How to use the cruise control on Changan CS35?

[DiAriel]

The method to use the cruise control on Changan CS35 is: 1. Press the control switch to activate the cruise control standby mode, accelerate to the desired speed, and then push the control lever downward to set the cruising speed; 2. To accelerate, push the control lever upward or press the accelerator pedal; 3. To cancel the cruise control, pull the control lever upward, turn off the main cruise control switch, press the accelerator pedal, or lightly tap the brake. The Changan CS35 is a compact 5-door, 5-seat SUV with body dimensions of: length 4170mm, width 1810mm, height 1670mm, and a wheelbase of 2560mm. The Changan CS35 is equipped with a 1.6L engine, delivering a maximum power of 92kW and a maximum torque of 160Nm, paired with a 4-speed automatic transmission.

[DelMariana]

The cruise control on the Changan CS35 is really convenient! I often use it on long drives. The first step is to get the speed up, usually above 40km/h to activate it. There's a cruise button next to the steering wheel—press it to activate the system, and an indicator light will come on. Then, when you reach your desired speed, like 80 mph on the highway, gently press the SET button to lock it in. Want to fine-tune the speed? Just tap the "+" or "-" button to increase or decrease by one mph. If the car ahead slows down or there's an unexpected situation, stepping on the brake cancels the cruise control automatically. Don't worry about fuel consumption—cruise control can help save a bit, especially on flat, long-distance roads. Once you get the hang of it, it's a real effort-saver, but remember not to use it recklessly in rain or snow. I recommend beginners try it out first on an open highway.

[MadisonLee]

Operating the cruise control on the Changan CS35 is quite straightforward. First, I make sure the speed exceeds 40km/h, then press the cruise control button on the steering wheel to activate it. Next, I accelerate to the desired speed, say 70km/h, and press the SET button to lock it in. After that, I can take my foot off the pedal and the car will maintain the speed automatically. If there's traffic ahead, I can press CANCEL to pause or step on the brake to resume manual control. Going too fast? Tap the "-" to reduce speed; too slow? Press "+" to increase it. I rely on this feature daily for highway commutes—it helps prevent fatigue and saves some fuel. However, it's crucial to stay alert to road conditions and not over-rely on it for safety. I recommend regular checks to ensure the buttons function properly and avoid wiring issues. Overall, it's a quick and easy setup.

[DelEmilio]

I tried the cruise control function on the Changan CS35, and it works really well. When driving at a sufficient speed, just press the cruise activation button, and you're good to go once you hear the beep. Then press the SET button to lock the current speed, and your foot can take a break. If you need to slow down, just hit the brakes to pause it automatically, and press the RES button to resume. Adjust the speed with the '+' or '-' buttons. I think it's very user-friendly for beginners, just don't forget to check that the system light is on. It's best used less in the city but reliable and effortless on the highway.

[JourneyDella]

Safety comes first when using the cruise control on the Changan CS35. I usually activate the system when the speed exceeds 40km/h, then set the speed using the steering wheel button. Pressing the brake pedal cancels the locked speed. Use the adjustment buttons for minor speed changes instead of sudden acceleration. When traveling with family, I always remind everyone to avoid distractions while operating it, and refrain from using it during rainy/foggy weather or on curves. Regular maintenance checks on the wiring help prevent malfunctions. Though simple to operate, it requires focused attention—I make sure children are seated properly to avoid affecting driving. This feature truly enhances comfort on long trips.