How to Use the Cruise Control on a Golf?
4 Answers
Here are the steps to use the cruise control on a Golf: 1. Activate CCS: Move switch 1 on the turn signal lever to the ON position, or press the cruise control activation button on the multifunction steering wheel. (This starts the system but does not store the cruising speed or control the vehicle speed yet.) 2. Enable CCS control: Press the lower end SET/- of button 2 on the turn signal lever, or press the SET button on the multifunction steering wheel. (The current speed is stored as the cruising speed, and the system will control the vehicle at this speed.) 3. Temporarily deactivate CCS control: Move switch 1 on the turn signal lever to the CANCEL position, or press the CNL button on the multifunction steering wheel. Alternatively: Press the cruise control deactivation button on the multifunction steering wheel or step on the brake pedal. (This temporarily deactivates CCS control, but the set cruising speed remains stored in the system.) 4. Resume CCS speed control: Press the upper end RES/+ of button 2 on the turn signal lever, or press the RES button on the multifunction steering wheel. (This reactivates the control function, and the system will again control the vehicle speed based on the stored cruising speed.)
I've driven a Golf for several years, and the cruise control is a real lifesaver on long drives. Before using it, make sure your speed is above 40 km/h—it's most suitable for highways. Starting it is simple: locate the cruise control lever or button on the steering wheel and flip it up to turn it on. Then, accelerate to your desired speed, say 80 km/h, and press the SET button to lock in that speed. After that, you can fine-tune the speed using the + or - buttons, adjusting by about 5 km/h per press. If you encounter traffic or need to brake, lightly pressing the brake pedal will automatically cancel it, or you can manually stop it by pressing the CANCEL button. To resume later, just press the RES button to return to your original speed. The key is to stay focused and avoid drowsiness—manual control is safer on hilly roads. I always check if the system responds before each use and avoid using it in rain or snow. It saves energy while keeping you alert.
As someone who loves long-distance driving, I find the Golf's cruise control incredibly practical. The basic steps are just three: locate the lever or button on the steering wheel, flip it to activate the system. Then accelerate to your desired speed and press the set button to lock it in. To adjust the speed, use the + or - buttons for small increments. If you hit the brakes, the cruise control will automatically deactivate. Resuming your original speed is also easy—just press the dedicated resume button. Remember to only use it on highways; it's too risky in busy city traffic. It saves your legs and makes driving more relaxed. I often remind beginners to practice on short stretches to get familiar with the controls, which can improve efficiency once mastered.
The key to using cruise control is safe operation. Ensure the vehicle speed exceeds 30 km/h and only activate the system on flat highways. The steps are simple: first turn on the switch, accelerate to the target speed, then set it. Adjust speed with +/- buttons or cancel by braking. Avoid using it in heavy traffic, stay alert for manual control. Regularly check if the control lever functions smoothly to prolong system lifespan.
