How to Use the Cruise Control on the Baojun 730?

1 Answers
LukasMarie
07/30/25 1:58am
The method to use the cruise control on the Baojun 730 is as follows: Press the adjustment switch to activate the cruise control standby mode, accelerate to the desired speed, and then push the adjustment lever downward. To cancel the cruise control, you can pull the adjustment lever upward, turn off the main cruise control adjustment switch, press the accelerator, or lightly tap the brake. Cruise control, also known as a speed control device, automatically maintains the vehicle's speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. Taking the 2021 Baojun 730 1.5L Manual Fashion 7-seater as an example: its dimensions are 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. It is equipped with a 6-speed manual transmission and has a top speed of 150 kilometers per hour.
Was this review help?
6
2
Share
More Forum Discussions

What is the fuel consumption of the Mustang 2.3t?

The comprehensive fuel consumption given by the Ministry of Industry and Information Technology for the Mustang 2.3t is 10.5L/100km. However, individual driving habits and road conditions vary, leading to differences in fuel consumption. Here are some extended details: 1. The average suburban fuel consumption of the Ford Mustang 2.3t is 9.8L/100km, while on the highway, it is around 6L/100km. If the road conditions are poor and there is traffic congestion, urban fuel consumption may rise to approximately 12L/100km. The fuel consumption is relatively high, considering it is a sporty coupe. 2. The Ford Mustang has a strong sporty appearance. It features a new polygonal LED headlight assembly and a larger hexagonal front grille, along with dual heat dissipation vents on the engine hood, giving it a more aggressive overall look.
9
2
Share

What kind of engine oil is best for Ford Mustang?

Turbocharged engines should use full synthetic oil with a viscosity of 40, while naturally aspirated engines should use full synthetic oil with a viscosity of 60. Below is the relevant introduction: 1. Engine differences: The Mustang uses two types of engines, one is a 2.3-liter turbocharged engine, and the other is a 5.0-liter V8 naturally aspirated engine. 2. Oil selection method: Since the V8 engine generates higher heat and operates at higher RPMs, it requires oil with higher viscosity. During normal engine operation, the oil forms a thin film on the surfaces of various engine components, preventing direct contact and friction between them. The viscosity of the oil should not be too high or too low. If the viscosity is too low, the oil cannot form a stable film on the engine components, which will accelerate engine wear. If the viscosity is too high, it will increase the resistance during engine operation, affecting power output and fuel economy.
7
3
Share

What Causes the Parking Brake Warning Light to Illuminate?

The parking brake warning light may illuminate due to the following reasons: 1. The handbrake is not released or not fully released; 2. Low brake fluid level; 3. ABS function failure; 4. Severely worn brake pads; 5. Non-compliant brake fluid; 6. Poor contact in the parking brake switch wiring harness. Below is additional information: 1. The braking system mainly consists of several components including the energy supply device, control device, transmission device, and brake. 2. The primary functions of the braking system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a stationary vehicle from moving.
4
0
Share

How to Turn Off the Ambient Light?

The method to turn off the car's ambient light is as follows: the first button on the left side of the steering wheel, when pushed downward, can adjust the light to its dimmest setting. Ambient lighting in cars has now become a key selling point for many vehicle models and is favored by numerous consumers. Relevant information about car ambient lighting is as follows: 1. Definition of Ambient Light: Car ambient lighting is essentially an interior light used to enhance the atmosphere inside the vehicle. It allows users to set the color, brightness, temperature, and direction of the light as needed, making the interior more vibrant at night, enhancing the mood, and creating a specific ambiance. 2. Function: Typically, car ambient lights are mainly red, blue, green, etc., similar to common decorative lights, and the colors can be freely chosen. However, it is important to note that the color of the ambient light should not interfere with normal safe driving. After all, its primary purpose is to enhance the atmosphere, soothe the driver's mood, and alleviate fatigue.
18
4
Share

What does the dAppen car sticker mean?

Dappen is a car sticker for modified cars without any special meaning. It is merely a label and symbol for modified vehicles, serving as a trendy and personalized decoration for the car body. Below is some related information about car modifications: 1. Modification Projects: Car modifications include engine modifications, chassis modifications, electrical equipment modifications, body modifications, interior modifications, and entertainment and information system modifications. 2. Engine Modifications: For engine modifications, such as intake system, exhaust system, fuel supply system, crankshaft and connecting rod mechanism, valve train, compression ratio, and turbocharging system. In the intake system modification, try to avoid large bends in the intake pipe, use heat insulation materials to separate the engine compartment and the air filter (commonly referred to as the 'mushroom head'). It is important to note that cars with more thorough modifications may require a larger throttle body.
17
0
Share

How many liters of transmission oil does an Aisin 6AT require?

The amount of oil used varies depending on the oil change method. During maintenance, there are two modes to choose from: 1. Approximately 10 liters can be replaced with a flushing machine oil change. The effect of flushing oil change is better, as it can remove impurities at the bottom and make the machine interior cleaner. 2. Gravity oil change requires about 4-6 liters. This method is similar to changing the vehicle's engine oil. Below are some additional tips: 1. It is recommended to change the transmission oil once every 60,000 kilometers. 2. If the vehicle is used frequently, the transmission oil should be changed at around 40,000 kilometers. 3. When changing the transmission oil, it is important to use the specific oil designed for the vehicle to ensure normal operation and extend the transmission's lifespan.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.