How to Use the Cruise Control on Buick GL6?

[VanBraxton]

When using cruise control, you can maintain a speed of approximately 40 km/h or higher without pressing the accelerator pedal. Press the button to turn the cruise control system on and off; press the button to cancel cruise control. If there is a set speed in the memory, pressing this button will resume that cruise speed, and holding this button will accelerate. Press this button briefly to set the speed and enable cruise control. If the cruise control is already enabled, you can use it to decrease the vehicle speed.

[DelEmery]

I've been driving my Buick GL6 for several years, and the cruise control is particularly convenient, mostly used on highways. The operation is straightforward: first, ensure the speed exceeds 40 kilometers per hour, then press the cruise button on the left side of the steering wheel, which has a speedometer icon. This activates the cruise system, but the speed isn't set yet. Next, accelerate to your desired speed, say 60 or 80, and press the 'SET' button to lock the current speed. To adjust the speed later, use the adjacent '+' or '-' buttons, with each press changing the speed by about 1 kilometer per hour. To temporarily cancel, simply press the brake or the cancel button, and hitting the 'RES' button will resume the previous speed. To turn off the system, just press the cruise button again. Remember, this feature is best suited for flat or simple road conditions—avoid using it in heavy city traffic to prevent delayed reactions. I always check if the cruise control is functioning properly before long trips to prevent unexpected malfunctions. Additionally, Buick's design is thoughtful, displaying the current status on the dashboard during operation, making it clear and error-free.

[PresleyMarie]

I've tried many car features, and the cruise control on the Buick GL6 is one of the most user-friendly I've used. The steps are straightforward: Drive on the highway until you reach around 50 km/h, then press and hold the cruise button on the steering wheel (it has a small circled arrow icon) to activate the system—the illuminated icon indicates it's on. Next, accelerate to your desired speed, say 80 km/h, and press the "SET" button to lock it in. To adjust speed while cruising, tap "+" to increase or "-" to decrease, with each tap changing the speed by 1 km/h. Temporarily deactivate it by braking or pressing the cancel button; to resume, hit "RES." When done, simply turn off the cruise control button to exit. I highly recommend using it on open highways to reduce fatigue and save fuel. The GL6's system responds quickly with minimal lag, though beginners should practice on quieter roads first. If it occasionally malfunctions, check for loose speed sensor or controller wiring—these simple checks can prevent issues.

[StDallas]

When using the Buick GL6 to pick up my kids, I often utilize the cruise control for its simplicity and safety: once the speed exceeds 40, press the cruise button on the steering wheel to activate the system. Accelerate to the desired speed, such as 60, then press the 'SET' button to lock it in. Adjust speed slightly with the '+' and '-' buttons, and cancel by lightly tapping the brake. Remember to turn off the system after use. This feature is ideal for long-distance driving to reduce fatigue but is not recommended for city roads. The GL6's intuitive interface makes it easy for beginners to master quickly.

[ReedMarie]

I'm quite interested in the technical features of the Buick GL6, including the cruise control. Usage: When the vehicle speed reaches above 40 km/h, press the cruise button on the steering wheel to activate it. Then adjust to the desired speed and press "SET" to fix the system. During the process, the "+" or "-" buttons adjust the speed in increments of 1 km/h. Press the brake or cancel button to temporarily deactivate, and use the "RES" key to resume. To turn it off, simply press the original button again. From a technical perspective, the Buick GL6's controller integrates feedback from the speed sensor to ensure stable operation; during routine maintenance, it's important to check if the sensor interface is dirty, as this can easily affect functionality. It's recommended for use on highways and safer to deactivate in complex road conditions.