How to use the cruise control on Jetta VS5?

What are the reasons for ineffective braking in a hydraulic braking system?

There are four main reasons for ineffective braking in a hydraulic braking system, which are: 1. Loose connection between the brake pedal and the master cylinder. 2. No fluid or severe lack of fluid in the brake fluid reservoir. 3. Brake pipe fracture or oil leakage. 4. Rupture of the master cylinder piston cup. To ensure the uninterrupted operation of the hydraulic brake, it is necessary to regularly maintain it. There are five maintenance measures, which are: 1. Frequently add lubricant to the electromagnetic brake. 2. Regularly check the length of the armature stroke. During the operation of the brake, wear on the braking surface will occur, increasing the length of the armature stroke. When the armature stroke length does not reach the normal value, it should be adjusted to maintain the minimum gap between the braking surface and the rotating disc. 3. If the worn braking surface is replaced, the minimum gap between the braking surface and the rotating disc should be readjusted appropriately. 4. Frequently check the tightness of the bolts. 5. Regularly inspect the mechanical wear condition of the movable parts and remove dust, debris, and dirt from the surface of the electromagnet components.

18

2

Share

What is the tire model specification for the Livina?

The standard tires equipped on the Livina are 175/70-R14 for the base version and 185/65-R15 for the mid-to-high versions, with Dunlop SP300 series tires as standard. Below is an introduction to the functions of tires: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power performance, braking performance, and passability; working together with the car suspension to mitigate impacts during driving and dampen resulting vibrations; 3. Preventing severe vibrations and early damage to car components, adapting to the vehicle's high-speed performance and reducing driving noise, ensuring driving safety, handling stability, comfort, and fuel economy.

3

2

Share

Can a Jaguar with a hood ornament pass the annual inspection?

Jaguar with a hood ornament can pass the annual inspection. Here is some relevant information about Jaguar cars: 1. Historical Background: Jaguar is a company that sells luxury sedans, sports cars, and coupe SUVs. It was founded in 1935 and is headquartered in the UK. In March 2004, Jaguar officially entered the Chinese market. In February 2015, it celebrated its 80th anniversary and officially launched the "Year of the Jaguar" in 2015. 2. Exterior Design: Jaguar features stunning and sharp eyes, a sculpted appearance, meticulously polished bodywork that reflects light, and unparalleled craftsmanship. Jaguar takes the concept of handcrafted luxury cars to the extreme. It is like a piece of art that has undergone transformations through space and time, refined through countless trials, exuding a subtle and heartwarming warmth. Every detail embodies the essence of traditional British car-making art: elegance, agility, and timeless refinement. Lyons' philosophy of car-making has determined the attitude and extraordinary charm that Jaguar has upheld since its inception.

3

5

Share

Where is the spark plug installed?

The spark plug is installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition cables, but over the past decade or so, most passenger car engines have been updated to feature direct connection between the ignition coil and the spark plug. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and center electrode, it ionizes the medium between the center electrode and ground electrode to create a spark, thereby igniting the air-fuel mixture in the cylinder. Spark plug replacement intervals: Under normal maintenance conditions, replacement is recommended every 40,000-60,000 kilometers. However, this may vary depending on the brand and engine type, so always consult your owner's manual. The following replacement standards may serve as reference: Platinum spark plugs: replace at 40,000 km; standard nickel alloy spark plugs: replace at 20,000 km; iridium spark plugs: replace at 60,000-80,000 km.

6

2

Share

What are the declared dimensions of the 2020 Honda Fit?

Length × Width × Height (mm) is 4096 × 1695 × 1525, a 5-door, 5-seat hatchback. Here is the relevant introduction about the 2020 Honda Fit: 1. Safety Features: The 2020 Honda Fit (FIT) has upgraded safety features, with the addition of VSA (Vehicle Stability Assist) system, tire pressure monitoring system, HSA (Hill Start Assist) system, and ESS (Emergency Stop Signal) system as standard across all trims. 2. Stylish and Safe Upgrade: The 2020 Honda Fit (FIT) has what it takes to keep the excitement going. It always prioritizes the safety and comfort of passengers, featuring standard EPS (Electric Power Steering) system, child safety door locks, and an intelligent anti-theft engine immobilizer. These technological configurations further enhance safety, maximizing the protection of passengers and safeguarding the vibrant lifestyle of young consumers. 3. Model Design: The Honda Fit (FIT) is one of the few models that can impress even the most discerning young consumers. It adopts Honda's bold and aggressive latest family-style front grille, with a wide-mouth design and wing-shaped elements that create a stylish and dynamic appearance, exuding youthful energy. The blade-style double waistline extends to the rear, combining simplicity with a well-proportioned body, showcasing a sporty and elegant silhouette. The imposing and wide rear is complemented by an integrated rear spoiler formed by stamping, giving it a determined and progressive look. The 2020 Honda Fit (FIT) offers six exterior colors: Sky Blue, Glacier Silver, Ocean Blue, Rallye Red, Taffeta White, and Blossom Orange, fully catering to consumers' personalized needs.

14

5

Share

What are the steps to replace shock absorbers?

Replacing car shock absorbers is a relatively complex process: Generally, you first loosen the nuts, remove the wheels, and then take out the shock absorbers. When reinstalling the shock absorbers, lubricating grease should be applied. After installing the shock absorbers, reattach the wheels and tighten the nuts. The detailed steps are as follows: 1. First, loosen the wheel nuts in a diagonal sequence, but do not remove them completely. 2. Use a lift to raise the car to a moderate height, just enough for convenient operation. 3. Remove all the wheel nuts in a diagonal sequence and take off the wheels. 4. Secure the shock absorber arm with a clamp jack, open the engine hood, and loosen the upper body fixing nut of the shock absorber (do not remove it completely). Then, turn the clamp jack to lift the shock absorber arm until the lower end of the shock absorber separates from the front axle fixing point. Slowly move the shock absorber away and gradually lower the shock absorber arm until the shock absorber's elasticity is fully released. Finally, completely loosen the upper body fixing nut of the shock absorber and remove it. 5. After removing the shock absorber, use a shock absorber spring tool to secure the spring to prevent it from shifting or popping out when removing the top screw. 6. Disassemble and replace any damaged parts of the shock absorber, including the rubber cover. If the shock absorber spring is not severely rusted or broken, it does not need to be replaced. When reassembling the shock absorber, apply lubricating grease to enhance wear resistance. 7. Fix the upper end of the shock absorber to the car body to ensure it does not fall. Use a clamp jack to secure the shock absorber arm and lift it to align the lower end of the shock absorber with the front axle support. Secure the lower end of the shock absorber arm to the front axle with bolts, fasten the spring strut arm nut, and then tighten the upper body fixing nut of the shock absorber. Follow the same steps to replace the remaining three shock absorbers.

13

5

Share

How to use the cruise control on Jetta VS5?

What are the reasons for ineffective braking in a hydraulic braking system?

What is the tire model specification for the Livina?

Can a Jaguar with a hood ornament pass the annual inspection?

Where is the spark plug installed?

What are the declared dimensions of the 2020 Honda Fit?

What are the steps to replace shock absorbers?

How long is the Audi A4

How to Turn Off the Auto Start-Stop Function on the New Kia Sportage?

The Difference Between Single-Cylinder and Twin-Cylinder Engines

What Happens When a Car Lacks Engine Oil?