How to Use the Cruise Control on the Boyue?

1 Answers
SaraDella
07/30/25 2:44am
Usage method of the Boyue cruise control: 1. Press the cruise control button to activate it, at which point the cruise control indicator light on the dashboard will illuminate. The indicator is typically shaped like a speedometer with a needle. 2. The cruise control function can only be enabled at speeds above 40km/h. First, accelerate to your desired speed, then press the SET button. After releasing the accelerator, the speed will be fixed at the current value. 3. Press "RES+" to increase speed from the current setting, or press "SET-" to decrease speed. 4. The cruise control can be deactivated by pressing the brake, the CANCEL button, or the ON/OFF switch. 5. If cruise control is canceled by braking or pressing the CANCEL button, pressing the RES button will restore the previous cruise control speed.
Was this review help?
18
0
Share
More Forum Discussions

What are the functions of the Geely Haoyue key?

Geely Haoyue key functions are as follows: 1. Engine anti-theft: This vehicle is equipped with a passive anti-theft system. The system does not require manual activation or deactivation. When the start switch is pressed and a valid remote control is detected inside the vehicle, the engine disable system will automatically deactivate. 2. Keyless unlocking: As long as a valid remote control is within a 1.6-meter range around the vehicle, simply pull the outer handles of the two front doors to unlock and open the doors. 3. Keyless locking: After turning off the start switch and closing the doors when leaving the vehicle, lightly touch the sensor area on the driver's side or front passenger's side door handle with your thumb to lock all four doors without pressing the lock button on the remote control. 4. Remote locking and unlocking: Press the unlock button on the remote control once to unlock all four doors, with the turn signals flashing three times for confirmation, interior lights gradually turning on, and position lights illuminating. Press the lock button on the remote control once to lock all four doors, with the turn signals flashing for confirmation, interior lights gradually turning off, and position lights extinguishing. Press and hold the trunk open button for more than two seconds to pop open the trunk (sedan version) or unlock the rear hatchback (hatchback version).
6
4
Share

Can You Continue Driving If the Car's Water Temperature Gauge Doesn't Move?

In this situation, you can drive for a short period of time. Below are the reasons why the water temperature gauge doesn't move: Low Winter Temperatures: In winter, when temperatures are very low, starting the vehicle may result in the engine water temperature not rising for an extended period. In this case, you can warm up the car for a longer time or drive slowly at low speeds for about five minutes. The water temperature gauge will gradually rise, and this won't affect the vehicle's operation. Water Temperature Gauge Not Receiving Sensor Signal: A malfunction may prevent the water temperature gauge from receiving signals from the water temperature sensor, causing it not to move. If the water temperature sensor is damaged, it can also result in the gauge not moving. Internal damage to the water temperature gauge itself can cause the same issue. Wiring problems, such as a broken circuit in the water temperature sensor's wiring, can prevent signals from reaching the gauge, leading to it not moving.
20
2
Share

What are the consequences of not changing transmission fluid?

Hazards of prolonged non-replacement of transmission fluid: Causes damage to the transmission's shift control mechanism; Leads to abnormal wear of gears and clutch plates inside the transmission; Affects the normal operation of the transmission, resulting in damage to the transmission valve body. Different vehicle models have different replacement cycles. Below are the replacement intervals for transmission fluid: Manual Transmission: Manual transmission fluid is generally recommended to be replaced every three years or approximately 100,000 kilometers. Automatic Transmission: Automatic transmission fluid is generally recommended to be replaced every two years or approximately 40,000 kilometers. Continuously Variable Transmission (CVT): CVT fluid is generally recommended to be replaced every two years or approximately 60,000 kilometers. The methods for changing transmission fluid are as follows: Loosen the drain plug at the bottom of the transmission to drain the old fluid before refilling. Remove the transmission oil pan directly for draining and refilling: This method is more thorough than the previous one, as it removes impurities accumulated at the bottom of the oil pan. Using a circulation machine to change automatic transmission fluid: Dynamic fluid exchange with an intelligent circulation machine can filter and clean out sludge and impurities inside the automatic transmission.
17
2
Share

What to Do If the Sunroof Sunshade Fabric Falls Off?

If the sunshade is damaged and can no longer be used, you can purchase a new sunshade at a 4S store for replacement. Alternatively, you can buy the parts online and repair the sunshade yourself. A sunshade is a product placed on the windshield or window glass when sunlight directly hits the car. More details about the sunshade are as follows: 1. Introduction One: Although the principle utilized by the sunshade can temporarily suppress the rise in cabin temperature, the overall environment remains unchanged. All components of the car conduct heat, so if the car is parked for an extended period, the cabin temperature will still rise. A small sunshade will not make a significant difference. 2. Introduction Two: This sunshade is not entirely without effect. The reason is that without a sunshade, direct sunlight entering the car can cause the temperature of the dashboard to rise, even reaching over 60 degrees. With the sunshade, most of the heat is absorbed by it, and the temperature of the interior will align with the cabin temperature. Therefore, while the sunshade does not alleviate the rise in cabin temperature over long parking periods, it does help reduce the temperature rise of the interior components and slow down the aging of the interior.
8
1
Share

Why Does a Car Fuel Tank Generate Gas?

The reason for gas generation in the fuel tank is due to gasoline being a highly volatile fuel. The specific details are as follows: High temperatures causing the fuel pump in the tank to heat up: During hot summer weather, the fuel pump inside the tank also heats up. Both gas and liquid expand when heated, with gas having a higher expansion rate than liquid. However, the entire tank space is a sealed container with a fixed volume, so the pressure generated by the gas sealed inside the tank is greater than the external atmospheric pressure. When we open the fuel tank cap, the pressurized gaseous gasoline sprays out from the tank. Clogged carbon canister: A malfunctioning carbon canister can also cause the tank cap to open and gas to spray out. Similarly, during summer, the fuel inside the tank can easily experience an imbalance in internal and external air pressure, and the rapidly rising temperature prevents the carbon canister from promptly handling the pressure imbalance. This results in gas being present when the fuel tank cap is opened.
13
5
Share

Why is it difficult to start a car when it's hot?

Difficulty in starting a hot sedan is often caused by excessive carbon deposits in areas such as the throttle body, idle speed motor, intake manifold, and combustion chamber. Below is a detailed explanation of the reasons: Carbon Deposits: Carbon deposits have a strong adsorption effect on gasoline. If there are excessive carbon deposits on the intake valve, throttle body, or piston, they can absorb some fuel, leading to an overly lean air-fuel mixture, which affects starting. Damaged or Leaking Carbon Canister Solenoid Valve: The carbon canister solenoid valve controls the flow of fuel vapor from the carbon canister. After the engine is turned off, gasoline vapor mixes with fresh air in the canister and is stored in the activated carbon canister. When the engine starts, the solenoid valve between the activated carbon canister and the intake manifold opens, allowing the gasoline vapor in the canister to be drawn into the cylinders by the vacuum in the intake manifold, where it is burned. Ignition Coil: When the ignition coil heats up, the resistance of the wires increases, weakening the primary current. As a result, the voltage in the secondary coil decreases, leading to weaker sparks. This reduction in ignition energy may cause difficulty in starting the engine.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.