How to Use the Cruise Control on the Chevrolet Equinox?
4 Answers
Chevrolet Equinox cruise control usage is as follows: 1. Press the cancel button to deactivate cruise control. To resume cruise control, press the RES button. 2. SET is used to set the cruising speed. Before activating cruise control, the speed should be set using this button. 3. The +/- buttons are used to adjust the cruise control speed, with + for increasing and - for decreasing speed. Precautions for using cruise control on the Chevrolet Equinox: 1. Cruise control requires manual braking, while adaptive cruise control can brake automatically. 2. Once the brake pedal is pressed, cruise control is deactivated. The previously set speed is still stored in the system and can be directly resumed. 3. In severe weather conditions or on dangerous roads, always turn off cruise control to avoid hazards. 4. On downhill slopes, the vehicle may exceed the set cruising speed. Be sure to apply the brakes to assist in slowing down or turn off cruise control directly.
Using the cruise control on the Equinox is quite simple, and I remember using this feature often while driving. First, make sure the vehicle speed is above 40 km/h, such as on the highway. Find the button on the steering wheel, hold the SET button for two seconds to activate the system, and after releasing the accelerator, the car will automatically maintain the current speed. To adjust the speed up or down, press the RES or COAST button for slight adjustments, with each adjustment being about 1-2 km/h. Pressing the brake or the cancel button again will deactivate the cruise control. I find this feature super practical, as it saves a lot of fuel during long-distance driving and avoids fatigue from operating the accelerator. However, be careful not to use it recklessly during turns or in heavy traffic to prevent unintended acceleration. Personally, I prefer testing it on open roads first to ensure the system responds properly before using it for long trips.
The cruise control design of the Equinox is very safe, and I pay attention to these details when driving. The operation method is to activate it from the button group on the right side of the steering wheel. When the speed meets the standard, lightly press SET to activate it, and then you don't have to keep pressing the accelerator pedal—the car will cruise on its own. Use the ACCEL or DECEL buttons to carefully adjust the speed, avoiding abrupt changes. I remind everyone not to rely on cruise control in rainy, foggy weather or on winding roads, as braking will immediately cancel it, but you still need to keep a firm grip on the steering wheel. Every time before using it, I make sure the cruise light on the dashboard is lit, so I know the system is working properly and avoid accidents caused by misoperation. This feature is suitable for long-distance driving, saving fuel and improving comfort, but the key is to train your reaction speed.
I rely on the cruise control in my Equinox for hassle-free commuting. Just accelerate to your desired speed, say 60 km/h, then press the SET button to activate cruise control and release the throttle. To speed up, tap the RES button; to slow down, use COAST—effortlessly adjusting your speed. To cancel, simply hit the brakes or press CANCEL. I find it super practical, especially for long highway drives where it saves fuel and effort, but avoid using it in heavy traffic as the system might glitch. Bonus tip: Pairing cruise with lane-keeping assist enhances safety—I’ve used this combo on family trips, and the kids slept sounder. A few practice runs will have you mastering it in no time.
