How to Use the Cruise Control on a Toyota Highlander?

1 Answers
LaBennett
07/30/25 12:56am
Toyota Highlander's cruise control usage method is: 1. Press the SET button to activate cruise control after setting the speed; 2. Use the plus (+) and minus (-) buttons on the control lever to adjust vehicle speed; 3. Press CANCEL to deactivate cruise control, or press RES to resume cruising; 4. The system automatically deactivates when the driver applies the brake pedal. Functions of cruise control: 1. Reduces unnecessary speed fluctuations to save fuel; 2. Alleviates driver fatigue. The Toyota Highlander's dimensions are: 4890mm in length, 1925mm in width, and 1715mm in height. It is equipped with a 3.5L V6 inline-four cylinder engine delivering a maximum power of 140kW.
Was this review help?
2
2
Share
More Forum Discussions

What does the D gear mean?

The D gear stands for Drive, which is the gear used when driving forward. Introduction to D gear: The transmission will automatically shift between 1st gear and overdrive (equivalent to 1st to 4th gears) based on speed and throttle conditions. This gear is used for normal road driving. Due to different designs in various countries' vehicle models, the "D" gear generally includes gears from 1st to high gear or 2nd to high gear, and it will automatically shift based on changes in speed and load. Additional information about D gear: Since automatic transmissions determine the gear based on throttle position and vehicle speed, the shifting speed varies depending on how the accelerator pedal is operated. If the accelerator pedal is pressed down quickly when starting, the upshift will occur later, providing stronger acceleration. Once a certain speed is reached, quickly releasing the accelerator pedal will cause the car to upshift immediately, resulting in reduced engine noise and improved comfort.
2
4
Share

Where is the ambient temperature sensor located on Dayun heavy-duty trucks?

The ambient temperature sensor is located in front of the radiator or in front of the vehicle's bumper. Function of the ambient temperature sensor: The ambient temperature sensor is a device used to detect the ambient temperature around the vehicle. The control system compares the outside temperature with the interior temperature and then determines the control method. The ambient temperature sensor provides the ECU with the outside temperature signal, and the ECU uses this signal to regulate the interior temperature to meet the comfort needs of the occupants. Types of ambient temperature sensors: There are various types of ambient temperature sensors. Based on the measurement method, they can be divided into contact and non-contact types. According to the sensor material and electronic component characteristics, they are classified into thermistors and thermocouples. The ambient temperature sensor is a crucial component for controlling the interior temperature. Regular vehicle maintenance should be performed, and the condition of automotive components should be periodically inspected during normal vehicle use.
19
1
Share

Can Mr. Muscle Glass Cleaner Be Used as Automotive Glass Washer Fluid?

Cleaning the car windshield requires the use of automotive-specific glass washer fluid, and Mr. Muscle glass cleaner cannot be used as a substitute. Reasons why cleaner cannot be used: The cleaner can form scale deposits in the water reservoir and rubber pipes, affecting normal spray function. Additionally, when the cleaner is sprayed onto the windshield, exposure to wind and sunlight can also lead to scale formation. Prolonged use may increase friction between the glass surface and wiper blades, potentially causing irreparable scratches on the glass. Composition of glass washer fluid: Professional automotive glass washer fluid consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It offers functions such as dirt removal, antifreeze, anti-static properties, and corrosion prevention.
1
1
Share

What Causes the Engine to Overheat When Accelerating?

Engine overheating when accelerating is usually caused by air trapped in the radiator, which can be resolved by bleeding the air. Here are the methods to remove air from the radiator: Check the coolant: Open the engine compartment when the engine is cold and check if the coolant level is sufficient. The coolant reservoir has MAX and MIN level marks. If the level is below the MIN mark when the engine is cold, add coolant according to the marked levels on the reservoir. Idle circulation: Drain the old antifreeze and flush the fluid channels with clean water. Let clean water continuously flow through the engine cooling system, then start the engine and let it idle for 3 to 5 minutes to circulate the water. Continue adding clean water until the water flowing out is clear.
17
1
Share

Where is the vehicle inspection location in Langfang?

Vehicle inspection in Langfang is located in the Industrial Park of Yongqing County, Langfang City. Annual inspection for small vehicles: Family-owned small vehicles with 7 seats or less (including 7 seats) are exempt from on-site testing within 6 years from the date of purchase, but it is necessary to collect the annual inspection sticker and environmental protection sticker from the vehicle management office every two years. After 6 years, an annual inspection is required. Annual inspection for vehicles over 15 years old: They need to be inspected twice a year. If the mileage exceeds 500,000 kilometers, the inspection frequency increases to four times a year. Importance of vehicle annual inspection: Relevant authorities have always placed great emphasis on this, and the regulations are particularly strict. Vehicles that fail to meet the standards must be scrapped directly according to the regulations. For vehicles that have been in use for over 15 years, there are more potential safety hazards. The twice-a-year inspection is designed to identify existing problems with the vehicle and also considers the safety of the vehicle owner.
10
0
Share

Does Quickly Driving onto a Curb Affect the Car?

Quickly driving onto a curb does affect the car, with specific impacts as follows: Tire Impact: First, the tires, as they directly contact the curb, improper operation can cause sidewall ply breakage or bulging. The damage is minimized when the tire is perpendicular to the curb. Wheel Rim Impact: Next, the wheel rims. If the curb is too high, it can scratch or dent the rims, affecting their appearance and even causing deformation. Suspension and Linkage Impact: Then, the suspension and various linkages are prone to deformation. If the curb is excessively high, it may lead to undercarriage scraping, potentially damaging the oil pan, front bumper, and other components.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.