···
Log in / Register

How to Use the Cruise Control in Magotan?

1 Answers
DeMaximus
07/24/25 10:22pm
Instructions for using the cruise control buttons in Volkswagen Magotan: 1. The CNL button is used to cancel cruise control, while 0/1 turns it off. Press the RES button to resume cruise control when needed. 2. The cruise control function is not activated immediately after turning it on. The SET button is for setting the desired speed (Note: Cruise control cannot be used at speeds below 30km/h). 3. The silver button in the middle adjusts the cruise control speed, with the left side for deceleration and the right for acceleration. 4. The driver can control the following distance using the middle scroll wheel. Precautions for using cruise control: 1. The driver must manually apply the brakes when using cruise control; only adaptive cruise control will automatically brake. However, electronic devices may not always be sensitive, so drivers should remain vigilant of their surroundings. 2. Cruise control deactivates when the driver presses the brake pedal. The previously set speed remains stored in the system and can be directly resumed. 3. Using cruise control can be dangerous on winding, steep, bumpy, slippery roads, or in heavy traffic. It is advisable to turn off cruise control and drive manually. 4. On steep downhill slopes, the vehicle may exceed the set speed. Always use the brake to assist in slowing down or turn off cruise control completely.
Was this review help?
7
2
Share
More Forum Discussions

How many colors does the Enclave have?

The Enclave comes in 6 colors: Shadow Gray, Summit White, Eclipse Blue, Obsidian Black, Iron Gray, and Merlot Red. The Enclave is a mid-to-large SUV launched by Buick. To meet the diverse needs of consumers, this vehicle offers multiple body color options. Below are some key details about the Buick Enclave: 1. The official fuel consumption of the Buick Enclave is 8.1L per 100km. 2. Positioned as a mid-to-large SUV, the Buick Enclave is built on GM's mid-to-large luxury SUV platform. Its design follows the concept car previously unveiled, with a body length reaching 4981mm. It is powered by a 2.0T turbocharged engine (codenamed LSY) with a maximum power output of 169kW (230PS).
10
4
Share

How soon should the first maintenance be done for the Volkswagen New Bora?

Volkswagen New Bora's first maintenance should be done within six months or 7,500 kilometers, whichever comes first. The first maintenance follows the principle of whichever comes first. However, it is advisable to perform the first maintenance earlier because during the break-in period, the engine cylinders undergo a wearing-in process, leading to more metal particles in the engine oil and oil filter, and the oil gets dirty faster. Continuing to use it without maintenance can increase engine wear. Relevant information about the first maintenance is as follows: 1. The first maintenance refers to the initial service after the new car is used. It is the first inspection after the initial break-in period. It involves replacing the lubricating oil used during the break-in period and the oil filter, as well as inspecting major components. 2. The first maintenance time is calculated based on the date of vehicle delivery. According to relevant regulations, exceeding the first maintenance date is considered as voluntarily giving up the right to the first maintenance.
18
1
Share

What is the relationship between Venucia and Dongfeng Nissan?

Dongfeng Venucia is a sub-brand under Dongfeng Nissan. In September 2010, Dongfeng Nissan officially launched its own brand "Venucia", and the birth of "Dongfeng Venucia" marked the beginning of Dongfeng Nissan's entry into the "dual-brand" operation stage. The following is a related introduction: On the one hand, Dongfeng Venucia adheres to Nissan's most advanced global technology and quality standards, introducing products of the "NISSAN" brand. On the other hand, the independent brand "Venucia" will take "respect" as its belief, with "affinity" and "trust" as its brand characteristics. Relying on Dongfeng Nissan's strong strength, resource accumulation and excellent team, it will provide Chinese consumers with more valuable products and services.
20
3
Share

What Are the Reasons Why a Hand-Pull Gasoline Engine Won't Start?

The reasons why a hand-pull gasoline engine won't start: The carburetor is clogged, clean it with compressed air and Chefoo cleaner; the gasoline is impure or there is water or other impurities in the fuel tank. The engine may start at idle but becomes unstable when accelerating, and stalls when the throttle is opened further. Clean the fuel tank and replace it with genuine 93-octane gasoline; for models with an oil alarm, the engine oil must not be insufficient, otherwise this situation is prone to occur when the oil level is near the minimum critical point. Severe carbon buildup on the piston and cylinder, poor compression, requires complete disassembly and cleaning. Below is an introduction to gasoline engines: 1. Composition: A gasoline engine is an internal combustion engine that uses gasoline as fuel and ignites via an electric spark. It generally adopts a reciprocating piston structure and consists of the main body, crankshaft connecting rod mechanism, valve system, fuel supply system, lubrication system, and ignition system. 2. Advantages: Gasoline engines are lightweight, have low manufacturing costs, produce less noise, and have better cold-start performance. Gasoline engines are lighter than diesel engines, have lower manufacturing costs, produce less noise, and have better cold-start performance, but they have lower thermal efficiency and higher fuel consumption rates.
7
4
Share

How long does it take to charge a dead car battery at idle speed?

The charging time for a dead battery at idle speed is as follows: 1. If the engine speed is 1500 rpm, charging for 20 minutes can provide enough power to start the engine once. 2. Charging at 1500 rpm for 30 minutes can provide enough power for one start the next day. 3. If charging at 1500 rpm for more than 60 minutes, the battery can be fully charged. 3. It is best to charge while driving rather than at idle speed, as prolonged idling can cause engine wear. Below are some points to note about avoiding charging a dead battery while stationary: 1. Prolonged idling can lead to carbon buildup in the engine combustion chamber. 2. Stationary charging is not ideal, as the generator produces very weak power at low speeds. Only during normal driving will the generator's current reach the designed standard. 3. For safety reasons, idling a car produces exhaust fumes, which can be toxic in an unventilated environment, posing a significant risk of accidents. 4. If the generator is faulty, stationary charging will not work, and the solution is to drive to a repair shop for inspection.
16
3
Share

What brand is the Jetour X70?

Jetour X70 belongs to the Jetour brand, with details as follows: 1. Jetour is a new product line under Chery Holdings. 2. Jetour is not a premium brand of Chery but focuses more on lifestyle. 3. Jetour's current customer base consists mainly of young people in third-tier cities and towns. Below is additional information about the Jetour X70: 1. The Jetour X70 is the first SUV under the Jetour brand, positioned as a mid-size 7-seater SUV. 2. The Jetour X70 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 108kW (147PS) at 5500rpm and a peak torque of 210N•m between 1750-4000rpm. 3. For transmission, it offers a choice between a 5-speed manual or an 8-speed automatic transmission, featuring an engine with 37.1% thermal efficiency paired with an 8AT gearbox.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.