How to use the cruise control on a Golf?

What metals are inside a car exhaust pipe?

There is stainless steel inside the car exhaust pipe. Below are specific details about the car exhaust pipe: 1. Meaning: The car exhaust corrugated pipe, also known as the car exhaust flexible hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler, providing a flexible connection for the entire exhaust system. This helps reduce vibration and noise, facilitates installation, and extends the lifespan of the exhaust muffler system. 2. Structure: It is mainly used for light vehicles, compact cars, and buses. Its structure consists of a double-layer corrugated pipe covered with a steel wire mesh sleeve, with clamping rings on both straight end sections. To enhance noise reduction, the corrugated pipe can be equipped with an expansion joint or mesh sleeve inside. The primary material is stainless steel SUS304, while the clamps and connecting pipes can be made of stainless steel or aluminized steel.

3

0

Share

What is the oil capacity for the BMW X1?

The BMW X1 requires 4.5 liters of engine oil. The original equipment manufacturer (OEM) oil brand for the BMW X1 is Shell. For subsequent maintenance and oil changes, you may choose from brands such as Shell, Mobil, Castrol, or Total. The official BMW X1 manual recommends using oil with the specification 5W-30. Any oil that meets this specification can be used. The viscosity of engine oil changes with temperature, so it's important to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means the oil can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as providing better lubrication under high-temperature conditions. The method for changing the oil in a BMW X1 is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow any remaining oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply a small amount of oil to the gasket of the new oil filter and hand-tighten it clockwise. Add the new engine oil through the oil filler cap on the engine's valve cover. Typically, about three-quarters of a standard oil container is sufficient. Start the engine and let it run for 5 minutes, then check for any leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs. After turning off the engine, remove the oil dipstick and check that the oil level is within the standard range.

19

2

Share

How often should the spark plugs be replaced for the Sagitar 1.4T?

The replacement interval for the Sagitar 1.4T spark plugs depends on the type of spark plugs used. If platinum spark plugs are used, they should be replaced every 40,000 kilometers. For ordinary nickel alloy spark plugs, replacement is recommended every 20,000 kilometers, while iridium spark plugs can last between 60,000 to 80,000 kilometers before needing replacement. Under normal maintenance conditions, spark plugs should be replaced when the vehicle has traveled 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is advisable to refer to the owner's manual for specific recommendations. Steps for replacing spark plugs: Open the engine hood and remove the plastic cover of the engine. Disconnect the high-voltage ignition wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. During removal, check for any external debris like leaves or dust and ensure the area is clean. Insert the new spark plugs into the spark plug holes, hand-tightening them first before using the socket wrench to secure them. Reinstall the high-voltage ignition wires in the correct firing order, then reattach the cover.

16

3

Share

Which models under Geely are equipped with three-cylinder engines?

Geely's three-cylinder models are as follows: Emgrand GS: The car is 4440mm long, 1833mm wide, with a wheelbase of 2700mm, equipped with a 1.5t turbocharged engine (direct injection) paired with a wet dual-clutch transmission. Main/active safety configurations include anti-lock braking system (ABS), brake assist (EBA/BAS, etc.), LED daytime running lights, hill start assist, auto hold, side safety airbags, child seat interface, collision warning/active braking, electronic stability program (ESP/DSC, etc.), tire pressure monitoring, electronic brakeforce distribution (EBD), traction control (ASR/TCS, etc.), lane keeping, rear parking radar, etc. Emgrand GL: The front row is equipped with a dual-zone automatic air conditioning control system, with dimensions of 4725×1802×1478mm and a wheelbase of 2700mm, powered by a 1.5t turbocharged engine (direct injection) paired with a wet dual-clutch transmission (DCT). Main/active safety configurations include traction control (ASR/TCS/TRC, etc.), anti-lock braking system (ABS), brake assist (BA/EBA/BAS, etc.), collision warning/active braking, tire pressure monitoring, electronic stability program (ESP/DSC/VSC, etc.), lane keeping assist (LKAS), auto hold, side safety airbags, hill start assist, child seat interface, rear parking radar, electronic brakeforce distribution (EBD/CBC, etc.), LED daytime running lights, etc. Vision X1: The car measures 3778mm in length, 1663mm in width, and 1519mm in height, with a wheelbase of 2353mm. The wheels are 175/60R15, equipped with a 1.3L naturally aspirated engine producing a maximum power of 88 horsepower and a maximum torque of 120.0Nm, and a 1.0L naturally aspirated engine producing a maximum power of 68 horsepower and a maximum torque of 88.0Nm. The transmission system is paired with a 5-speed manual or 4-speed automatic transmission.

