How to use the cruise control on BMW Z4?

1 Answers
JordanAnn
07/30/25 4:32am
The method to use cruise control on BMW Z4 is: first turn on the cruise control button to 'on', then press the accelerator to reach the desired cruising speed, push the control lever downward once, and release the accelerator. When the speed is above 30 km/h, press the 'set' button to activate the cruise control function of the BMW. The BMW Z4 has a length of 4336mm, width of 1867mm, height of 1322mm, wheelbase of 2470mm, and fuel tank capacity of 52 liters. It is equipped with a 2.0T turbocharged engine with a maximum horsepower of 197ps, maximum power of 145kw, maximum torque of 320nm, and is paired with an 8-speed automatic manual transmission.
Was this review help?
10
5
Share
More Forum Discussions

How to reset the maintenance mileage of Changhe Q35?

To reset the maintenance mileage of the Changhe Q35, it is necessary to use specialized computer equipment at a repair shop after maintenance, as manual reset is not possible. Below is more information about the Changhe Q35: 1. Exterior: The Changhe Q35 is a new car with a youthful design. The front grille features chrome accents and is connected to the headlights on both sides. The front bumper has a mesh grille, and the rear lights also include chrome decorations. 2. Features: The Q35 is equipped with a high-strength "ring-shaped" safety body, one-piece stamped doors with front, rear, and side impact beams, an anti-theft alarm system with sound and light, pre-tensioning seatbelts with force limiters and a six-airbag system, the latest Bosch 9.1 version ESP electronic stability program, which includes subsystems such as ABS+EBD, EBA brake assist, HHC hill start assist, and CBC cornering brake control.
4
4
Share

What to Do When the Focus Engine Warning Light Stays On?

If the engine warning light is on, you can follow these steps to address the issue: First, check whether the engine is running normally. Look for symptoms such as shaking, black smoke emission, or difficulty starting. If any of these issues are present, avoid restarting the engine. Particularly, do not restart the engine if the red warning light is on. If the engine is running normally and the vehicle can be driven, visit a service station as soon as possible to diagnose the problem. A service station can easily read the fault codes using a portable diagnostic tool, allowing for targeted repairs based on the fault information. If the engine is running normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may help reset the warning light. Generally, the engine warning light may illuminate due to the following seven reasons: Sensor Failure: This includes sensors such as the coolant temperature sensor, crankshaft position sensor, air flow sensor, intake air temperature sensor, and oxygen sensor. If these sensors are damaged, have poor connections, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel or Oil Quality Issues: Failing to use the fuel or oil specified by the manufacturer may cause engine wear, leading to the warning light turning on. Poor Combustion of Air-Fuel Mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion. Turbocharger Problems: Issues with the intake boost system or turbocharger can also trigger the warning light. The most common problem is a damaged turbocharger, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake System Issues: If the vehicle's intake system is compromised, it may lead to clogged engine passages, potentially triggering the warning light. A dirty or uncleaned air filter can cause intake problems. Exhaust System Issues: Exhaust system faults can also cause the warning light to illuminate. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is the most frequent culprit, often damaged by leaded gasoline, improper lubricant additives, physical impacts, or fuel system malfunctions. Anti-Theft System Malfunction: If the vehicle's electronic anti-theft system fails or if there is a mismatch between the anti-theft controller and the engine control unit, the engine may not operate correctly, and the warning light will turn on.
8
4
Share

Will points be deducted if the speed falls below 20 km/h in Subject 3?

Points will be deducted. Relevant details are as follows: 1. Reason for deduction: In Subject 3, the matching speed for third gear is generally between 25 km/h and 35 km/h, with a minimum not below 20 km/h and a maximum not exceeding 40 km/h. Once these limits are exceeded, there is a 5-8 second buffer period to adjust gears. As long as the corresponding speed is restored within the specified time, no points will be deducted. 2. Test content: The road driving skills test for Subject 3 typically includes: preparation before starting, simulated lighting test, starting off, driving in a straight line, gear shifting operations, changing lanes, pulling over to the side, driving straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving.
3
0
Share

What to Do When the Seat Belt Buckle Won't Insert?

It is necessary to replace the seat belt buckle and plug. Here is the relevant information: 1. Importance of seat belts: The seat belt in a vehicle is a crucial safety barrier. In the event of a traffic accident, the seat belt effectively protects the occupants inside the vehicle and works in conjunction with the airbag to prevent injuries. If there are any issues, they should be promptly repaired or replaced. 2. Function of seat belts: The seat belt in a motor vehicle is designed to prevent secondary injuries to passengers during a collision by restraining the occupants. Also known as a safety belt, it is one of the most effective and economical safety devices available. Seat belts are widely applicable across various vehicle models.
7
4
Share

Is the driver's license fee paid by oneself or the driving school?

Generally, the fee is paid by the driving school as a whole, and the registration fee collected by the driving school usually includes the driver's license fee. Below are some considerations for registering for the driver's license test: 1. Verify the driving school's qualifications: A legitimate driving school not only has a business license but also possesses a road transport permit, among others. 2. Whether the enrollment personnel make arbitrary promises: Ensure your interests are not infringed upon. 3. Whether there are additional charges: Pay attention to whether the price is all-inclusive and whether there are any other extra charges along the way. Typically, the more all-inclusive the price, the less likely there are to be random fees.
19
4
Share

What procedures are required for transferring ownership of a new car?

Transferring ownership requires the identity proof of the current vehicle owner; proof and documentation of the vehicle ownership transfer; the vehicle registration certificate; the vehicle license, and other certificates. Below is the relevant information: 1. Legal provisions: According to Article 19 of the 'Regulations on the Registration of Motor Vehicles,' the current vehicle owner must fill out an application form and present the vehicle for inspection when applying for a transfer of registration. 2. Obtain the vehicle qualification certificate and keep the triplicate purchase invoice: The vehicle qualification certificate is crucial as it is necessary for vehicle registration. Currently, some car 4S stores delay providing the vehicle qualification certificate, which can postpone the registration process. The 4S store will issue a triplicate purchase invoice, which must be kept properly as it will be needed for subsequent registration procedures. The invoice consists of red, yellow, and blue copies, generally requiring the submission of the red and yellow copies while retaining the yellow copy for personal records.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.