How to Use the Cruise Control on Kia K5?
2 Answers
How to use the cruise control function on Kia K5: 1. Press the CRUISE button on the steering wheel to activate the cruise control system. 2. The cruise control indicator on the instrument panel will illuminate. Accelerate to the desired speed, which must be greater than 30 km/h (20 mph). 3. Move the lever downward (to SET-) and release it when the desired speed is reached. The cruise set indicator on the instrument panel will illuminate. 4. Release the accelerator pedal simultaneously, and the vehicle will automatically maintain this desired speed. Below is an introduction to the cruise control functions of the Kia K5: 1. ON/OFF button – Cruise control switch: Function one: When the ON/OFF button is pressed, the CRUISE/MAIN cruise main indicator above the coolant temperature gauge will illuminate. The cruise control system is activated and ready to receive various speed control operations. Function two: When the ON/OFF button is pressed again, the CRUISE/MAIN cruise main indicator above the coolant temperature gauge will turn off. The cruise control system is deactivated. 2. SET/COAST button – Speed setting/deceleration control switch (allowed when speed is greater than 30 km/h): Function one: When the SET/COAST button is pressed while driving, the current speed is set, and the CRUISE set indicator above the coolant temperature gauge will illuminate. Release the accelerator pedal, and the vehicle will drive at the set speed. Function two: During cruise control, pressing the SET/COAST button again will reduce the speed by 1.6 km/h each time. Function three: During cruise control, holding the button down will gradually decrease the speed.
Last time I drove my Kia K5 on the highway using cruise control, it felt super practical and effortless. The operation is simple: first, get the car up to around 40 km/h or more, ensure the surroundings are safe, then find and press the cruise button on the steering wheel—the light turns on to activate the system. Next, press the set button to lock in the current speed, and the car will maintain that speed automatically. To go faster, press the plus button to increase speed, or press the minus button to slow down. If you need to decelerate, lightly tap the brake or press the cancel button to turn it off immediately. I found it really helps reduce foot fatigue, especially on long-distance drives, saving a lot of energy. I recommend beginners practice using it on open roads the first time to avoid mistakes affecting safety. Now, I’ve made it a habit—I always use this feature when traveling. It’s become a must-have for road trips.
