and a wheelbase of 2791mm. 3. Safety features: The Tiguan L comes standard with ESP vehicle stability system and front side airbags. The top-tier flagship model includes a pre-collision safety protection system, knee airbags, lane keeping system, 360-degree parking camera, and HUD head-up display system.
5
4
Share

What Causes High Idle Speed and Vibration?

The reasons for high idle speed and vibration are as follows: 1. Intake manifold or various valve leaks: Leaks can cause abnormal engine air intake, leading to excessively rich or lean air-fuel mixture, resulting in irregular engine combustion. This can cause engine idle vibration. 2. Excessive carbon buildup in the throttle body and intake passages: Too much carbon deposits and dirt in the throttle body and surrounding intake passages can change the cross-sectional area of the air passages, making it difficult for the control unit to precisely regulate idle air intake. This results in excessively rich or lean air-fuel mixture and irregular combustion. 3. Inaccurate air intake measurement: The control unit receives incorrect signals from the air flow sensor and issues wrong commands, leading to inaccurate idle air intake and abnormal air-fuel mixture concentration, causing irregular engine combustion. This is an indirect cause of unstable idle.
16
1
Share

How to use the 4WD system of the Prado?

Here are the methods to use the Prado's 4WD system: 1. Select the H4F full-time 4WD mode button on the center console, and the engine power will be distributed in a 40:60 ratio between front and rear. 2. When encountering complex road conditions, choose the H4L high-speed 4WD lock mode to achieve equal front and rear drive distribution. Additional information: 1. Taking the 2019 Prado as an example, it belongs to the mid-to-large SUV category, with body dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, a wheelbase of 2790mm, and a fuel tank capacity of 87 liters. 2. The 2019 Prado is equipped with a 3.5L naturally aspirated engine, delivering a maximum horsepower of 280PS, a maximum power output of 206kW, and a maximum torque of 365Nm, paired with a 6-speed automatic transmission.
4
0
Share

How to Install Brake Lights on the X-Trail?

Here are the steps to install brake lights on the X-Trail: 1. Use a Phillips screwdriver or socket to remove the bolts. 2. Pull the lamp assembly out from the rear pillar. 3. Rotate counterclockwise and remove the socket. 4. Remove the old bulb and install the new one. Additional information about the 2020 Nissan X-Trail is as follows: 1. The exterior design adopts the "Fluid Painting" concept, featuring dynamic and smooth body lines. 2. Dimensions are 4643mm*1820mm*1725mm with a wheelbase of 2706mm. 3. The front fascia features a new rounded design style. Higher trim levels come with LED high/low beam headlights and daytime running lights, with large chrome accents surrounding the oversized Nissan logo, enhancing the sense of power. 4. The body lines are more fluid and dynamic, with a cleaner rear design. The steeply raked rear window combined with the roof spoiler gives it a sporty appearance.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.