How to use the cruise control on Audi A4L?
3 Answers
Audi A4L cruise control usage method is: 1. Pull the lever inward to enter standby cruise mode, the dashboard will display the cruise icon; 2. When the vehicle speed reaches the specified speed, press the cruise control button to activate cruise; 3. During active cruise, pulling the lever upward increases speed while pulling downward decreases speed; 4. Pushing the lever outward temporarily exits cruise function, pulling inward resumes cruise; 5. Pushing the lever all the way outward completely exits cruise. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, fuel tank capacity 56l, and curb weight 1615kg.
I've been driving an Audi A4L for several years, and the cruise control is super convenient on the highway. First, you need to get the car moving, and the speed should reach at least 40 km/h, otherwise the system might not activate. Then, look for the button with the speedometer icon on the right side of the steering wheel and press it to activate the cruise control—it will remember the current speed. To adjust the speed, use the plus and minus buttons on the steering wheel; each press changes the speed by about 1-2 km/h. If a car suddenly appears in front of you, don’t hesitate to hit the brakes—this will temporarily cancel the cruise control. Once the road conditions improve, press the resume button to automatically return to the previously set speed. I’ve also found Audi’s system to be quite responsive, especially for reducing leg fatigue on long trips, but remember not to overuse it in urban areas or on curves—always stay alert and maintain control. After practicing a few times, you’ll get the hang of it. Safety first is always the right approach.
Safety is key when using cruise control, and I think beginners should pay special attention to the steps. After starting the Audi A4L, find an empty stretch of highway and drive for a while, ensuring the speed reaches at least 50 km/h for stability. Press the cruise control switch icon on the steering wheel (usually on the right side), and a prompt tone will indicate activation. Once the speed is set, don't just sit back—use the up and down buttons to make fine adjustments, such as pressing the up button to accelerate or the down button to decelerate. In case of an emergency, always hit the brakes immediately, which will instantly deactivate cruise control; to resume, simply press the resume button. Don't forget to check if the system is functioning properly, such as ensuring the buttons have good contact. While it can help reduce driving fatigue, avoid relying on it for too long, especially in heavy traffic—stay in control yourself.
