How to Use the Cruise Control on Baojun 510?
3 Answers
Baojun 510 cruise control usage is as follows: 1. Press the ON/OFF key to activate the system, at which point the cruise control indicator light on the instrument panel will illuminate. 2. Accelerate to the desired speed, then press the SET key. At this point, you can release the accelerator pedal with your right foot, and the speed will be set at the current speed. 3. You can fine-tune the speed by pressing the "RES+" and "SET-" buttons. 4. There are three ways to deactivate the cruise control: stepping on the brake, pressing the CANCEL key, or pressing the ON/OFF key. 5. If the cruise control is canceled by stepping on the brake or pressing the CANCEL key, you can press the RES key to resume the previous cruise control speed. The Baojun 510 is also equipped with an 8-inch LCD capacitive touchscreen, keyless entry and one-button start, automatic climate control, leather-wrapped steering wheel, and power-adjustable, foldable, and heated exterior mirrors for added convenience and practicality.
I just bought a Baojun 510, and its cruise control is super easy to use and fuel-efficient. When you're driving on the highway at speeds above 40 km/h, first press the cruise control button on the center console—the dashboard light will indicate the system is activated. Then, stabilize your speed to the desired level and press the SET button to lock it in. While driving, if you want to fine-tune the speed, press the RES button to accelerate or the SET button to decelerate, making adjustments effortless. If traffic gets complicated or you need to stop, simply step on the brake, and the cruise control will immediately cancel. After a red light, press the RES button to resume your original speed. Safety tip: Avoid using it in rainy, snowy, or congested conditions, and always stay focused on the road ahead. Overall, the operation is straightforward, making long drives more comfortable and less tiring. I recommend practicing a few times to familiarize yourself with the button locations.
Driving the Baojun 510 on long trips, I found the cruise control operation to be very intuitive. First, accelerate the vehicle to over 40km/h, then locate and press the cruise control switch near the steering wheel to activate the system. At this point, the dashboard will display that cruise control is ready. When the speed stabilizes, press the SET button to lock in the current speed. Once cruising, if you need to fine-tune the speed, use the RES button to increase or SET button to decrease, with responsive adjustments. Canceling is convenient at any time—just apply the brakes to deactivate, and after a green light, a light press of the RES button resumes the previous speed. This feature is quite energy-saving, but don't rely on it entirely; manual control is safer when road conditions change. Personally, I think it's easy to get familiar with this feature in a new car, but remember to occasionally check the tires and lights to ensure everything is in order.
