How to Use the Civic Mileage AB?

What is the best engine oil for Buick Verano maintenance?

For Buick Verano maintenance, you can choose engine oil brands such as Mobil, Castrol, and Shell. The recommended engine oil specification for the Buick Verano, as stated in the manual, is 5W-30. Any oil that meets this specification can be used. The viscosity of engine oil changes with temperature, so it is important to pay special attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The second number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Buick Verano is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply some new oil to the gasket of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the oil filler cap on the engine valve cover. Typically, fill about three-quarters of the oil container. Start the engine and let it run for 5 minutes, then check for any leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick to check if the oil level is within the standard range.

1

4

Share

What are the differences between the Tiguan and Tiguan L?

Volkswagen launched the Tiguan L in December 2016. The previous Tiguan is referred to as the old Tiguan. The main differences between the two are as follows: 1. Appearance: The old Tiguan is more conservative, while the Tiguan L is more avant-garde; 2. Space: The Tiguan L offers more space than the old Tiguan. 3. Price: The Tiguan L is approximately 15,000 to 30,000 RMB more expensive than the old Tiguan. 4. Configuration: The old Tiguan does not come with a central control display screen. The Tiguan L features a 6.5-inch central control screen, along with USB ports and an SD card slot. Additionally, the Tiguan L includes a keyless start system and engine start-stop technology, which are not available in the old Tiguan. 5. Powertrain: The Tiguan L utilizes a hybrid injection system, which allows for more complete fuel combustion, thereby improving fuel economy. The old Tiguan, on the other hand, is equipped with a turbocharged engine.

5

2

Share

Why does the car stall when the clutch is pressed?

When the car stalls upon pressing the clutch, it is because the vehicle encounters certain resistance during idle operation. Depressing the clutch simultaneously disengages the power output between the engine and the transmission. If the clutch is released too quickly afterward, the transmitted power becomes insufficient to move the vehicle, causing the gears to lock up and the engine to stall. Below is relevant information about the clutch: 1. The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. 2. The clutch is a common component in mechanical transmission systems, allowing the drivetrain to be engaged or disengaged as needed. 3. Installed between the engine and the gearbox, the clutch is the assembly in the automotive drivetrain that directly interfaces with the engine. Typically mounted together with the engine crankshaft's flywheel group, it functions to cut off and transmit power between the engine and the drivetrain. 4. For manual transmission vehicles, the clutch is a critical component of the powertrain, responsible for disconnecting and connecting power to and from the engine.

7

3

Share

Where to turn on the ambient lighting in the Mercedes-Benz C260L?

The ambient lighting in the Mercedes-Benz C260L can be turned on by adjusting the multifunction option on the right button of the multifunction steering wheel. Click on settings, then enter the vision and lighting section, select ambient lighting, and press the checkmark button on the steering wheel to turn it on. Car ambient lighting is a decorative lighting feature, usually in colors like red, blue, and green, primarily designed to make the cabin more dazzling at night, enhance the atmosphere, and create interior ambiance. The Mercedes-Benz C260L has body dimensions of 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm. The sport version of this car is equipped with a direct-injection turbocharged four-cylinder engine, delivering a maximum power of 201 horsepower and a peak torque of 229 Newton-meters.

1

5

Share

How Does a Diesel Engine Work?

Diesel engine working principle is as follows: 1. During the intake stroke, the diesel engine inhales pure air. When the compression stroke is completed, diesel fuel is pressurized to over 10MPa by the fuel injection pump and injected into the cylinder through the fuel injector, where it mixes with the high-temperature compressed air in a very short time to form a combustible mixture. 2. Diesel engines have a high compression ratio (generally 16-22). When compression is completed, the air pressure in the cylinder can reach 3.5-4.5MPa, while the temperature can reach 750-1000K (whereas in a gasoline engine at this stage, the mixture pressure would be 0.6-1.2MPa and the temperature would reach 600-700K), significantly exceeding the auto-ignition temperature of diesel. 3. After being injected into the cylinder, the diesel fuel mixes with the air and spontaneously ignites and burns almost immediately. The pressure in the cylinder rapidly rises to 6-9MPa, and the temperature also increases to 2000-2500K. Under the push of the high-pressure gas, the piston moves downward, driving the crankshaft to rotate and perform work. The exhaust gas is then discharged into the atmosphere through the exhaust pipe.

4

Share

What is the chassis code for the BMW 4 Series?

The chassis code for the BMW 4 Series is F32. Here is some information about the BMW 4 Series: 1. The BMW 4 Series is a mid-size car series produced by the German automaker BMW, with three models available: the all-new BMW 4 Series Coupe, the BMW 4 Series Gran Coupe 2020, and the BMW 4 Series Convertible 2019. 2. Model introduction: ① Exterior: Uses a soft-top material that has been popular in convertible history, reducing weight by approximately 40%. ② Interior: The design of the all-new 4 Series Convertible is largely consistent with the hardtop version, featuring a sporty wraparound design and equipped with BMW's latest full LCD instrument panel and iDrive system. ③ Powertrain: The all-new 425i and 430i models are equipped with two different power-tuned 2.0T turbocharged four-cylinder engines, with the former having a maximum power of 135kW and the latter 190kW, both paired with an 8-speed automatic transmission.

5

4

Share

How to Use the Civic Mileage AB?

What is the best engine oil for Buick Verano maintenance?

What are the differences between the Tiguan and Tiguan L?

Why does the car stall when the clutch is pressed?

Where to turn on the ambient lighting in the Mercedes-Benz C260L?

How Does a Diesel Engine Work?

What is the chassis code for the BMW 4 Series?

How to reset the maintenance reminder for Kia K5?

How many kilometers should the Lavida spark plug be replaced?

What is the original engine oil model for the Buick Excelle?

What to Do When the Starter Fails to Start?