How to Use the Cruise Control on Buick Regal?

[OCassidy]

To use the cruise control on Buick Regal: 1. The cruise control function is operated via the multifunction buttons on the left side of the steering wheel. Press the cruise control button to enter standby mode; 2. After accelerating the vehicle to the desired speed, press the SET- button to activate cruise control; 3. Press the RES+ button to increase the speed; 4. Press the SET- button to decrease the speed; 5. Press the distance button to adjust the following distance; 6. To temporarily deactivate cruise control, press the button on the left side of the steering wheel or apply the brake pedal; 7. To resume cruise control, press the RES+ button again. To completely exit cruise control, press the cruise control button.

[DiVera]

I remember the first time I used the cruise control on my Buick Regal. It was a long highway trip, and it made driving much easier. After starting the car, I found the ON button on the steering wheel and pressed it to activate the system. Once I reached a speed of over 40 km/h on the highway, say 60 km/h, I simply pressed the SET button to lock in the speed. After that, the throttle maintained the speed automatically, so I didn’t need to press the accelerator. I could adjust the speed incrementally using the +/- buttons, increasing it to 70 km/h or decreasing it to 55 km/h as needed. To temporarily deactivate it, like when encountering traffic, I pressed the CANCEL button or lightly tapped the brake. To resume the original speed, pressing the RESUME button brought it right back. It’s important not to use this feature on slippery roads or steep slopes to avoid skidding or losing control. I mostly use it on long highway drives—it reduces fatigue and saves fuel—but I always stay alert to road conditions and don’t get too relaxed. Before each drive, it’s a good idea to test the button responsiveness.

[Henry]

As a daily commuter who drives to work, cruise control makes my commute much easier. On the Buick Regal, simply press the ON button to activate the system, and when your speed reaches around 40, press the SET button to lock the current speed. You can fine-tune the speed with the +/- buttons, such as increasing by 5 km/h or decreasing by a few km/h. To pause, press CANCEL or step on the brake. To resume the original speed, press RESUME. It works great on highways, reducing foot fatigue, but avoid using it in the city or on winding roads to prevent delayed reactions. Remember to regularly check the vehicle system to avoid safety issues caused by malfunctions. I often clean the button contacts to keep the function working properly.

[MiaAnn]

As a new owner of a Buick Regal, I found it quite easy to learn the cruise control. While driving, press the ON button to activate the system. When the speed reaches 40 km/h, such as on the highway, simply press the SET button to set the speed. After that, use the +/- buttons to adjust the speed incrementally. To deactivate, press CANCEL or step on the brake. Press RESUME to resume. I find it very useful for long trips, but wouldn't recommend trying it in congested traffic. You'll get the hang of it after practicing a few times.