How to Use the Cruise Control in the Honda Avancier?

1 Answers
EdenAnn
07/30/25 3:33am
Here are the steps to use the cruise control in the Honda Avancier: 1. Activate Cruise Control: Press the CRUISE button on the steering wheel, and the CRUISEMAIN indicator on the instrument panel will illuminate, indicating that the cruise control is ready for use. 2. Set the Speed: Accelerate the vehicle to the desired speed, then remove your foot from the pedal and press the RES/+/SET/- switch. The set speed is confirmed the moment you release the switch, and the CRUISE-CONTROL indicator will light up. The multimedia information screen will display the set speed. 3. Adjust the Speed: Toggle the RES/+/SET/- switch up or down to increase or decrease the cruising speed. Each toggle changes the speed by 1.6 km/h; holding the switch continuously increases or decreases the speed until you release it. 4. Cancel Cruise Control: Press the CANCEL button, press the CRUISE button, or step on the brake pedal to cancel the cruise control. After the cruise system is turned off, the cruise control indicator and related speed display will turn off.
Was this review help?
11
5
Share
More Forum Discussions

Where is the child lock on the Mercedes-Benz GLC?

The child lock of the Mercedes-Benz GLC is located on the rear doors, with the switch button positioned on the door armrest of the driver's seat. The electronic child lock allows the driver to directly press the button to control its activation and deactivation. Some mid-to-low-end models use a mechanical control switch, where the owner can manually lock it using a key or engage the child lock via a toggle lever. Below is some related information: 1. Introduction: The Mercedes-Benz GLC can essentially be considered as the coupe version of the GLK. 2. Power Specifications: In terms of power, the new vehicle will include multiple power configurations. The gasoline engine options are expected to include a 1.8T, a 2.0T, and a 3.0-liter V6. 3. Space: When the rear seats are fully folded down, the transition is smooth, featuring a long engine hood, 5 driving mode options, and a trunk space that offers more spacious seating and storage capacity compared to the previous generation model.
1
5
Share

What does National IV EFI mean?

National IV EFI means that in order to meet the National IV standard, electronic fuel injection technology is basically required. The relevant introduction of the National IV standard is as follows: Introduction to National IV Standard: The National IV standard is an environmental protection standard formulated with reference to the Euro III standard. The higher the number, the stricter the standard, meaning that the higher the number, the relatively lower the pollution from exhaust emissions. Domestic vehicles produced between 2005 and 2008 were mostly National III vehicles. The so-called National III standard refers to China's third-stage vehicle emission standard, equivalent to the Euro III emission standard. Impact of vehicles not meeting the National IV standard: When a vehicle fails to meet the National IV standard due to factors such as fuel quality, the OBD system will automatically issue an alert and switch to the system default mode. The engine will not function properly, and the vehicle can only be inspected and maintained at authorized service stations. Moreover, the OBD system cannot be modified after the vehicle leaves the factory.
18
0
Share

What is the reason for the increase in Mercedes-Benz eco mode display after startup?

Mercedes-Benz eco mode display increasing after startup means the fuel-saving mode is activated. ECO is a symbol of green driving mode, which can be divided into passive and active forms. Modes: Generally, it can be divided into passive ECO driving mode and active ECO driving mode. The passive ECO driving mode mainly serves as a reminder and guidance function. The active ECO driving mode usually has a button. After activation, a series of driving-related settings will change, such as a smaller throttle opening corresponding to the same accelerator pedal depth (the accelerator becomes less sensitive), the transmission shift logic prioritizing fuel economy (earlier upshifts), and some vehicles will also adjust the air conditioning output power simultaneously. When to enable ECO: Enabling ECO is most effective in urban congested traffic conditions. In urban congested traffic, strong power is not required, and the frequent stop-and-go leads to higher fuel consumption. Enabling ECO mode at this time can not only reduce fuel consumption but also make driving more comfortable.
3
3
Share

What are the new driving license regulations in 2020?

2020 driving license new regulations include implementing nationwide "one-certificate examination" for small vehicle driving licenses. Applicants can apply for and obtain a small vehicle driving license anywhere in China with just their resident ID card, without needing to submit residence registration certificates, etc. Below are specific details about driving license regulations: 1. Classification: The Ministry of Public Security officially issued the "Motor Vehicle Driving License Business Operation Standards," introducing a graded system for motor vehicle driving licenses. The licenses are divided into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P. 2. Renewal rules: If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the 6-year validity period of their driving license, they can renew it for a 10-year validity period; if they maintain this record during the 10-year validity period, they can renew it for a long-term valid driving license.
15
1
Share

What is the insurance company's standard for scrapping flood-damaged vehicles?

There is no separate scrapping standard for flood-damaged vehicles. The criteria for scrapping them are the same as those for vehicles damaged in other ways. When a vehicle is damaged in a traffic accident, insurance companies generally adhere to a 'repair-first' principle. More information about insurance companies' standards for scrapping flood-damaged vehicles is as follows: 1. Repair costs exceed the vehicle's value: When the repair costs exceed 80% or more of the vehicle's value, the insurance company will proceed with a total loss claim. 2. Compliance with Article 4 of the 'Mandatory Scrapping Standards for Motor Vehicles': Registered motor vehicles that meet any of the following conditions shall be mandatorily scrapped: if they still fail to meet national safety technical standards after repair and adjustment; or if they continue to emit pollutants or noise exceeding national standards after repair, adjustment, or the application of control technologies. If any of these conditions are met, the vehicle should be mandatorily scrapped, whether through insurance claims or self-funded repairs.
18
1
Share

How many kilometers can a Mercedes-Benz GLC run on a full tank of fuel?

Approximately 700 kilometers. Here is some additional information: 1. Fuel gauge meaning: The fuel gauge on the dashboard has 5-6 segments, each representing the remaining fuel capacity in the tank. Generally, when the fuel gauge shows two segments remaining, it's time to refuel. 2. Fuel tank capacity measurement unit: The international standard uses liters (L) as the unit for measuring a car's fuel tank capacity. Different countries have their own standards for fuel tank capacities. 3. Relationship between engine displacement and fuel tank volume: Typically, small cars have a fuel tank capacity of 35-45 liters, while mid-sized cars have a capacity of around 55-75 liters. A full tank usually allows for a driving range of about 500 kilometers. Depending on the engine displacement, lighter cars with smaller engines have relatively smaller fuel tank capacities, while heavier cars with larger engines have larger fuel tank capacities.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.