6

4

Share

What is the Aeolus car?

It is Dongfeng Aeolus, an independent mid-to-high-end brand under Dongfeng Motor Group, established in 2009. Dongfeng Motor Corporation Limited (English name: Dongfeng Motor Corporation) is a limited liability company solely funded by the state and established in accordance with the law. The State-owned Assets Supervision and Administration Commission of the State Council of the People's Republic of China acts as the institution responsible for fulfilling the obligations of the investor, representing the State Council in performing the duties of the investor in accordance with the law, based on laws, administrative regulations, and the authorization of the State Council. Dongfeng Aeolus' main models include the Yixuan, Dongfeng Aeolus AX7, Yixuan MAX, Yixuan GS, Dongfeng Aeolus A30, Dongfeng Aeolus S30, Dongfeng Aeolus AX4, Dongfeng Aeolus A60, Dongfeng Aeolus AX3, Dongfeng Aeolus H30, etc. Yixuan 2022 230T Automatic Tiger Roar Edition: Dimensions are 4660x1812x1490 (mm). Dongfeng Aeolus AX7 2022 Mach Edition 1.5T Manual DF21: Dimensions are 4660x1880x1680 (mm). Yixuan MAX 2021 Super Dad Hybrid Edition: Dimensions are 4797x1870x1475 (mm). Yixuan GS 2021 230T Automatic Star Chasing Edition: Dimensions are 4610x1830x1600 (mm). Dongfeng Aeolus A30 2016 1.5L Manual Practical Edition: Dimensions are 4530x1730x1490 (mm). Dongfeng Aeolus S30 2014 1.5L Automatic Premium Edition: Dimensions are 4526x1740x1465 (mm). Dongfeng Aeolus AX4 2020 200T DCT Luxury Edition: Dimensions are 4200x1780x1622 (mm). Dongfeng Aeolus A60 2018 1.6L DCT Luxury Edition PLUS: Dimensions are 4680x1720x1515 (mm). Dongfeng Aeolus AX3 2019 1.6L Manual Enjoy Edition: Dimensions are 4520x1740x1562 (mm). Dongfeng Aeolus H30 2014 CROSS 1.5L Manual Gratitude Edition: Dimensions are 4351x1760x1528 (mm).

1

0

Share

Is it necessary to install ETC if I don't frequently use highways?

Installing ETC is necessary. According to the State Council's regulations, vehicles without ETC will not enjoy toll discounts starting from 2020. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual channels. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated first. During free holiday periods, highways can still be used, and ETC users passing through ETC lanes will not be charged. ETC Billing Principle: There will be one or more ETC lanes on highways. Through microwave-specific short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, the purpose of paying tolls without stopping at toll stations is achieved. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Green and low-carbon, vehicles passing through toll stations without stopping can reduce noise and exhaust emissions, minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also explicitly set the goal of "achieving a 50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of comprehensive transportation development during the "13th Five-Year Plan" period. More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. There will also be exploration of deep integration between ETC systems and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-to-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications.

8

2

Share

How to use the cruise control on a Golf?

What metals are inside a car exhaust pipe?

What is the oil capacity for the BMW X1?

How often should the spark plugs be replaced for the Sagitar 1.4T?

Which models under Geely are equipped with three-cylinder engines?

What is the Aeolus car?

Is it necessary to install ETC if I don't frequently use highways?

How high is a car's exhaust pipe from the ground?

Is it necessary to tint car windows?

What does the 'H' in car lights mean?

How Far Can a Car Go After the Last Fuel Bar Runs Out?