How to use the cruise control on Changan CS35 Plus?

1 Answers
LeElliot
07/30/25 4:11am
Changan CS35 Plus cruise control usage method: 1. Adjust and set the cruise speed using the RES+ and SET- buttons; 2. To activate cruise control, press the button on the steering wheel until the cruise status indicator turns green; 3. When cruise control is activated, if the speed is below 30 km/h, the cruise speed will be set to 30 km/h. If the speed is 30 km/h or above, the cruise speed will be the current speed; 4. If the speed exceeds 150 km/h, it means it is beyond the working range of cruise control and cannot be activated; 5. Press RES+ or SET- to increase or decrease the cruise speed. After exiting cruise control, pressing RES+ will reactivate and restore the previously set speed, while pressing SET- will reactivate and automatically set the cruise speed to the current driving speed. Release the button when the cruise speed reaches the desired value.
Was this review help?
4
2
Share
More Forum Discussions

Will the car lights stay on after the key is removed?

After removing the car key, the lights may remain on for about 30 seconds before automatically turning off. This is because the headlights have a delayed shutdown feature after the vehicle is turned off. Car headlights, commonly known as headlamps, come in two types: low beam and high beam. Their main function is to provide illumination for nighttime driving. Low beams are used for city roads with streetlights, while high beams are for roads without streetlights or highways in rural areas. There is also a function to switch between low and high beams, which is used for signaling or overtaking. How car headlights work: The sensor, composed of electronic components like photoresistors, sends electronic signals to the ECU to control the turning on or off of the headlights and the switching between low and high beams. When driving, if the environment suddenly becomes dark, the headlights will automatically turn on. They will automatically turn off when there is sufficient light. During nighttime encounters with other vehicles, the headlights will also automatically switch between low and high beams. The role of car headlights: Automatic headlights can turn on when the owner forgets to switch them on, eliminating the need to manually toggle the switch when illumination is required. They can also automatically turn off based on the intensity of ambient light.
10
3
Share

Where Should Water Not Enter a Car

Three areas in a car that are most vulnerable to water ingress: Area 1: Sunroof The sunroof is located on the roof. When rainwater flows onto it, the water will run along the sunroof channel towards the drain holes, then be discharged through drainage tubes typically hidden inside the A and C pillars. If the sunroof drain holes become clogged, accumulated water may overflow into the car interior. Another potential issue is the sealing rubber gasket. Area 2: Door During rainy weather, window glass and sealing rubber strips usually do a good job of keeping rainwater out. Water that seeps through gaps will enter the door cavity and flow out through drainage holes at the bottom of the door. However, if the door develops the same problems as the sunroof—clogged drainage holes, aged or loose sealing strips, or damaged rubber gaskets at the bottom drainage holes—it will prevent water from draining properly, allowing it to flow into the car floor and become a persistent nuisance. Area 3: Chassis The car chassis generally has drainage holes to allow water to escape after driving through water. If these drainage holes are blocked by debris or if the rubber gaskets around them have aged and fallen off, water can easily seep in after driving through water. Therefore, after driving through water, it's advisable to promptly lift the floor mats to check for any accumulated water. If found, it should be dried immediately, and the car chassis should be dehumidified.
7
5
Share

Is there a service that delivers gasoline if my car runs out of fuel?

There are services that deliver gasoline when your car runs out of fuel. You can call the local road administration hotline to request assistance from staff who can deliver fuel, although a certain fee will apply. After your vehicle runs out of fuel, you should first move it to a safe area, turn on the hazard lights, and place a triangular warning sign 50-100 meters behind the vehicle. Wait for assistance at the location after making the call. More information about gasoline is as follows: Physical and Chemical Properties: Gasoline is a colorless to pale yellow, easily flowing liquid at room temperature, which is difficult to dissolve in water and is highly flammable. Its distillation range is between 30°C and 220°C. It becomes explosive when the air contains 74 to 123 grams per cubic meter and encounters a flame. Preparation Method: Gasoline is produced through the fractional distillation of crude oil and the cracking of heavy distillates. During crude oil processing, various units such as distillation, catalytic cracking, thermal cracking, hydrocracking, catalytic reforming, and alkylation produce gasoline components, but with different octane ratings. For example, straight-run gasoline has a low octane rating and cannot be used alone as an engine fuel. Additionally, the sulfur content varies among different components. Therefore, gasoline components with high sulfur content require desulfurization refining. Subsequently, these gasoline components are blended, and high-octane components are added if necessary, resulting in a gasoline product that meets national standards.
19
1
Share

How Many Years Does It Take for a Buick to Start Having Problems?

Whether a car develops problems depends on later maintenance. Here are the specific details about car maintenance: 1. Main items: Replace engine oil and oil filter, air filter, fuel filter, transmission fluid, and tire maintenance. 2. Purpose: The goal of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. 3. Importance: Daily car maintenance is very important. Neglecting routine maintenance can not only cause unnecessary damage to the vehicle, shortening its lifespan, but also endanger driving safety.
8
0
Share

Is it okay to wash the car by fetching water with a bucket?

Car owners can wash their cars by fetching water with a bucket, as long as the washing method is correct and scientific, it will not damage the car paint. After prolonged use, cars inevitably accumulate dust and dirt. When washing the car, this dirt will mix into the water. Continuing to use the same dirty water to wash the car is equivalent to rubbing the car body with sand and gravel, which can cause wear and tear on the car paint. Therefore, if you choose to wash the car yourself, it is best to change the water frequently to achieve better washing results. Here are some precautions for washing the car yourself: 1. Do not use plastic brushes to wash the car: This can scratch the car paint and window glass. It is best to choose soft brushes or use sponges or cotton cloths for washing. 2. Do not use laundry detergent or dish soap to wash the car: These are either too acidic or too alkaline, which can cause oxidation of the car paint. Over time, the car body will become dull and the paint may even peel off. It is recommended to purchase specialized car cleaning solutions from car beauty shops, as these are mostly neutral and less harmful to the car paint. 3. Do not wash the car with plain water only: Plain water can only remove surface dirt and cannot achieve deep cleaning. Moreover, most plain water today is slightly acidic and contains calcium, magnesium ions, and other substances, which can damage the car during washing. Therefore, it is best to use car cleaning solutions for washing. 4. Do not wash the car under direct sunlight: If water droplets are not wiped off the car paint after washing, direct sunlight can create localized high temperatures, leading to aging of the car paint.
4
2
Share

Why won't my Lexus start?

Lexus won't start for the following reasons: 1. Insufficient fuel: If the fuel level is too low, the car naturally won't start. 2. Incorrect gear position: The car may not start if it's in the wrong gear. Generally, the correct gear positions for starting are P (Park) or N (Neutral). 3. Electrical or electronic failure: If this is the cause, there are usually no warning signs before the car fails to start—it happens very suddenly. 5. Circuit failures: Blown fuses, open circuit in the high-voltage coil, open circuit in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs, etc.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.