How to use the cruise control in the Magotan car?
2 Answers
The method to use the cruise control in the Magotan car is: 1. During vehicle driving, push the speed cruise control lever located at the left rear of the steering wheel to the 'on' position; 2. When the vehicle reaches the desired speed, press the 'set' button on the control lever to save the current speed and enter cruise mode. Taking the 2020 Comfort Magotan as an example, its body dimensions are: length 4865mm, width 1832mm, height 1471mm, with a wheelbase of 2871mm and a fuel tank capacity of 66l. The front suspension of the 2020 Comfort Magotan is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.
To use the cruise control in the Magotan, first ensure the vehicle is traveling on a smooth road at a speed between 40-150 km/h. Press the cruise control switch on the steering wheel to activate the system, and wait for the indicator light on the dashboard to illuminate. Then, accelerate to your desired speed, such as setting it to 100 km/h on the highway, and press the SET button to lock the speed. After that, if you need to fine-tune the speed, you can press the RES button (up button) to increase speed or the SET button (down button) to decrease speed, with each press changing the speed by approximately 1-2 km/h. To temporarily pause the cruise control, press the CANCEL button or lightly tap the brake—the system will deactivate but retain the settings. To fully exit the cruise control, press the switch again to turn it off. I often use this feature during long-distance driving as it saves effort and fuel, but remember not to use it in congested or rainy conditions to avoid delayed reactions and ensure safety. Regularly check the vehicle’s sensors to prevent any malfunctions.
